FITLAND 28x 20 LED Bathroom Vanity Mirror Installation Guide

FITLAND 28x 20 LED Bathroom Vanity Mirror

Install Tools Needed

1. Drill
2. Tape measure
3. Phillips screwdriver
4. Maker pen
5. Spirit level
6. Goggles
   (The packaging does not include the above items.)

Installation Steps

1. Use tape measure, spirit level, marker pen and electric drill according to the distance to locate the hole.
2. After drilling the hole knock the expansion bolt into the hole.
3. Screw the hanger delivered to the corresponding position. (Pay attention to the direction upwards)

4. Connect the line power cord to the mains (L-L N-N ).
   If there is a wall outlet on the wall where the mirror ready to install, then you can be used directly by plugging in the plug.

5. Insert the hanger on the back of the mirror into the corresponding hanger on the wall, and the fixing is completed.

6. You also could choose vertical hanging or horizontal hanging. Turn on the power and check all function. The installation completed.

Lighting & Control

• The integrated light source and system are not support customer to replace. Please do not change by yourself.
• The lights(and defogger)are controlled by touch sensor on mirror surface to turn on/off and adjust brightness and color temperatures. Keeping the mirror lights on then you can also control it on & off by a wall switch.
  • Key1:DIM(Light Switch)
  • Press to control the light ON/OFF, long press to adjust the brightness(range10%-100%).
  • Double click to adjust the color temperature (3000K/4000K/6000K)
  • Key 2: Defog Switch
    Press to control the defog function ON/OFF. [Defog time need: Winter(5-10 Mins) Summer(2-3Mins)]

About Power Auto Off

To help you save energy the LED mirror has designed a particular function. The power (light/defogger) will be auto off after an hour using (start timing for the last operation).

Electrical Safety Instructions

Installation must be a professional who has qualified/registered electrician. If you have no experience on installation please do not try by yourself. We will not responsible for it.

Warning

• Read this instruction carefully before and during the installation process to ensure that your product is installed safely and correctly.
• Cut off the power supply before installation and maintenance. According to IEEE regulations, the installation of the bathroom must comply with the appropriate area. This product is suitable for zone2 and outside zone, not suitable for zon0 or zonel. Although this product has iP44 protection, it is only suitable for U50.

Cleaning

1. Turn off the mirror power when cleaning.
2. Do not use abrasive or solvents when cleaning the mirror. We suggest to use a soft damp cloth to wipe off water spillages.
3. Do not submerge the mirror in water.

Package

1. Expension bolts*4
2. Screws*4
3. User manual*1
   There are all items in the package. Please check whether the accessories are all in the package which your order before installation.

About Installation

1. Please wear suitable goggles when drilling.
2. Be careful when using power tools near the water.

Recommendations for residual current devices (RCD)

1. Be careful with hidden cables or pipes.
2. If you need to drill on the surface of the tile, please must be careful to prevent the drill bit slipping off. Stick a piece of tape on the wall to prevent the drill bit shift before marking the fixing holes.
3. Do not place very hot or cold items on or near the glass surface, unless adequately insulating materials are used to prevent such items touch the glass.The mirror glass nominal thickness is 4mm. If the mirror glass broken please contact us in time ([email protected]).
4. This product should be kept away from curtains and other fabrics. Do not cover the mirror with anything because the energized product will be heated. We recommend that close it after using, please do not open it for a long time.
5. It will be more dangerous if it is installed incorrectly. (Please keep this user manual for future reference.)

About Wiring

• This product is manufactured to class I category and requires an earth connector.
• Also, we will provide an additional 2m US 2-pin plug for easy connection with exist wall sockets.

About Working Status

• When the touch switch backlight is blue, it means the function is on; when the touch switch backlight is white, it means the function is off.
• Closed state; (when defogging is needed, it is not suitable to run for a long time)

NEED HELP ?
If there are missing any accessories or any questions, please contact us in time through the Amazon order or below methods. Answer within 24 hours.
Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>