SOUNDPEATS S5 Wireless Earbuds Over-Ear Hooks Bluetooth Headphones User Guide
- June 6, 2024
- SoundPEATS
Table of Contents
SOUNDPEATS S5 Wireless Earbuds Over-Ear Hooks Bluetooth Headphones
First use
Please open the lid of the charging case, take out the two earbuds, and tear off the insulating film on the earphone charging contacts, then put the earbuds back into the charging case.
- 0pen the charging case, take out the two earbuds, the earbuds will automatically power on and start to paring with each other. One earbud’s white LED Is on, another one Is blinking with white and red light, which Indicates that the earbuds has entered pairing mode,
- Turn on the bluetooth of your device, and please choose ·soUNDPEATS ·1n the list to pair, then the earbuds will connect with your device.
Reset
- Clear the pairing data from your device.
- Put both earbuds Into the charging case. Make sure they are In charging status.
- Then long press the MFB of both earbuds for lO seconds at the same time until the LED indicator In both earbuds flash white and red twice. The reset finish.
Wearing
- Identify the le and right earphones. Adjust the earphones to flt your ears.
- Right and wrong way of wearing.
Product Diagram
Control
Power on| Automatic: Open the charging case. take out the earbuds, the earbuds will automatically power on Manual: Long press the MFB for 1.5 seconds In shutdown
status
---|---
Power Off| Automatic: Place the earbuds back Into the charging
case.
Manual: Long press the MFB for 10 seconds in working status.
Pk:ly/Pause| Double tap MFB
1/olme-| Tap MFB(L) once
1/olme+| Tap MFB(R) once
Pk:ly Previous| Press the MFB(L) for 1.5 seconds
Pk:lyNext| Press the MFB(R) for 1.5 seconds
Answer/Hmg up phone
cct
| Double tap MFB(l/R)
Reject phone oall| Press the MFB(l/R for 1.5 seconds
Swttch between two oals| Long press the MFB(l/R )for 2 seconds
Mmuci� enter hto pairhg
mode
| Long press the MFB(l/R )for 6 seconds
Activate vcice asslstmt| Triple tap MFB(l/R )
Q&A
Ql: What does the LED indicator mean when the earphone is charging?
During the charging, the LED shaw red light, it will turn off when full
charged.
Q2: What does the LED Indicator on the charging case mean?
During the charging, the Indicator Ilg ht flashes to show the remaining power
of the charging case. The first white LED light flashes to show 0-24%
remaining power of the charging case.\ The first white LED light Is on and the
second LED flashes to show 25%-49% remaining power. Two whe LED lights are on
and the third LED flashes to show 50%-74% remaining power of the charging
case. Three white LED lights are on and the fourth LED light flashes to show
75%-99% remaining power of the charging case. 4 llghts are all on when full
charged.
Q3: How to charge the charging case?
- Connect to a Type-C charging adapter charge lt.(Chorglng current does not exceed lA).
- When not using for a long time, please charge It once every three months at least.
Q4: Why does the earphone still connect to the moblle phone alter putting II
back Into the charging case 7
- The charging case has no power. The earphone will not power off In charging case when charging case hos no power.
- Make sure the earphone is properly placed in the charging case. Please try to clean the contact area between the charging box and the earphones with a soft cloth. keep the charging metal piece and pin clean.
QS: Why Is the playtime not as described?
A single charge not allow the earbuds to lost 20 hours. 5 hours playtime
per charge and another 3 recharges by charging case.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>