qnect QN-WP01E Wi-Fi Smart Plug with Energy Monitor User Manual
- June 5, 2024
- qnect
Table of Contents
qnect QN-WP01E Wi-Fi Smart Plug with Energy Monitor
Description
- On/off button
- Reset button
- On off indicator
- Connection status indicator
Before you start
- The functionality of WiFi connected product depends on the stablity of your home network. We are not responsible for the stability and capability of your private network, and therefore the optimal functionality of our products. If any questions about your private WiFi network, contact your WiFi providor.
- We are continuously improving and updating our products and product information. It’s therefore possible that there is a slight difference between the description in this manual to the operation of the product. If something is different or not clear, always check our website for the most current manual
Use
- Download and install the app “qnect home“ from Apple App Store or Google Play Store on your mobile device.
- Make sure you are connected to your WiFi network (2.4GHz) and your phones’ bluetooth is turned on.
- Launch the app “qnect home”.
- Create a new account or log in to your existing account.
- Plug in the smart power plug.
- Tap “+” to add the device.
- When bluetooth is enabled on your smartphone the app will find the device itself. Follow the installation steps within the app.
- When bluetooth is not enabled, follow below steps.
- Select Comfort > QN-WP01E from the list of products.
- If the status indicator does not flash: Press and hold the reset button for 6 seconds until the light flashes quickly.
- If the light flashes: Confirm in the app.
- Confrm the Wi-Fi network and password.
- Enter the device name
Note : The device name will also be used by Amazon Alexa and Google Home
Safety
- To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the device for its intended purposes.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
- The device is suitable for indoor use only. Do not use the device outdoors.
- Do not expose the product to water or moisture. Do not touch the device with wet hands.
Declaration
Eltra nv, Pachtgoedstraat 2, 9140 Temse, Belgium, hereby declares that the product comprising: QN-WP01E – 414000055 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The original declaration of conformity can be requested at info@eltra.be
Warning!
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Clean the outside of the device using a soft, damp cloth.
If you need further help visit www.qnecthome.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>