JBL EBEAIRSPTNCRBLK82 Epic Air Sport ANC True Wireless Earbuds User Manual
- June 6, 2024
- JBL
Table of Contents
EBEAIRSPTNCRBLK82 Epic Air Sport ANC True Wireless Earbuds
User Manual
FIRST TIME SETUP
-
AUTO-CONNECTING EARBUDS
A. Take earbuds out of the charging case and remove stickers. B. Press and hold 3+ seconds on each earbud. Blinking blue and white light on one earbud will indicate ready to pair to new device. -
CONNECTING BLUETOOTH
Select “Elam Air Sport ANC” in your device settings. Voice prompt “Bluetooth connected” followed by solid white lights will indicate you are connected.
ADDING NEW/ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluetooth from any previously connected device. Tum ON Bluetooth from
a new device. Take earbuds out of the case. Earbuds will automatically enter
Bluetooth Pairing. Select °Epic Air Sport ANC” M new device settings to
connect.
CONTROLS
VOLUME DOWN: Single Tap SIRI
(LOS) OR “OK GOOGLE” (ANDROID) : Double Tap
BE AWARE / ANC ON / ANC OFF: Press and hold 1+ second
EQ CHANGE: Triple Tap
ANSWER: Single Tap Left or Right
HANG UP: Double Tap Left or Right
REJECT INCOMING CALL Double Tap and hold 1+ seconds Left or Right
VOLUME UP: Single Tap
PLAY / PAUSE: Double Tap
TRACK FORWARD: Press and hold 1+ second
EQ CHANGE: Triple Tap
MUSIC / MOVIE MODE: Press and hold both touch sensors simultaneously for
3+ seconds
POWER OFF WITHOUT CHARGING CASE: Turn off your Bluetooth from your device
settings. The earbuds will then power off after 3 minutes.
DOWNLOAD THE APP
Customize Epic Air Sport ANC features and update the latest software.
Download the JLab Air ANC App in Apple/Google Play Store
AUTO-POWER ON/OFF
Placing the earbuds in the charging case will power OFF earbuds and start
charge Blue lights indicate earbuds are charging and will turn OFF when fully
charged.
when taken out of the charging case they will auto power ON and connect.
WIRED CHARGING
Connect the Epic .6Jr Sport to a computer or USB 5v 1A (or less) output
device. WIRELESS CHARGING
Place the charging case on a wireless charging platform.
LEDs pulse white when charging and stay solid white when fully charged.
QUICK TIPS
- The left or right earbud can be used independently for music and phone calls. Simply choose one and take it out from the case to connect.
- Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on Bluetooth on the chosen device to connect.
- Fully dry off earbuds before putting them in the charging case to avoid any damage to the case.
For full User Manual and troubleshooting, please visit JLABAUDIO.COM
FITTING
VOICE PROMPTS
“Hello”: Power ON
“Ready to Pair”: Epic
Air Sport ANC is ready to pair to your Bluetooth device
“Be Aware”: Hear your surroundings
“ANC OW”: Noise-canceling ON
“ANC OFF”: Noise-canceling OFF
“Bluetooth Connected”: Earbud is connected to the device
“Battery Full”: 100-80%
“Battery Medium”: 80-20% ”
Low Battery”: Less than 20%
(When power decreases to 10%.
“Low Battery” will play one time)
“Goodbye”: Power OFF am—see a
EQUALIZER MODES
“ JLab SIGNATURE” JLab ” signature sound with amplified vocals and bass
BALANCED” Even sound with no additional sound enhancements
** “BASS BOOST” Amplified bass and sub-bass
“BEEP” Custom EC) setting (download the JLab Air ANC App to customize).
Customize each E0 setting by downloading the JLab Air ANC App in Apple/Google
Play Store
WARNING
** Fully dries off the earbuds before placing them in the charging case. If
the earbuds are damp or wet, this will cause damage to the charging case. The
warranty will be voided if the charging case shows damage by water/sweat.
TROUBLESHOOTING:
No audio in one earbud or earbuds are disconnected (Manual Reset)
- Enter your Bluetooth device settings and forget the Epic Air Sport ANC. Fig
- Keep the earbuds in the charging case and on ONE earbud quickly tap the touch sensor 7x times. The light blinks blue 4 times. Fig ®
- Repeat with another earbud. Quickly tap the touch sensor 7x times. The light blinks blue 4 times. Fig 0
- Take both earbuds out of the charging case. Wait for the Left earbud to turn solid white and Right to blink blue/white. You are now ready to pair to your Bluetooth device.
The Bluetooth device does not connect/reconnect
- Enter your Bluetooth device settings and forget the Epic Air Sport ANC. Fig a
- Turn OFF then ON Bluetooth. Fig b
- Take the earbuds out of the case. Wait for one to turn solid white and one to blinking blue/white.
- Select “Epic Air Sport ANC” in the device’s settings to reconnect.
Instructional videos at: JLABAUDIO.COM/MANUALS
FREE GIFT
when you register this product ilabaudio.com/register Product updates I How-to
tips I FAQs & more
Gift for US only. No APO/FPO/DPO addresses.
3 MONTHS FREE TIDAL
With purchase. Visit jlabauclio.com/tidal
US Compliance
FCC Information
FCC ID: 2ANYV- EASNC2
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop using your product. Changes or modifications not expressly by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EU Compliance
PEAG LLC dba JLab Audio hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of the RED directive.
A copy of the EU Declaration of Conformity is available at
jlabaudio.com/compliance
JLab Audio
2281 Las Palmas Drive, Suite 101, Carlsbad, CA 92011, USA
The symbol above indicates that this product and/or battery should not be
disposed of with household waste. When you decide to dispose of this product
and/or its battery, do so in accordance with local environmental laws and
guidelines.
Battery Caution & Disposal Information
Please take care of your battery. Do not; disassemble, burn, puncture, crush
or bend your battery. Improper operation of the battery may produce smoke. In
such an event, ventilate the area. Extinguish any flames with carbon dioxide,
dry-powder fire extinguisher, or cover with sand or mud. Take care to avoid
conditions of excessive moisture for prolonged periods and do not immerse. Do
not expose to temperatures above 50°C/122°F. Charge battery fully before
storage or if stored for longer than three months. Disposal
At the end of its life, please take care to dispose of this product
responsibly. Electronic products and batteries contain materials that can be
harmful to the environment. Please do not dispose to unsorted waste. Take your
electronic waste to a designated collection or recycling facility to be
recycled properly. Your local council authority will be able to tell you where
your nearest facilities are. There may be one at your local supermarket.
JLab can help you recycle. Learn more
jlabaudio.com/recycle
Contact Us
If you’re unsatisfied with your purchase, please contact us and we’ll take
care of you! You can contact our US-based customer support team:
Website: jlabaudio.com/contact
Email: support@jlabaudio.com
Phone U.S.: +1 405-445-7219 (Check
hours jlabaudio.com/hours)
Phone U.K.: +44 (20) 8142 9361 (Check hours
jlabaudio.com/hours)
Visit jlabaudio.com/warranty to initiate a
return or exchange.
Visit jlabaudio.com/safety to learn how to
safely use, including the proper tip installation.
Our team is constantly improving your product experience. This model may have
new features or controls which are not detailed in this guide.
For the latest version of the manual, please visit
www.jlabaudio.com/manuals
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>