ORBIT OR1066BT Bluetooth Speaker Instruction Manual

OR1066BT Bluetooth Speaker
Instruction Manual

INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE USE

SPECIFICATION:

• DC: Built-in rechargeable Lithium-ion battery 300mAh
• BT distance: 10m
• Frequency response range: 90Hz-20 KHz
• Sensitivity: 80db+2db
• Speaker: t45mm 403W
• Playing time: 2-3 hours

FUNCTION DIAGRAM

1. ON/ OFF
2. Single-click: play, pause
3. V+/ NEXT
4. V-/ PREV
5. Hands-free call
6. USB recharge port

General Functions

Master Device and to perform pairing action (detail refer to the chapter about pairing)
Next Previous| Press is for the next music. Press is for previous music.
Volume up| Long press the for volume up.
Volume down| Long press the for volume down.
Charging| Plug the charger into the micro-USB port at the back of the device.(Red LED is on)
Phone Call| Press `to answer calls
Play / Pause| Press once to play/pause music

CONNECTION:
Press the power button to turn on the speaker, you will see the LED light flashing, then you can search for “orbit speaker” on your phone to pair, after connected successfully you can play music; If you want to switch pairing to other mobile devices, then you need to cut off the connection of existing equipment into the pairing mode.
USB CHARGING:
Using the USB cable connect with computer or USB power Adapter (5V 1.0A) to charge the speaker, if the light is red it means it’s charging successfully, the light will be off when power is full, Besides it usually takes about 3 hours to charge.

PRODUCT OVERVIEW:

• A stylish appearance brings you endless enjoyment.
• Wireless link function, lifting shackles of cable.
• Hands-free function, release both hands.
• Strong grade sucker , making it adsorb freely.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The device has been evaluated to meet the general RF exposure requirements. The device can be used inthe portable exposure condition with restriction
Warning:

• You must select a qualified charger from a reliable source
• You must charge the Bluetooth speaker if it has not been for than 12 mothers

Bluetooth wireless technology streams audio from all your device
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc, and any use of such marks by Orbit Innovations is under license. Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>