CORONA R6FA-SB 2.4Ghz FASST Compatible S.BUS Receiver User Manual
- June 6, 2024
- Corona
Table of Contents
Connect cam with receiver
Take Corona R6FA-SB as an example, you can use another receiver, but need to adjust to PWM mode, for your receiver, please check the receiver manual.
Connect PWM signal cable to corresponding receiver channel, GND to GND
Controller Setup
In this example we connect the camera to receiver CH5, controller setup as follows: Take FUTABA T14SG as an example
- Frequency match according to receiver manual
- Setup controller as the pics
- Map CH5 to the button, we map CH5 to SG stick in this example, you also can use another channel for mapping.
- Remote control zoom Use SG stick to control zoom, switch SG stick to down, the cam is default 1x zoom, switch SG stick middle, the cam is 10x zoom.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>