Smith Corona BT200 Bluetooth Headset User Manual

Bluetooth Headset User’s Manual BT200

Available in Monaural or Binaural

Introduction

The unit is a wireless comfort Bluetooth® headset for mobile phones and offices. When mobile phones replace ordinary phones at the office, you need a comfortable and ergonomic solution for those who spend long hours on the phone. The unit is such a solution, a truly comfortable headset with good sound quality, built for comfortable all-day wearing. As an accessory, there is a USB Bluetooth dongle for the PC. With the dongle, you can connect your headset to a computer and use it as an audio device for VoIP applications, for example, Skype™.

Features

• Bluetooth Version 4.2, with improved data transfer, security, and connectivity.
• Up to 20 hours of talk time.
•  At least 96 hours stand by time
• Up to 30 meters working range (class 2)
• Voice guidance
• Volume control buttons
• Answer button
• Dedicated microphone mute button
• Last number re-dial
• Low battery indication
•  Adjustable headband and soft ear cushion for all-day wearing comfort
• LED status indication
• Charging cradle(Option)

Overview

What’s inside

Direct Charging from the USB port of PC

If the headset has been out of use for some item, it may take up to 2 hours to charge it fully. The normal charging time is 2-3 hours. Low battery is indicated by the flashing red LED on the headset.

Headset Hanger: For your convenience, fix the headset hanger at any place available.

Optional Accessories

Both the charging stand and micro USB cable can be plugged into either a computer or wall charger.

Attaching the headband

To attach the microphone boom arm to the headband, align the triangle shape on the microphone boom arm with the triangle shape on the headband and push to click into place. The microphone boom arm will then rotate to your required position.

Detaching the headset
To detach the microphone boom arm from the headband, gently push the microphone speaker from inside the ear cushion. This will pop the microphone
boom away from the headband

IMPORTANT: Do not pull on the microphone boom to remove it from the headband.

Positioning the Microphone

The microphone boom arm is flexible, so you can gently bend the boom and position it to suit the curve of your face

Holding the headset, rotate the headband to bring the boom close to your cheek.

The ideal placement for the microphone is usually at the corner of your mouth, not in front of it, and about an inch from your face.

Be sure that the side of the microphone is pointed toward your mouth.

Turning the headset on and off

Turn on the headset
Press and hold the answer’ button for 2 seconds. Release the button when the LED flashes 3 times andPower on’ is heard in the speaker.

Turn off the headset
Press and hold the answer’ button for 3 seconds. Release the button when the LED flashes red 3 times andPower off’ is heard in the speaker.

Pairing

Prior to using the headset, it must be paired and connected to another Bluetooth device, such as a mobile phone. For specific instructions, check the user’s guide of your phone.

General procedure

• Turn on Bluetooth on your phone
• Put the headset in pairing mode (make sure the headset is switched off, press and hold the answer button for 1 sec until the LED flashes red rapidly)
• Perform a search for Bluetooth devices on your phone.
• Connect to >>device logo<< when found.
• Blue LED is On and `Pairing done, Connected’ is heard in the speaker when pairing is completed

NOTE: If your phone requires a pairing code please use 0000. Different phones have different ways to handle Bluetooth devices. Read the user’s manual of your phone for more info. Some phone for more info. Some phones will connect to the headset automatically when it is within range, for example when you return to your office. For other phones, it may be necessary to reconnect manually when the connection has been broken.

The pairing mode is active for 3 minutes. After that, the headset will enter standby mode.

Set Voice Prompt Language

There are two different firmware versions for different languages. Each version supports 3 different languages for users. The first version has English, Spanish, and French voice prompts. The second version offers German, Italian, and Dutch voices.

To select languages, the headset should not connect to the Bluetooth host. When the headset is out of synchronization, press the answer’ button twice and selected languages will be heard. To change it, press theanswer’ button twice again and then the next available languages will be informed. If announced languages want to be used, just stay and use them.

Using the headset

Answer a call

• Press the `answer’ button briefly.

Reject a call

• Press the answer’ button for 1 sec while incoming call, andCall rejected’ is heard in the speaker.

Make a call

• Dial the number on the mobile phone and press the answer button briefly.

End a call

• Press the answer button briefly or end the call on the mobile phone.

Last number redialing

• Press the answer button briefly twice and you can hear `Re-Dialing’ from the speaker.

Volume adjustment

• Press volume up/Volume down to adjust the listening volume. There is a small notch on each volume button that makes them easy to find. The headset listening volume can also be adjusted on the phone.

Note that high listening volume settings may cause an echo or other noise on the line, for one or both parties on the line. Try to lower the listening volume if this is the case.

Important! ­ High listening volume settings may be harmful to your hearing.

Mute On/Off

• Press and release the mute button and `Mute On’ is heard in the speaker.
• Press again to resume the call and `Mute Off’ is heard in the speaker.

Technical information

Safe and efficient use
Do not expose your product to humidity, liquid, or extreme temperature conditions. Such conditions or other rough treatment such as dropping or bending the product may damage it. Do not use any accessories or chargers other than originally intended for use with this product. Neither headset nor charger contain any user-serviceable parts, and must not be opened.

A Bluetooth device uses radio signals to communicate with other devices. The power of this radio signal is low, maximum 0.001 Watts. Do not use the product where it is forbidden, for example in airplanes, at hospitals, in blasting areas, or in explosive atmospheres. Radio signals may interfere with other electronic devices, especially if these are not shielded.

Permanent hearing loss may occur if headsets are used at high listening volumes for longer periods of time. Set the volume to a safe level. You can adapt to high listening volume over time, especially in a noisy environment where the level of sound may seem normal even if the volume is high. Reduce the time you use a headset with high listening volume.

Battery information

The device is equipped with a rechargeable Lithium-polymer battery. A new battery will need a few charging cycles before it can reach maximum capacity. A fully charged battery will lose its charge over time even if the headset is not used.

Battery capacity and life span may be reduced if the device is exposed to extremely high or low temperatures, for example, if it is left in a car. A device with a cold or hot battery may stop working until it is back to normal (room) temperature. Battery capacity at temperatures below -0oC is reduced.

Never dispose of batteries in open fire since they may explode. Always dispose of use batteries and electronic devices according to local recycling regulations.

FCC Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC notification to users
This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference, the user is encouraged to try to correct the interference by consulting with a dealer or an experienced technician for technical assistance.

Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WARNING & SAFETY INFORMATION

The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Help and tips

Troubleshooting
If you have problems connecting the headset to your phone, do as follows:

• Check that the headset is charged, turned on, and within 10 meters of the phone.
• Check that Bluetooth is switched on your phone.
• Check that the headset is listed as a headset device in your phone and also connected. You may need to re-connect to the headset
• Try removing the headset from the phone, then pair and connect again.

Some features are not possible to use with a certain phone:

• Check the user manual of your phone for missing settings or functions that need to be activated.
• Different mobile phone manufacturers may implement Bluetooth functions in different ways. The unit should work with all phones that support the Headset and Hands-free Bluetooth profiles, but functionality may vary depending on the telephone model you use. You might also want to check for the latest firmware for your phone.

Maintenance

Your headset is a technically advanced device containing circuit boards and fine mechanics, made from top-grade components. To increase reliability and life span, always treat your headset with care.

• Do not expose the headset to moisture, liquids, rain, or dust.
• Store the product at a dry and dust-free location.
• For cleaning, use a dry cloth.
• Do not store a fully charged headset in the charging stand for longer periods of time.
• Ear cushions are available as spare parts.

Warranty and service

We will repair or replace, in our opinion, this product if found defective due to materials or workmanship within the warranty period beginning from the original date of purchase. This product is warranted by an authorized representative for the period specified.

The Original dated purchase receipt must be presented to the authorized service center when service is rendered. On all carry-in models, transportation to and from the service station is the responsibility of the purchaser.

This warranty does not cover damages due to accident, fire, flood, earthquake, and/or other acts of God; misuse, incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use, or damages that occurred in shipping. Exterior and interior finish, lamps, glass, plastic parts, and temperature probes are not covered under this warranty. Customer adjustments according to the owner’s manual are not covered under this warranty. This warranty is automatically void if the serial number is missing or altered.

Key Table

English->Spanish->French
Sync to BT Host| Redial(Smartphone Only)
2| Short Press| On Talk Mode| Mute On/Off
Music Listen| Pause On/Off
Long Press| No Condition| Pairing Mode
3| Short Press| On Talk Mode| Volume Up
Music Listen| Volume Up
Long Press| Music Listen| FF(SmartPhone Only)
4| Short Press| On Talk Mode| Volume Down
Music Listen| Volume Down
Long Press| Music Listen| BackWard(SmartPhone Only)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>