Corona AS-627 Bluetooth Speaker User Manual
- June 5, 2024
- Corona
Table of Contents
TWS
BOTTLE SHAPED TRUE
WIRELESS SPEAKER
USER MANUAL
Description:
Supports Bluetooth® enabled devices.
Speaker Specifications:
Power: 3W
Frequency: 100HZ — 20KHZ
SNR: ≥285db
Distortion: ≤0.1%
Charge voltage: 5V
Battery: 3.7V/300MAH
Speaker: 3W/4Ω
Bluetooth: JL4.2
Distance: 10M
Support: Bluetooth +AUX
Note
For the best performance and to prevent any damage or misuse please read
all of the information carefully prior to using the device.
General Functions
ON/OFF: Simply use the switch in the back to turn your speaker ON/OFF. Once it’s on it will automatically enter the Bluetooth pairing mode.
To connect to a Bluetooth-enabled device:
Before using the speaker for the first time, you must pair it with the
device.
Easy Pairing (First Time Pairing)
-
Tum your speaker on.
Once the speaker is on, it will automatically enter pairing mode. A blue LED indicator will start flashing. -
On the device you wish to pair, find the list of Bluetooth devices and ‘search for’ or ‘add’ new devices. Select “Corona” from the list of devices. If asked for the Pass/Pin code, please enter 0000 (4 zeros).
- Note: if your phone supports Secure Simple Pairing (SSP), you will not need to enter any code. 3. Once the devices are paired, the blue indicator will turn solid blue.
TWS feature
Tum on both speakers at the same time, wait 2-3 seconds: they will pair together automatically and one speaker will indicate “the Bluetooth device is connected successfully”. Then use your phone to search device “Corona” and pair.
Auto Reconnect
If the speaker is off (either accidentally or intentionally) while connected to a phone, the headset and phone will reconnect when the Corona Bottle speaker is turned back on while in range.
AUX Mode
To play music in AUX mode connect the AUX Cable (included) to the speaker and the other end to the music player device; the speaker will function as a sound amplifier.
Charging
Connect the USB end of the micro USB cable (included) into an AC adaptor or
computer USB port and the micro USB end to the port on the back of your
speaker. A solid red light will turn on to indicate the speaker is charging,
once it is fully charged the light will turn off.
*Note: Make Sure to Charge the Speaker for 3-4 hours before initial use.
Music control
You’ll be able to play/pause, control the volume and select songs through your smart device.
Product Diagram
- ON/OFF Button
- Aux 3.5mm Port
- Micro USB Charging Port
Warnings
Do not leave the product in a hot location.
Do not disassemble, modify or repair this product.
Do not allow this product to become In contact with water or
Package Includes
1x Corona Wireless Speaker Bottle Shaped
1x Charging Cable
1x AUX 3.5mm Cable
1x User Guide
www.CoronaUSA.com
Relax responsibly®. Corona Extra® Beer.
Imported by Crown Imports, Chicago, IL Corona® is a registered trademark, used
under license.
ALL RIGHTS RESERVED.
THIS ITEM IS INTENDED FOR PEOPLE OF LEGAL DRINKING AGE.
Made in Chaina
The Bluetooth? word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc., and any use of such marks by CJ Global is use under
license.
Other trademarks and trade names are those of their respective owners.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference, received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver,
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements.
To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body and fully supported by the operating and installation configurations of the transmitter and its antenna(s).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>