Shenzhen Tecson Trade Technology LR69Q68 2.1 Karaoke Speaker Instruction Manual

LR69Q68
INSTRUCTION MANUAL
2.1 Karaoke SPEAKER

MODES

Mode button serves to switch modes of the speaker: Bluetooth, radio FM and input devices, i.e, micro USB, Micro SD and AUX,

BLUETOOTH MODE

1. Power orvoff Switching the power on/off button to turn the speaker on/off.
2. Bluetooth connection

The PA speaker’s device name ts LR69Q68. When you enable the Bluetooth function in your bluetooth device like phone or tablet, search the device name “LR69Q68″. Select this device name to pair it with your bluetooth device. When the Bluetooth Pairing is successful, youwill hear a “Ding-dong” sound. Then you can play the music. in case of unsuccessful pairing, disable the Blustocth function and enable it again. If you turn off the PA speaker, but the Bluetooth on your smart phone remains active, when you power on the PA speaker again, the Bluetooth will be connected automatically,

RADIO MODE
To activate radio FM mode, switch the loudspeaker on, Use Mode button to select Radio. To search for available radio stations automatically, click and hold . Stations will be saved automatically. To switch stations, cick or . To start searching radio stations manually, click and hold .

AUX MODE
To activate AUX mode, switch the loudspeaker on, use Mode button to select AUX. Once you have selected this mode, sound will be played through AUX port,

SO MODE
To activate SD moda, switch the loudspeaker on, use Mode button to selact SD, Once you have selected this mode, sound will be played from previously installed micro SD memory card.

Microphone set up instruction

This wireless PA speaker comes with a UHF microphone. The UHF frequency is 902-928MHz, FCC compliant. The wireless receiver is bullt insidetha speaker, 80 you can use the micraphons once the batteries are installed and microphone and speaker are powered on.
You can also use additional wireless microphones by plugging the wireless receiver into the Mic Input 1 (#9 #10 in the speaker control panel) in the speaker.
Here are the set up steps for the microphone that comes with the speakes.

1. Install the AA battery in the correct direction. Battery level indicator is displayed in the microphone LCD screen. Change the batiery when the battery level is low.

2. Power on/off the microphone by long pressing the power button for about 3 seconds.

3. Change the microphone volume by pressing the microphone volume knob #12 in the lefl of speaker contral panel.

4. Change the echo if necessary. The dial for the echo control is in the tap of the speaker (#14 Echo dial in the speaker control panel).

5. Change the frequency in case of interference:
   (1) Power on the microphone.
   (2) Long press the SET button until you see the LCD screen starts to flash.
   (3) Before the LCD screen stops blinking, short press the SET button to change the frequency. wait for about 5 seconds until the screen stops blinking. The receiver inside the speaker syncs with the microphone at the selected frequency. There are 40 channels in each microphone. For A microphone, the screan raads A-01 ~ A-40 and for B microphone, it reads B-41 -B-80, For Q68 with single microphone, the microphone is B Mic and it feads B-41~B80.

6. When multi Q68 and mics are used at the same time, in order to avoid interference between each microphone, please pair and lock the Q68 speaker with its correspondent mics manually. Here is how:
   (1) Power on one of the mics and power on one 068 speaker.
   (2) Hold and press the SET button and the Power button for about 3 seconds.
   (3) When you see a LOCK icon lights up in the LCD screen, this mic fs locked with this O68 speaker,
   (4) Repeat the above process to pair and lock other mics,
   (5) Make sure each microphone works at a different frequency number to avoid intartarence with each other.

7. Battery installation position (note the positive and negative poles)

8. Microphone switch

9. Battery caver (tighten clockwise, loosen counterclockwise)

What you get in the box

Q68 with single mic
Q68 Speaker x 1
Remote control x 1
USB charging cable x 1
3.5mm to 3.5mm cable x 1
Handheld microphone x 1
User manual x 1| Q68 with dual mic
Q68 Speaker x 1
Remote control x 1
USB charging cable x 1
3.5mm to 3.5mm cable x 1
Handheld microphone x 2
User manual x 1
---|---

Specifications

Output power: 40w
Frequency: 60Hz-20KHz.
Controk: Volume/Bluetooth/Remote Controle USB/TF
Speaker driver size: 4° +3°*2
Product size: 336 134 x 260MM
Power supply: 5V=2A
Battery capacity: 7.4V, 3300mMAN
Charging time: 5-8 hours
Working tire: About 10 hours

Product features

1. Using the latest decoding chip, Bluetooth 5.0.
2. Support Bluetooth, Aux in, USB, TF card, FM.
3. 40W output power, super powerful sound
4. With microphone input, karaoke speaker, also amplifier
5. Compatible with personal computer, MP3, MP4, smart phone and other Smartphone devices.

Safety information

1. Keep the loudspeaker away from humid areas, high temperature, oil and other liquids.
2. Do not expose the product to direct sunlight and rain.
3. Set a suitable volume to avoid hearing impairment.
4. If you do not use the product for a long time, charge it at laast once per three months in order to avoid damage to lithium battery.
5. It is forbidden to disassemble, repair or open the product.
6. Keep out of the reach of children to avold electric shock or suffocation.

Description of functions

1. Mode switch: Mode button serves to switch modes of the speaker, Bluetooth, radio FM, and input devices, i.e. USB music, Micro SD and AUX.
2. Record Button: With storage file, lang press for recording. short press for recording play.
3. Previous track/station: Under USB/TF card mode. long press for fast backward; Under FM radio state, long press for manual search of last station
4. Play/Pause: In Bluetooth mode, long press for Bluetooth disconnecting and into pairing mode; In FM mode, long press for automatic searching and memory. In Aux in mode, Mute.
5. Next track/station: Under USB/TF card mode, long press for fast forward: Under FM radio state, long press for manually search of next station.
6. TF card (Micro SD) slot: Insert TF card to play music, t can decode MP3, WMA format, etc,
7. USB slot: Insert U-disk to play music, it can decade MP3, WMA format, etc.
8. Aux in; Audio input interface, which is used to give the machine external music audio source.
9. Mic input 1
10. Mic input 2
11. 5V 2A charging port.
12. Microphone volume control.
13. Volume control/power on/off.
14. ECHO.

USB MUSIC MODE
To activate USB music mode, switch the loudspeeker on, use Mode button to select
USB music. Once you have selected this mode. sound will be played from previously installed U-DISK,

CHARGING
To charge the battery, connect micro USB cable to the USB music port and then connect it to a USB power adapter.
Charging LED light indicator: Solid red light, on charging; Solid blue, fully charged.

Trouble Shooting

not enabled. Refer to the user manual of your device for how to enable the function.
2. This product is already connected with another Bluetoothenabled device. Disconnect that device and then try again.
3. The speaker is not in Bluetooth mode. Press the Mode button to select Bluetooth mode.
The volume is too low or distortion| Check the volume of the mobile phone, adjust the volume.
Music playing staccato or no sound| Check if the speaker and the mobile phone are in an effective distance or if there is an obstacle between.
Play/Pause not work| Check if the player is the phone built-in, some players downloaded later can’t be controlled by the speaker.
The speaker volume is low| Possible cause/ Solution: Turn the Bluetooth device volume to max.
The microphone sound quality is too bad| Change the echo for better microphone sound quality
Others| Please contact customer support if you need any other assistance. We can be contacted
at Support@sz-tecson.com.

Remote Control Instructions

1. Stand-by.

2. Switch mode.

3. FM mode

4. BT mode

5. Volume up.

6. Volume down.

7. Short press for previous track/frequency. Under FM, long press for manually search of last station.

8. Short press for next track/lrequency.
   Under FM, long press for manually search of next station.

9. Short press for play/pause; Under FM, long press for automatically search of FM and memory

10. Replay

11. Equalizer.

12. Number button from 0-9 for choosing songs when playing music through SD card or U disk.

For example, to choose song 1, press 1; To choose 12, short press 1 and 2.

Manufactured by Shen Zhen Millonlingdasemiconductor lmited dstriputed by Shenzhen Tecso1 Trade and Technology Ca., Ltd.
Customer service e-mail: Support@sz4ecson.com.

Thank you for purchasing our product LR69Q68. This is a Bluetooth Portable PA Speaker System with microphone for parties, karaoke, and other outdoors and indoors activities. Before you use this product for the first time, please read this manual carefully to get familiar with all its functions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>