Guangzhou Baihui Auto Electronic J10 Keyless Entry Remote Instructions
- June 6, 2024
- Guangzhou Baihui Auto Electronic
Table of Contents
Guangzhou Baihui Auto Electronic J10 Keyless Entry Remote Instructions
Introduction
Thanks for purchasing our product. This an aftermarket key replacement for
your lost or broken key. Its function and appearance are the same as the
original. Please read the instruction clearly before you use the replacement.
Guangzhou Baihui Auto Electronic Co., Ltd. focuses on this line for more than
10 years. The product could be divided into three parts, key fob, brake light,
and Antenna.
Our ambition is to provide a perfect auto part replacement for users who enjoy
driving. The store offers simple, practical solutions to replace your lost or
broken parts.
General Description —Color: BlackProduct type: Auto part Manufacture & Brand:
315MHz Product name: Keyless entry remote Caution: Some key fob could be
programmed without the original key but some must be with the original.
PROGRAMMING
If you have one programmed flip key or key and you want to add a key to the
system use the following instructions.
-
Insert the original, already programmed key in the ignition and turn to the key to the ON/RUN position.
-
Turn the key to LOCK/OFF, and remove the key.
-
Insert the new key to be programmed and turn it to the ON/RUN position
within five seconds. The security light will turn off once the key has been programmed. -
Repeat Steps 1 thru 3 if additional keys are to be programmed Programming with a Recognized Transmitter To program a new key.
- Some of the key fobs could be programmed by following the step-by-step instruction. But some must be cut and programmed by a qualified locksmith or dealer.
- If you have no idea about the compatibility between your vehicle and key replacement, you could search for instructions on http://[www.programyourremote.com](http://www.programyourremote.com) or search on YouTube.
- If it still does not work after self-programmed, please turn to a local locksmith or dealer for technical help.
- Avoid severe impact. The key fob is designed to withstand impact under normal use even if it is made of good quality material. It is not recommended to subject it to severe impact or rough usage.
- satisfaction using experience —
All of our key fobs contain electronics components (some uncut keys contained), you have no need to prepare electronics or batteries. If there is any problem without the key fob, just contact Guangzhou Baihui Auto Electronic Co., Ltd. and send a message to us by Amazon.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>