WYZE WSTH1 Smartwatch User Guide
- June 6, 2024
- Wyze
Table of Contents
QUICK START GUIDE
WELCOME TO WYZE
Small but extremely smart, our Wyze Climate Sensors will be able to detect the
temperature and humidity in any indoor environment. It’s a fantastic addition
to your smart home collection, allowing you to set notifications and rules for
passive and active environmental control.
IN THE BOX
Wyze Climate Sensor x 3
CR2032 Battery x 3
Quick Start Guide x 1
ACTIVATION
To use Wyze Sense Climate Sensor, you will first need to have set up your Wyze Sense Hub (sold separately).
SETUP
-
Download the Wyze app and sign in or create an account.
|
---|--- -
To add your device to a previously installed system, open the Wyze app and tap the + sign on the top left corner of the Home tab. Tap Add Device > Sensors > Wyze Climate Sensor. Follow the instructions in the Wyze app to complete installation and setup.
-
If you haven’t already set up your Wyze Sense Hub, navigate to the Wyze app and go into the Home Monitoring tab. When you’re Home
The monitoring license is activated, you can tap on the Start Setup button. This will guide you through the installation process. Not seeing this screen? Go to http://services.wyze.com to activate our subscription. -
Remove the plastic battery tab. Then press and hold the reset button on the side until the status light on the top of the climate sensor starts flashing.
-
In the Wyze app, name your sensor when prompted. I) (Optional) If you choose to use the adhesive on the back of your climate sensor, please clean the desired mounting location & wait for it to completely dry.
-
Place your climate sensor in your desired location.
SPECIFICATIONS:
Model: WSTH1
Dimensions: 36 mm x 36 mm x 13 mm
Battery: CR2032
Battery Life:1.5 years based on normal usage
Mounting Method: Adhesive Backing Range: 500ft
Operation Temperature: 32°F-104°F (0°C-40°C)
Operation Humidity: 5 85% at 86°F (30°C)
Weather Resistance: Indoor-use only
FCC WARNING:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1)This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator & your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
ISED RADIATION EXPOSURE STATEMENT:
This equipment complies with ISED RF radiation exposure limits set forth for
an uncontrolled environment. This
the transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and operated
with a minimum distance of 20 cm between the radiator & your body.
ISED RSS WARNING:
This device complies with ISED licence-exempt RSS standard (s). Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
https://support.wyzecam.com/hc/en-us
Scan the QR code to learn more
NEED HELP?
Contact our support team:
https://wyze.com/support
Join our Community:
https://wyze.com/community
User Manual Version:1.0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>