GRACE GU10 Smart Bulb Instruction Manual

June 6, 2024
GRACE

GU10 Smart Bulb
Instruction Manual

FEATURES

Wi-Fi & Bluetooth connection
Voice control
Timer & Schedule
Grouping
Dimmable
No Hub required
Remote control
Sync Music

PARAMETERS

COLOR INPUT VOLTAGE Current(mA) Base Power(W)
C/W AC120V
60Hz 65 GU10 5

CCT
RGBW
RGB+CCT

WIRING DIAGRAM

DOWNLOAD APP

  1. Search “Tuya Smart” from the App Store or Google Play.

  2. Scan the QR code from the label or user manual.

https://smartapp.tuya.com/tuyasmart

The APP is compatible with Android 4.4 and IOS9.0 and the higher versions.

LOG IN / REGISTER ACCOUNT NUMBER

Open the Tuya Smart APP, sign up for a new account, or log in with an existing account.

DEVICE PAIRING-EASY IN

  1. Turn on the Smart Bulb and enter the home of the APP while ensuring Bluetooth is on and the WIFI signal is good and stable.

  2. Smart Bulb will flash when turn on the power supply. Stay at the home page and found the push notification, then click ”Go to add”.

  3. Select the Wi-Fi connection to the smart device, input the Wi-Fi password, and then click “Next” to wait for the matching to succeed.
    (Make sure smart devices share the same Wi-Fi.) (Note: If the lamp is not blinking rapidly, please turn off the lamp, and then switch it following the steps:
    ON-OFF-ON-OFF-ON until it’s blinking rapidly.)

  4. The interface of connecting will appear, when the device is found, the lamp will stop blinking, and then initializing device will be complete.
    The Smart Bulb is added once they are communicating on the same Wi-Fi network. You can rename the smart device by clicking on the pencil icon.
    Press the “Done” button at the bottom of the screen to continue to the next step.

CONTROL DEVICE

After the device is connected successfully. The device name of the smart lamp shows in the list. Tap it to enter the control panel of the Smart Bulb.

White Mode
Adjust brightness and color temperature of white light.

Color Mode
Adjust color, brightness, a saturation of colorful light.

Scene Mode
Adjust brightness and color temperature of white light.
Timer
This will switch OFF the Smart Bulb in a specific duration of time.

Schedule
This will keep the Smart Bulb in ON/OFF position for a specific duration of time.

Grouping
If you got two or more lights, please tap “…” at the upper right corner of the control panel and create a group. The smart lamp group will realize synchronous switch, color changes, scene mode selection, timer, etc.

Music Mode
You can minimize the Tramsmart App to play music from any source. Your Smart Bulb will automatically synchronize and change color to the music.

Biorhythm

Change the color temperature of the lights adjusts naturally to keep your body in its natural rhythm.
Light has a big effect on our circadian rhythm and our regular lighting interferes with your circadian rhythm causing health problems.
Our Smart bulbs can be programmed to give you the correct amount of light at the correct color temperature to work in harmony with our circadian rhythm instead of against it.

Sleep plan

  1. Click “More”.
  2. Click “Plan”.
  3. You can select plan type “Sleep plan”.
  4. First, configure the hours (left).
  5. Next, configure minutes (right).
  6. You can customize the repetition time.
  7. Click “Save” to save the settings.

Wake plan

  1. Click “More”.
  2. Click “Plan”.
  3. You can select plan type “Wake up plan”.
  4. First, configure the hours (left).
  5. Next, configure minutes (right).
  6. You can customize the repetition time.
  7. Click “Save” to save the settings.

APP FUNCTION INTRODUCTION

Click the interface to control it according to the specific model of the specific Smart Bulb. The following is a public function introduction.

Remote control: The Smart Bulb can be controlled anywhere after the smart device is successfully connected.
Timer function: Set the timer to turn ON and turn OFF the Smart Bulb.
Intelligent scene: The system sets a variety of intelligent scenes, and different scenes correspond to different lighting atmospheres.
Group: Group control is available(only for the same type of product). Family room management.
Device Sharing: The device is shared with other user control devices in the home.

THIRD-PARTY CONTROL

In the Tuya Smart APP: Find more services in the “Me” menu, click to enter “voice service” (Alexa/ Google Assistant) and other services, click on the service you need.
Connect to the third-party service device according to the operation guide.

For any product and APP updating, please contact customer service.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

ISED Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals