Pacific Sun PowerPlug EU version – Smart Power Switch for Cloud app User Manual

June 6, 2024
Pacific Sun

Pacific Sun logo

Pacific Sun PowerPlug EU version – Smart Power Switch for Cloud app

Pacific Sun PowerPlug EU version - Smart Power Switch for Cloud app
image

Introduction

Dear Customer,
Thank you for purchasing the Pacific Sun Power Plug.
With the purchase of this device, you have selected a top quality product. It has been specifically designed for aquaristic purposes and has been tested by experts. With this device, you are able to control and monitor power for your aquarium devices plugged into this Power Plug.
For best results, please read through this instruction manual before installing the Power Plug on your system.
During or after installation, please do not hesitate to contact our technical support team at service@pacific-sun.eu if you have any questions about your new Power Plug.

Power Plug Information and Features

Device Features

Power Plug is a manageable (wireless controlled) power socket. You can use it to control any devices: lamps, heaters, skimmers based on set parameters.One of the use cases can be for example:

  • when the temperature in the aquarium rises above the allowable – can turn on the aquarium cooler.
  • in cooperation with an optical sensor (connected to Kore 5th/7th) – can protect the skimmer against overflow.

The Power module can coexist with other Pacific Sun devices added to the PS Cloud ecosystem. In the case of setting “Rules” – when Kore 7th works with the kHLab module (depending on the set water hardness) it can turn ON or OFF the Calcium Reactor effluent dosing (control pump which is dosing aquarium water to the Calcium Reactor).
Power Plug is equipped with a module measuring the current and voltage consumed by the connected device.
You can also use it to control the correct operation of the devices (clogged circulation pump, skimmer pump, etc.).
Power Plug is easily and transparently managed via the application (accessible from any browser – including e.g.: SMART TVs).
This device has a built-in scheduler allowing to program ON/OFF functions for each day of the week such as controlling an algae reactor.

Technical Specifications

  • Input voltage: 100-240V
  • Maximum rated current: 10A (2300W)

Power Plug – Smart Power Switch

Pacific Sun PowerPlug EU version - Smart Power Switch for Cloud app
fig1

Adding Power Plug to Pacific Sun Cloud

STEP1
Connect to your home Wi-Fi Internet network, open Internet Browser, and go to the following address:https://cloud.pacific-sun.eu

1 Click Create an account
Note:
If you already have PS account and Added a new tank – skip this step and go to step nr 6Pacific Sun PowerPlug EU version - Smart Power Switch for Cloud app
fig3 STEP2
Create Cloud Pacific Sun account.

  1. Enter Email address
  2. Enter Password
  3. Enter Password Again
  4. Next Click SubmitPacific Sun PowerPlug EU version - Smart Power Switch for Cloud app fig4

STEP3
After login, on the Dashboards:

1 Click Add new tankPacific Sun PowerPlug EU version - Smart Power Switch
for Cloud app fig5 STEP4
Add a Tank:
Type in your preferred Name

1 Click Add tankPacific Sun PowerPlug EU version - Smart Power Switch for
Cloud app fig6 STEP5
Under your tank Name:

1 Click Add DevicePacific Sun PowerPlug EU version - Smart Power Switch for
Cloud app fig7 STEP6
Type In your preferred Name and select the device from the list: Pacific Sun Power Module

1 Click Add DevicePacific Sun PowerPlug EU version - Smart Power Switch for
Cloud app fig8 STEP7
Under your Power Module Name Note you ID device number:

1 ID: ####Pacific Sun PowerPlug EU version - Smart Power Switch for Cloud
app fig9 STEP8
Connect Power Plug to the power outlet.
Find your Power Plug on your Wi-Fi network list devices.
Click Connect directly to the PacificSun Power Plug_Module Wi-Fi Network.Pacific Sun PowerPlug EU version - Smart Power Switch for Cloud app
fig10 STEP9
New window Pacific Sun Power Module will automatically Pop Up:|
Click:
1 Scan for wifi networksPacific Sun PowerPlug EU version - Smart Power
Switch for Cloud app fig11 STEP10
Connect Power Module to your Home WiFi network:
1 Select your Home WiFi network under the Network list.Pacific Sun PowerPlug
EU version - Smart Power Switch for Cloud app fig12 STEP11
Connect Power Module to Home WiFi network and PS Cloud:Pacific Sun PowerPlug
EU version - Smart Power Switch for Cloud app fig13

  1. Your Home WiFi network
  2. Type in your Home WiFi network password
  3. Type in your Cloud Username
  4. Type in your Cloud Username password
  5. Type in your Cloud Device ID XXXX from step 7
  6. Next Click: Save

STEP12
Now, under your PS Cloud user interface, you should see an active Power Plug device:

  1. Last online
  2. You can test the device by clicking the Power ON/OFF buttonPacific Sun PowerPlug EU version - Smart Power Switch for Cloud app fig14

If you need technical support – please contact with service@pacific- sun.eu
Copyright:
Pacific Sun Sp. Z o.o.
ul. Ogrodników 22
84-240 Reda
Poland
tel. + 48 58 778 17 17 email: office@pacific-sun.eu

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals