TOMADO TVC0501W Stick Vacuum Cleaner Instruction Manual
- June 6, 2024
- TOMADO
Table of Contents
TOMADO TVC0501W Stick Vacuum Cleaner Instruction Manual
SAFETY INSTRUCTIONS
- First carefully read the instruction manual in full prior to using the appliance and store the manual in a safe place for future reference.
- Only use this appliance for the purposes described in the instruction manual.
- This appliance is only suitable for household use.
- The appliance may be used by children of 8 years and older and persons with a limited physical, sensory or mental capacity or lack of experience or knowledge, provided they use the appliance under supervision or have been instructed about its safe use and understand the hazards involved.
- Children must not play with the appliance.
- The appliance may not be cleaned or maintained by children younger than 8 years of age, unless this is done under supervision.
- Keep the appliance and cable out of reach of children younger than 8 years of age.
- Strict supervision is required if the appliance is used by or near children.
- Keep hands, feet, loose-fitting clothes, hair and animals out of reach of the rotating brush. This is to prevent injury to skin, eyes or ears, for example.
- Do not use the appliance outdoors or on a wet surface and do not use it for picking up moisture.
- Do not pick up lightly flammable materials.
- Do not pick up burning materials such as cigarettes, matches or ash.
- Always make sure the appliance is placed on an even, flat surface and is only used indoors.
- Only use the original charger provided with the appliance for charging the battery. The technical details can be found on the information plate of the appliance.
- When the appliance is being charged, it must be in the off position.
- Do not charge the battery at temperatures above 37°C or below 0°C.
- Static electricity: some types of floor covering can be statically charged. A discharge of static electricity is not dangerous.
- Do not use the appliance for cleaning animals or people.
- This appliance is intended for household and similar use, such as: – in staff kitchens, shops, offices and other work environments;
- by guests of hotels, motels and other residential environments;
- in Bed&Breakfast type environments;
- farms.
- Caution: the appliance may not be used with an external timer or a separate remote control.
- Only connect the appliance to alternate current, to a wall socket, with a mains voltage that corresponds with the information provided on the information plate of the appliance.
- Never bend the power cord sharply or allow it to run across hot parts.
- Do not use the appliance if the charger, cord or appliance are damaged, or if the appliance no longer functions properly or if it is damaged in any other way. In that case, consult the shop or our customer service. Never replace the charger’s plug or cord yourself.
- The use of accessories not recommended or sold by Tomado may cause fire, electrical shocks or injuries.
- The brush and vacuum cleaner were specially designed for use on carpets and hard floors. In rare cases, and depending on the type of floor, it is possible that scratches are made in the surface to be cleaned. Tomado is not responsible for any damage made on the floor.
- If the appliance is not being used or if parts or accessories must be assembled or disassembled, or when cleaning the appliance, fully switch off the appliance.
- Do not leave the appliance unsupervised if the appliance is operational.
- Never place the appliance near appliances that give off heat, such as ovens, gas cookers, hotplates, etc.
- If the appliance is not used as intended or if the instructions in the manual are not observed, no compensation can be claimed in case of defects or accidents and the warranty will be invalidated.
- Correct installation and maintenance of the motor filter and dust reservoir in accordance with the instructions in the manual is necessary to prevent defects in the appliance. In case of defects caused by incorrect use or not placing the dust reservoir and filters, the warranty becomes invalid.
- Never submerge the appliance, charger, cable or plug in water.
- Make sure that children are unable to touch the cable or appliance.
- Do not allow the cable to run over sharp edges, hot components or other sources of heat.
- Do not pull the cord and/or appliance to remove the plug from the wall socket. Never touch the charger with wet or damp hands.
- If you decide to cease using the appliance due to a defect, we recommend cutting off the cord of the charger after removing the plug from the wall socket.
PRODUCT DESCRIPTION
- On/off switch
- Connection for the adapter
- Motor casing
- Dust reservoir with filter
- Stick
- Knob for disconnecting the turbo brush
- Turbo brush with LED lighting
- Knob for disconnecting the stick
- Knob for disconnecting the dust reservoir
- Crack nozzle
- Combination furniture nozzle
- Adapter
- Suspension bracket
PRIOR TO FIRST USE
Follow these instructions when using the vacuum cleaner for the first time: Carefully remove the vacuum cleaner and all accessories from the packaging and remove all packaging material. Keep the packaging (plastic bags and cardboard) out of reach of children. After unpacking the appliance, carefully check it for external damage that may have occurred during transport. Place the vacuum cleaner on a sturdy, dry and flat surface. Prior to using the vacuum cleaner for the very first time, charge the battery for at least 5 hours on the adapter.
ASSEMBLY
MOUNTING AND REMOVING THE TURBO BRUSH
Hold the connection of the turbo brush in line with the connection of the stick and connect both parts in such a way that they snap in place.
Press the knob on the tube to disconnect the turbo brush – fig. 1.
MOUNTING AND REMOVING THE STICK
Hold the connection of the stick in line with the connection of the vacuum cleaner and connect both parts in such a way that they snap in place – fig. 2. Press the knob to disconnect the vacuum cleaner again.
CHARGING THE VACUUM CLEANER
Insert the connector of the adapter into the connection on the side of the vacuum cleaner – fig. 3.
Insert the adapter into the socket. Once the adapter is connected to a socket, the vacuum cleaner is being charged.
The indicator lighting switches on and turns blue LED by LED.
If the battery of the vacuum cleaner is totally empty, charging takes approximately 5 hours.
When the battery is fully charged, all LEDs light up blue continuously. In order to save power, the indicator lighting switches off after 3 to 5 minutes, once the vacuum cleaner is fully charged.
Always remove the adapter from the socket once the battery is fully charged. It is normal for the adapter to become warm when it is connected to the socket.
TIPS
- A fully charged battery has a usage time of approx. 40 minutes in normal mode and approx. 20 minutes in turbo mode.
- We recommend fully using up the battery at least once per month and then fully charging it. This is beneficial to the battery’s life span.
Warning!
- Never connect the appliance to the adapter with wet or damp hands.
- Do not make contact with the rotating brush of the turbo brush when the vacuum cleaner is on.
- Only use the originally provided charger to charge the vacuum cleaner. Other chargers could damage the appliance and can even be dangerous.
USE
SWITCHING THE VACUUM CLEANER ON AND OFF
Slide the on/off button on the handle to the first position to switch on the vacuum cleaner. The vacuum cleaner will function in normal mode. Slide the on/off button to the next position to activate the turbo mode.
Fully slide back the on/off button to switch off the vacuum cleaner.
The turbo brush starts to rotate automatically when the vacuum cleaner is switched on. The turbo brush has been provided with LED lighting.
USING THE VACUUM CLEANER AS A HANDHELD VACUUM CLEANER
The vacuum cleaner can also be used as a handheld vacuum cleaner, in order to clean furniture or car seats for instance.
Remove the stick – fig. 4 and place one of the accessories on the nozzle of the vacuum cleaner.
The handheld vacuum cleaner can be used with the turbo brush, crack nozzle or combination brush nozzle Slide the on/off button on the handle to the first position to switch on the vacuum cleaner. The vacuum cleaner will function in normal mode. Slide the on/off button to the next position to activate the turbo mode.
Fully slide back the on/off button to switch off the vacuum cleaner.
The combination brush nozzle can be used in two ways: with or without a brush.
After each use, place the vacuum cleaner back on the suspension bracket. Once the adapter is connected and the connector is inserted into the connection of the vacuum cleaner, the battery will charge. Once the battery is fully charged, remove the adapter from the socket and the appliance.
MAINTENANCE
Regularly check the filters to prevent problems. Empty the dust reservoir when it is full and clean or replace the filters when they are dirty.
EMPTYING THE DUST RESERVOIR
It is recommended emptying the dust reservoir after each use. The dust reservoir is full when the amount of dirt has reached the max line. Remove the accessories prior to emptying the dust reservoir – fig. 4.
- Hold the vacuum cleaner above a waste bin and remove the cover from the dust reservoir – fig. 5.
- The cover falls open – fig. 6. Gently shake the dust reservoir empty into the waste bin and close the cover in such a way that it snaps in place.
CLEANING THE CYCLONE SYSTEM AND FILTERS
First remove the accessories and empty the dust reservoir before cleaning the vacuum cleaner – fig. 4. Clean the filters and cyclone system after each 4th time that the dust reservoir is emptied.
-
Press the knob to disconnect the dust reservoir and remove the dust reservoir from the vacuum cleaner – fig. 7.
-
The entire dust reservoir comes away from the vacuum cleaner – fig. 8 and 9. Make sure you hold the dust reservoir upright to prevent the filter and cyclone system from falling out.
-
Remove the filter and cyclone system from the dust reservoir.
-
Clean the filter and cyclone system with lukewarm running water and allow the components to dry in the air. Do not use cleaning agents or brushes. It is possible that the filter does not return to its original colour after cleaning. This discolouration does not have an effect on its function.
-
The cyclone system consists of two parts. In order to clean the cyclone system thoroughly, you can dismantle the cyclone system. Unscrew the bottom side with the inner filter. Clean the parts with lukewarm running water. Do not use cleaning agents or brushes. Allow the parts to dry in the air.
-
Re-assemble all parts when everything is fully dry and place them back in the dust reservoir in reverse order.
Caution: the cyclone system fits in the dust reservoir in only one way. -
Properly connect the dust reservoir to the vacuum cleaner and make sure it snaps in place.
Attention
- Only use the vacuum cleaner when all filters have been placed. If not, the suction power could be reduced or the motor could be damaged.
- Torn or not properly sealing filters could damage the motor. When a filter is defective, it must be replaced by a new original filter.
CLEANING THE TURBO BRUSH
Hair and/or other dirt can remain in the rotating brush. Therefore, regularly clean the turbo brush for an optimum use of the vacuum cleaner.
- Make sure the vacuum cleaner is off and disconnect the turbo brush from the vacuum cleaner.
- Unlock the catch at the bottom of the turbo brush with a coin or flat screwdriver – fig. 10.
- Fold out the catch – fig. 11.
- Now carefully pull the brush out of the turbo brush – fig. 12.
- Carefully cut the entangled threads or hairs from the brush.
- Clean the brush with lukewarm running water and allow the brush to dry in the air.
- Place the brush back in the turbo brush.
- Fold in the catch and rotate it to the locked position with a coin or flat screwdriver.
STORAGE
After each use, place the vacuum cleaner back on the suspension bracket. Once the adapter is connected and the connector is inserted into the connection of the vacuum cleaner, the battery will charge. Once the battery is fully charged, remove the adapter from the socket and the appliance.
ATTACHING THE SUSPENSION BRACKET
Use screws and plugs to attach the suspension bracket to the wall on a location near a socket for the adapter.
- Hold the suspension bracket with the round below against the wall at the required position.
- Demarcate the two screw holes on the wall using a pencil.
- Use a drill to make two holes of at least 4 cm deep on the marks.
- Insert the plugs in the holes.
- Place the suspension bracket on the wall and fasten it with the screws
RECYCLING
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU).
Observe the rules that apply in your country for the separated collection of electric and electronic products.
Correct disposal of the product prevents negative consequences for the environment and for public health.
The packaging material of this product can be recycled 100%, return packaging material separately
ORDERING ACCESSORIES
Go to www.tomado.com/support to purchase accessories or spare parts.
WARRANTY CONDITIONS
A 24 month warranty is provided for this product. Your warranty is valid if the product has been used in accordance with the user instructions and for the purpose for which it was made. Also the original proof of purchase must be submitted, stating the date of purchase, the name of the retailer and the item number of the product. For extensive warranty information you are referred to our website: www.tomado.com/support
Tomado Electric Appliances
Postbus 159
6920 AD Duiven
The Netherlands
support@tomado.com
www.tomado.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>