OTTO D54223B Freestanding Refrigerator Instruction Manual
- June 6, 2024
- OTTO
Table of Contents
OTTO D54223B Freestanding Refrigerator
TOOLS REQUIRED
DIMENSIONS
The
back wall of the wooden cabinet must be left open completely to kitchen wall
in order to allow sufficient air circulation to cool down the condenser unit
for energy efficiency.
Adjusting the legs
If your refrigerator is unbalanced:
You can balance your refrigerator by turning the legs of it as illustrated in
the figure. The corner where the leg exists is lowered when you turn in the
direction of black arrow and raised when you turn in the opposite direction.
Taking help from someone to slightly lift the refrigerator will facilitate
this process.
If the subject parts are not included in the product you have purchased, then
it is valid for other models (see page 4). 
Note: Installation step for
2, screws for connecting top plastic part should not be screwed very hard,
because of moving the plastic part easily left or right side. Installation
step for 4* – only for Italy models
INSTALLATION STEPS
CAUTION:
CAUTION 
