BaByliss PRO BABNTMC1 Nano Titanium MiraCurl Professional Curl Machine Instruction Manual

BaByliss PRO BABNT3070TN Professional Straightener

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING

KEEP AWAY FROM WATER
DANGER – Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

1. Always unplug the appliance immediately after using.
2. Do not use it while bathing or in the shower.
3. Do not place or store appliances where it can fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or any other liquid.
5. If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:

1. This appliance should never be left unattended when plugged in.
2. Do not pull, twist, or wrap line cord around appliance.
3. This appliance should not be used by, on, or near children or individuals with certain disabilities.
4. Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer. Do not use an extension cord to operate appliance.
5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any opening.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
10. Do not use an extension cord with this appliance.
11. This appliance is hot when in use. Do not let heated surfaces touch eyes or skin.
12. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair and the like.
13. Do not place the appliance on any surface while it is operating.
14. Do not touch hot surfaces of the appliance; use handles or knobs.

OPERATING INSTRUCTIONS

This appliance is intended for professional use. Use on Alternating Current (60 Hz) only. Standard appliances are designed to operate at 120 volts AC.
This appliance has a polarized plug (one blade is wider than the other.) As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

NANO TITANIUM
Your Nano Titanium™ MiraCurl® has many benefits. Nano titanium is an exceptional conductor of heat and is stable in ultra-high temperatures. The Nano Titanium technology utilizes microparticles of titanium and ceramic, providing the ultimate benefits for beautiful, healthy-looking hair. Nano titanium yields maximum far-infrared heat, penetrating the hair from within for gentle styling without damaging hair. Nano titanium emits natural ions for faster stying, locking in hair’s own natural moisture. This Nano Titanium™ iron will give your hair a smooth, silky shine while eliminating frizz.

BaBylissPRO™ MiraCurl®
Effortlessly create long-lasting beautiful curls, with BaBylissPRO™ MiraCurl®. Hair is automatically drawn into the Nano Titanium curl chamber where it is softly held and heated from all directions to effortlessly form the curl. Then, simply release. The result is beautiful, free-flowing curls.

FEATURES

• Nano Titanium curl chamber for smooth curl creation
• 3 timer settings with audio beep indicator for different curl effects
• 3 heat settings; 375°F, 410°F and 450°F for long-lasting results
• Powerful heating system ready to use in seconds with ultra-fast heat recovery
• Curl direction control for either a uniform or natural finish (Right/Left/Alternate)
• Suitable for shorter and longer hair lengths
• On/Off switch with ON indicator light
• Heat ready indicator
• Auto shutoff
• Sleep mode
• Motion sensor
• 8 ft. 360° swivel cord

GET TO KNOW YOUR PROFESSIONAL STYLER

Model BABNTMC1

OPERATING INSTRUCTIONS
The MiraCurl® will create many different curl effects in the hair. It is easy to experiment with the different settings to achieve your desired results.
Always ensure that the sections of hair you want to curl are no wider than 1 inch wide. The type of curl will depend on the temperature selected and the timer setting, which dictates the amount of time the hair is kept inside the curl chamber.

TEMPERATURE SETTINGS
There are 3 temperature settings to select from 375°F, 410°F and 450°F. We recommend you always start with the lowest temperature setting and increase the level of heat as required.

• Setting I (375°F) – for delicate, fine or colored hair
• Setting II (410°F) – for normal textured hair
• Setting III (450°F) – for thick or wavy hair

TIME SETTINGS
There are 3 time settings with an automatic beep indicator. These different settings will give different curl effects. The longer the hair is held inside the curl chamber, the more defined the curl will be. But results will also vary according to hair type. Use the following as a guide:

• Setting 8 (8 seconds = 3 beeps) – for loose waves
• Setting 10 (10 seconds = 4 beeps) – for soft curls
• Setting 12 (12 seconds = 5 beeps) – for more defined curls
• At the end, there will be 4 quick beeps in succession to indicate time is up, and it’s ready to release hair.

AUDIO OFF SETTING
You can turn off the automatic beep indicator if it is not required by sliding the timer switch to 0.
NOTE: When the 0 setting is selected, there will be no beep indicator to advise when to release the styler. Take extra care when using this setting.

CURL DIRECTION SETTING (Right/Left/Alternate)

• Use the curl direction control to choose either a uniform or natural finish. Select the curl direction by sliding the switch to either left (L) or right (R) or alternate (A).
• (L) starts the curl to to the left, counterclockwise.
• (R) starts the curl to the right, clockwise.
• You can also select the opposite direction on each side to create a symmetrical look. When styling the left side of the hair, slide the curl direction switch to the left position (L). When styling the right side of the hair, slide the switch to the right position (R).This ensures that the curl sits toward the face on both sides of the head and will give a more uniform style. For a more natural look, select the alternate setting (A). This will alternate the direction after each curl.

INSTRUCTIONS FOR USE

• Ensure hair is dry and combed through.
• Plug the styler into a 120V outlet.
• Slide the temperature switch to the required heat setting.
• The styler is ready for use when the ON indicator light has stopped flashing.
• There are 3 time settings; choose the optimum setting for your hair type. Alternatively, switch the time setting to 0.
• Select the curl direction by sliding the control to either position L, R or A.
• Separate a section of hair that is no wider than 1 inch (Figure A). Ensure that the section is clean, dry and combed through.
• Please note the styler must be positioned into the hair with the opening of the curl chamber facing toward the head (Figure B).
• Position the styler where you want the curl to start. The hair section must be straight, and placed neatly through the center of the styler (Figures C and D).
• Once the hair is in place, let go of the hair section and close the handle to allow the hair to be automatically taken into the curl chamber (Figure E).

NOTE: If you continue to hold the hair section after closing the handle the MiraCurl® will stop and beep to indicate that you must release the tension on the hair. If you have taken too much hair, or hair is not neatly going through the center of the appliance, the MiraCurl® will again stop and beep to indicate a problem. This safety feature ensures there will be no tangles.

• The hair is automatically drawn into the ceramic curl chamber where it is softly held and heated from all directions to effortlessly form the curl.
• If you are using the timer setting, the automatic beep indicator will start as soon as the handles are closed together. There will be a series of individual beeps. Hold the styler still, with the handles held together until the end of the individual beeps. There will then be four quick beeps in succession. This indicates that the time is up and you can remove the styler from the hair. NOTE: When the audio off 0 setting is selected, there will be no beep indicator. There will just be a warning beep at 15 seconds.
• It is very important that you release the handles fully, and then gently pull the styler away from the head to free the hair and reveal the curl (Figure F).

NOTE: Always release the handles first to set the curl free; if you pull away before you open the handles, the curl will be straightened out.

• To allow the curl to set, do not comb or brush the hair until it cools.
• Repeat around the head until you have the amount of curls desired.

SMART TECH®
MiraCurl® comes with 3 functions for added safety and energy savings.

• Auto Shut Off: If the appliance is switched on for more than 60 minutes continuously, it will automatically switch off. If you wish to continue using the appliance, simply slide the switch to off position and then slide the switch to the relevant setting to turn the power on.
• Sleep Mode: After 20 minutes of idle time, the temperature drops to around 300°F/150°C.
• Motion Sensor: Move the iron and close it to trigger the reheat to set temperature.

USER MAINTENANCE

The appliance may require cleaning due to a buildup of residue from hair products.

• Ensure the unit is switched off, unplugged and cool.
• Using a damp cloth and mild detergent or soap, wipe the appliance.
• Ensure the unit has dried thoroughly before re-using.

CAUTION
NEVER allow the power supply cord to be pulled or twisted. Never wrap the cord around the unit. Damage will occur at the high flex point of entry into the unit, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.

CLEANING & MAINTENANCE 
It is very important that you use the cleaning tool included with your iron to regularly clean the curl chamber. This will prevent a buildup of product to ensure the curls produced are always perfectly formed.

• Ensure the appliance is switched off, unplugged and cool.
• Lightly dampen the cleaning tool with warm water and mild detergent or soap.
• Insert the tool fully into the curl chamber cavity as per the diagrams below.
• Rotate the tool around the curl chamber to remove any buildup of product.
• Ensure the appliance has dried thoroughly before re-using.
• The cleaning tool can be used numerous times; just remove the felt pads, rinse them in warm, soapy water and let dry before using again.

STORAGE

When not in use, your appliance is easy to store. Allow unit to cool, then simply put back in the box, and store out of reach of children in safe, dry location. Do not jerk or strain cord at plug connections.

NOTICE
THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF-THE-ART TECHNOLOGY ALLOWS THE HEATER TO REACH THE OPERATING TEMPERATURE IN LESS THAN ONE MINUTE.
DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL BURN OUT IF POWER IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL BE VOIDED. TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.

WARNING:
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.
KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination, but did you know that an electrical appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES.

LIMITED FOUR YEAR WARRANTY

BabylissPro will repair or replace (at our option) your unit free of charge for 48 months from the date of purchase if the appliance is defective in any workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed below, together with your purchase receipt and $5.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-326-6247 for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 48 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 48-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL BABYLISSPRO BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limi tation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

SERVICE CENTER
BabylissPro
Service Department
7475 North Glen Harbor Blvd. Glendale, AZ 85307

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>