BaByliss PRO BABNT2071N Nano Titanium U Styler Instructions
- June 6, 2024
- BaByliss PRO
Table of Contents
BaByliss PRO BABNT2071N Nano Titanium U Styler Instructions
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following
READ ALL INSTRUCTIONS BEFORE USING. KEEP AWAY FROM WATER.
DANGER – Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:
- Always unplug appliance immediately after using.
- Do not use while bathing or in the shower.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in, or drop into, water or other liquid.
- If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:
- This appliance should never be left unattended when plugged in.
- Do not pull, twist, or wrap line cord around appliance.
- This appliance should not be used by, on, or near children or individuals with certain disabilities.
- Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer. Do not use an extension cord to operate appliance.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
- Keep the cord away from heated surfaces.
- Never use while sleeping.
- Never drop or insert any object into any opening.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord with this appliance.
- This appliance is hot when in use. Do not let heated surfaces touch eyes or skin.
- Do not place the appliance on any surface while it is operating.
- Do not touch hot surfaces of the appliance; use handles or knobs.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
This appliance is intended for professional use. Use on Alternating Current (60 Hz) only. Standard appliances are designed to operate at 120 volts AC.
This appliance has a polarized plug (one blade is wider than the other.) As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
Nano Titanium
Your Nano Titanium™ U Styler has many benefits. Nano Titanium™ is an
exceptional conductor of heat and is stable in ultra-high temperatures. The
Nano Titanium™ plates combine the technology of micro particles of titanium,
providing the ultimate heat performance for beautiful, healthy hair. Nano
Titanium™ yields maximum far infrared heat, penetrating the hair from within
for gentle straightening without damaging hair Nano titanium emits negative
ions for faster straightening, locking in hair’s own natural moisture. This
Nano Titanium™ iron will give your hair a smooth, silky shine while
eliminating frizz.
SOL-GEL TECHNOLOGY
The Sol-Gel technique is a delicate, precisely controlled lab process that
transforms nanoscale particles of titanium and ceramic from a liquid (SOL) to
a solid (GEL) form, resulting in a much higher concentration of titanium and
ceramic. The titanium ceramic coating is 37% harder (longer lasting and chip
resistant), less porous (chemically resistant) and 22% smoother (reduces
friction and helps preserve the integrity of the hair).
STRAIGHTENING BASICS
- Plug the iron into a standard electrical outlet (120V).
- Slide the temperature switch to the desired setting (use the chart below as a reference). The corresponding LED light will light up/blink.
Note: The indicator light will stop blinking when the unit reaches the selected temperature. The iron will heat up very quickly. It is not necessary to touch the plates to judge readiness.
LED| Type of Hair| Temp
---|---|---
Green| Delicate, thin hair| 340°F
Orange| Average hair| 400°F
Red| Thick or wavy hair| 450°F - Section dry hair evenly, and comb each section. Position the iron on hair as far up as you want hair to be straightened, being careful not to let the iron touch the scalp. Close the iron with the hair between the two plates and gently pull the iron down to the end of the section of hair you are straightening. Repeat this process several times if necessary. Allow hair to cool before combing.
- Turn off and unplug the appliance.
- Allow to cool before storing.
TO CREATE CURLS
For your convenience, the U Curler offers various options for creating beautiful curls:
Technique 1
-
Separate a section of hair, no more than 1½” wide. The smaller the section, the more defined the curl. The larger the section, the looser the curl or wave.
-
Place section of hair between the plates, making sure the side heating plates are facing towards the head. Close the plates
-
Turn the unit 90° so that the side heating plates are facing upwards.
-
It is important that the hair is held firmly between the plates. For extra control, hold the rubberized cool tips
-
Gently pull the iron down to the end of the section of hair in an outward curved motion so that by the time the unit reaches the ends of the hair, the side heating plates are facing down.
-
Release the hair.
-
To ensure the curl sits neatly in place, grab the end of the section you have just curled and twist it 180° in the direction of the curl.
Technique 2
-
Separate a section of hair, and place it between the plates, making sure the side heating plates are facing towards the head. Close the plates.
-
Turn the unit 90° so that the side heating plates are facing downwards.
-
Gently pull the iron down to the end of the section of hair in an inward curved motion so that by the time the unit reaches the ends of the hair, the side heating plates are facing up.
-
Release the hair.
-
To ensure the curl sits neatly in place, grab the end of the section you have just curled and twist it 180° in the direction of the curl.
Technique 3
-
Separate a section of hair, and place the end between the plates. Close the plates.
-
Rotate the iron in the desired direction and wrap hair around housing.
-
Release hair.
GET TO KNOW YOUR PROFESSIONAL STYLER
USER MAINTENANCE
Your iron is virtually maintenance-free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, let it cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be pulled or twisted. Never wrap the cord
around the unit. Damage will occur at the high flex point of entry into the
unit, causing it to rupture and short. Inspect the cord frequently for damage.
Stop use immediately if damage is visible or if unit stops or operates
intermittently.
STORAGE
When not in use, your appliance is easy to store. Allow unit to cool, then
simply put back in the box, and store out of reach of children in safe, dry
location. Do not jerk or strain cord at plug connections.
NOTICE THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF- THE-ART TECHNOLOGY ALLOWS THE HEATER TO REACH THE OPERATING TEMPERATURE IN LESS THAN ONE MINUTE. DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL BURN OUT IF POWER IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL BE VOIDED. TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.
WARNING: IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination, but did you know that an electrical appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES.
LIMITED FOUR YEAR WARRANTY
BABYLISSPRO WILL REPAIR OR REPLACE (AT OUR OPTION) YOUR UNIT FREE OF CHARGE
FOR 48 MONTHS FROM THE DATE OF PURCHASE IF THE APPLIANCE IS DEFECTIVE IN ANY WORKMAN SHIP OR MATERIALS.
TO OBTAIN SERVICE UNDER THIS WARRANTY, RETURN THE DEFECTIVE PRODUCT TO THE SERVICE CENTER LISTED ON BACK, TOGETHER WITH YOUR PURCHASE RECEIPT AND $5.00 FOR POSTAGE AND HANDLING. CALIFORNIA RESIDENTS NEED ONLY PROVIDE PROOF OF PURCHASE AND SHOULD CALL 1-800-326-6247 FOR SHIPPING INSTRUCTIONS. IN THE ABSENCE OF A PURCHASE RECEIPT, THE WARRANTY PERIOD SHALL BE 48 MONTHS FROM THE DATE OF MANUFACTURE.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 48-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. IN NO EVENT SHALL BABYLISSPRO BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL, INCIDENTAL, OR CONSE QUENTIAL DAMAGES, SO THE ABOVE LIMI TATION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
SERVICE CENTER
BABYLISSPRO
SERVICE DEPARTMENT
7475 NORTH GLEN HARBOR BLVD.
GLENDALE, AZ 85307
©2015 BabylissPro
7475 North Glen Harbor Blvd.
Glendale, AZ 85307
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>