KREAFUNK 60862 aCOUSTIC Premium Bluetooth Speaker User Manual
- June 6, 2024
- KREAFUNK
Table of Contents
SAFETY AND MAINTENANCE INSTRUCTIONS
- Please read this operation manual carefully before use.
- The safety and maintenance instructions in this operation manual should be retained for future reference and must be followed at all times.
- Keep the product away from heat sources such as radiators, heaters or other appliances that produce heat.
- Do not expose the product to direct sunlight for longer periods. High temperatures will shorten the life of the product, destroy the battery and distort certain plastic parts.
- Do not expose the product to extreme cold as it may damage the internal circuit board.
- Avoid liquids getting into the product.
- Do not throw with or stamp on the product. This may damage the internal circuit board.
- Do not try to disassemble the product. This must only be done by a professional.
- Do not use concentrated chemical products or detergent to clean the product.
- Keep the surface away from sharp things, as these may cause damage to the plastic parts.
- Use 5V / 1A power supplies only. The connection of power supplies with higher voltage may lead to severe damage.
- Do not arbitrarily discard or place the lithium battery near fire or intense heat in order to avoid a risk of explosion.
If you do experience any problems with your product please contact the retailer you purchased the product from. The retailer will provide you with guidance and if that does not solve the problem the retailer will handle the claim directly with KREAFUNK.
Overview
CONNECT & PLAY
Press the multifunction button (K) to turn aCOUSTIC on. The LED indicator will light up white and a sound prompt is heard.
When the LED indicator on aCOUSTIC starts flashing white, make sure Bluetooth on your device is turned on. Find the list of visible/ connected units on your device and select “aCOUSTIC”. The LED indicator will turn solid white, a sound prompt is heard and aCOUSTIC is ready to play.
MANUAL BLUETOOTH® PAIRING MODE
aCOUSTIC will always re-connect to last connected device, when turned on. If you wish to connect a new device, you can manually activate Bluetooth® pairing mode: Press and hold the multifunction button (K) to activate Bluetooth pairing mode. The LED indicator will flash white and you can now pair aCOUSTIC with a new device.
MULTI-FUNCTIONS
VOICE ASSISTANT FUNCTION
You can use your device’s Voice Assistant through the built-in microphone on aCOUSTIC. Activate your Voice Assistant by triple-pressing the Play button. The LED indicator will flash white and the built-in microphone will pick up your voice commands. When having two aCOUSTICs playing in TWS mode, only one aCOUSTIC can activate the microphone for Voice Assistant. When activating your Voice Assistant, the LED indicator will flash white on the speaker that listens to your commands.
BATTERY AND CHARGING
CHARGING
Charging time is approximately 5 hours using the included USB cable. The LED
indicator turns solid orange when charging. The LED indicator turns solid
green when the battery is fully charged.
WIRELESS CHARGING
aCOUSTIC can be charged via the USB-C input or by being placed on a QI®
certified wireless charging pad. When aCOUSTIC is charging correctly, the LED
indicator will turn solid orange. When the battery is fully charged, the LED
indicator will turn solid green until aCOUSTIC is removed from the QI®
certified charging pad or the charging cable is unplugged. Charging time on a
QI® certified charging pad is approximately 8 hours.
BATTERY STATUS
When the battery level is below 15%, the LED indicator turns solid red. When the battery level is below 10%, the LED indicator flashes red. aCOUSTIC will automatically switch off when not in use for 60 minutes.
TRUE WIRELESS STEREO PAIRING
aCOUSTIC can pair with another aCOUSTIC and play in True Wireless Stereo (TWS). Turn on both aCOUSTICs. Press and hold the multifunction button (K) on the primary speaker for 2 seconds. Then press the (+) button to activate TWS pairing mode. Press and hold the multifunction button on the secondary speaker to connect in TWS. The LED indicator on the primary speaker now flashes purple.
The two aCOUSTICs will automatically pair, the LED indicator will turn solid white on both speakers and a sound prompt will be heard.
Make sure your device is paired to the primary speaker. You are now ready to play in True Wireless Stereo. The two aCOUSTICs will automatically reconnect in TWS mode when both speakers are turned on, until TWS pairing mode is manually activated again on one of the speakers.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>