ACONIC HG1 Shower Speaker for Iphone and Smartphone Instructions
- June 6, 2024
- ACONIC
Table of Contents
ACONIC HG1 Shower Speaker for Iphone and Smartphone Instructions
Product Overview
Features
- Bluetooth handsfree audio
- Connection with all Bluetooth enabled devices (mobile phones, tablets, etc.)
- Built-in rechargeable lithium battery 400mAh
- USB power cable
- Ideal for travelling, easy installation, excellent sound quality
- Use in the shower, by the pool (not in) etc, in the rain
Keys
Pairing Your Device
Activate the Bluetooth speaker pairing mode by turning it off. Then, Press and hold the power button for 6 seconds until the red LED and blue LED lights are flashing alternative. Now the speaker is ready for pairing.
- Turn on your device and activate Bluetooth function.
- Search for Bluetooth devices. Select Aconic AWS20.
- If prompted! enter password or PIN No:”0000″. Now the Shower Speaker wit be connected to your device.
Note: Please make sure the speakers’ power is off when trying to activate the pairing mode.
Charging
The Aconic Shower Speaker is powered by an integrated rechargeable lithium battery. Charge as follows:
- Insert the charging cable into the DC5V socket on the unit. Connect the USB plug into a PC or AC/DC adaptor. When the battery is charging the LED indicator turns red
- When the indicator LED light goes out, the speaker is fully charged
Safety Instructions
- Keep the device away from heat, direct sunlight and sharp edges
- Do not insert any metal object into the device. As this is a risk of short circuit
- To avoid static charge, do not us in a extremely dry climate.
- Do not repair the unit yourself. Contact an authorized specialist
- Do not charge in the shower or other wet environments
- Only charge when unit is dry
- Do not submerge under water
Technical Specification
Bluetooth Support Range 33 feet
Transmitting Frequency 2.4G Hz
Power Supply DC5v /1 00-120mA
Battery 3. 7V 400MAH lithium battery
Charging Time Approx. 3 hours
Operating Time Approx. 3 hours
IP Grade IPx4
Unit Weight Approx. 3. 5 oz
FCC Statement
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE: Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help. FCC
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the
radiator& your body.
We’re here to help. If you have any issues with this product, please
contact us at: [email protected]
Telephone: 718-747-8886
© Aconic. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.