ACONIC AC-CSSP-CL LED Shower Speaker User Manual
- June 9, 2024
- ACONIC
Table of Contents
ACONIC AC-CSSP-CL LED Shower Speaker
LED SHOWER SPEAKER
FOR IPHONE, SMARTPHONES AND OTHER BLUETOOTH MEDIA DEVICES
Included:
- Aconic Shower Speaker
- USB Charging
- Cable & Manual
Product Overview
Features
- Bluetooth handsfree audio
- RGB LED light
- Connection with all Bluetooth enabled devices (mobile phones, tablets, etc.)
- Built-in rechargeable lithium battery 400mAh
- USB power cable
- Ideal for travelling, easy installation, excellent sound quality
- Use in the shower, by the pool (not in) etc, in the small rain
Keys
-
Forward/Volume –
Press once to go back to last song, hold down to decrease volume. -
Rewind/Volume +
Press once to move on to next song, hold down to increase volume.. Press to hang up phone calls. Press twice to redial last call -
Power
Press to turn on or off speaker. Press the key once to play or pause music. Double click to control the RGB light. Press to pick up popes calls.
Pairing Your Device
Activate the Bluetooth speaker pairing mode by turning it off. Then, press and hold the power button for 6 seconds until the blue LED light is flashing alternative. Now the speaker is ready for pairing.
- Turn on your device and activate Bluetooth function.
- Search for Bluetooth devices. Select ACCHANDELIER.
- If prompted, enter password or PIN No:“0000”. Now the Shower Speaker will be connected to your device.
Note: Please make sure the speakers’ power is off when trying to activate the pairing mode.
Charging
The Aconic Shower Speaker is powered by an integrated rechargeable lithium battery.
Charge as follows:
- Insert the charging cable into the DC5V socket on the unit. Connect the USB plug into a PC or AC/DC adaptor. When the battery is charging the LED indicator turns red
- When the indicator LED light goes out, the speaker is fully charged
Safety Instruction
- Keep the device away from heat, direct sunlight and sharp edges
- Do not insert any metal object into the device. As this is a risk of short circuit
- To avoid static charge, do not use in a extremely dry climate.
- Do not repair the unit yourself. Contact an authorized specialist
- Do not charge in the shower or other wet environments
- Only charge when unit is dry
- Do not submerge under water
Technical Specification
- Bluetooth Support BR+EDR
- Range 33 feet Transmitting
- Frequency 2.4G Hz
- Power Supply DC 5V/ 140-180mAh
- Battery 3.7V 400MAH Ilithium battery
- Charging Time Approx. 2-3 hours
- Operating Time ApprOx. 2-3 hours
- IP Grade IPx4
- Unit Weight Approx. 3.5 oz
We’re here to help.
If you have any issues with this product, please contact us at:
cs@aconicproducts.com
Telephone: 718-747-8886 Aconic.
All rights reserved.
Trademarks and registered trademarks are the property of their respective
owners.
FCC Caution
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>