ACONIC AC-AWS20-SD16 Shower Speaker User Manual
- June 9, 2024
- ACONIC
Table of Contents
ACONIC AC-AWS20-SD16 Shower Speaker
Product Information
The product has two features – BDR and EDR. The device complies with part 15 of the FCC rules, which means that it meets the requirements for radio frequency emissions and interference. The user’s authority to operate the equipment may be void if they do not comply with the FCC rules.
Product Usage Instructions
- Ensure that the device is being operated according to the FCC rules.
- Use the BDR feature to connect the device with other Bluetooth devices for data transfer.
- Use the EDR feature to establish a faster Bluetooth connection for streaming high-quality audio and video.
- If the device is causing harmful interference, discontinue use and contact customer support.
- If the device is receiving interference that may cause undesired operation, try moving the device to a different location or contacting customer support for assistance.
Included: Aconic Shower Speaker, USB Charging Cable & Manual
Product Overview
Features
- Bluetooth handsfree audio
- Connection with all Bluetooth-enabled devices (mobile phones, tablets, etc.)
- Built-in rechargeable lithium battery 400mAh
- USB power cable
- Ideal for traveling, easy installation, excellent sound quality
- Use in the shower, by the pool (not in), etc, in the rain
Keys
Pairing Your Device
- Activate the Bluetooth speaker pairing mode by turning it off. Then,
- Press and hold the power button for 6 seconds until the red LED and blue LED lights are flashing alternative. Now the speaker is ready for pairing.
- Turn on your device and activate Bluetooth function.
- Search for Bluetooth devices. Select Aconic AWS20.
- If prompted, enter password or PIN No:”0000″. Now the Shower Speaker will be connected to your device.
Note: Please make sure the speakers’ power is off when trying to activate the pairing mode.
Charging
- The Aconic Shower Speaker is powered by an integrated rechargeable lithium battery. Charge as follows:
- Insert the charging cable into the DC5V socket on the unit.
- Connect the USB plug into a PC or AC/DC adaptor. When the battery is charging the LED indicator turns red
- When the indicator LED light goes out, the speaker is fully charged
Safety Instructions
- Keep the device away from heat, direct sunlight and sharp edges
- Do not insert any metal object into the device. As this is a risk of short circuit
- To avoid static charge, do not us in a extremely dry climate.
- Do not repair the unit yourself. Contact an authorized specialist
- Do not charge in the shower or other wet environments
- Only charge when unit is dry
- Do not submerge under water
Technical Specification
- Bluetooth Support BDR, EDR
- Range 33 feet
- Transmitting Frequency 2.4G Hz
- Power Supply DC5v/100~120mA
- Battery 3.7V 400MAH lithium battery
- Charging Time Approx. 3 hours
- Operating Time Approx. 3 hours
- IP Grade IPx4
- Unit Weight Approx. 3.5 oz
FCC
Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>