BESSEY Mitre Clamping System MCX Instruction Manual
- June 9, 2024
- BESSEY
Table of Contents
Mitre clamping system MCX
Instructions for use
Practical accessory for BESSEY screw clamps TG,GZ, GMZ, EHZ, EZS, DUO and EZL / EZXL
Mitre Clamping System MCX
-
Insert adapter 22.5° (A), 30° (B1), 60° (B2) or 45° (C) into basic unit.
-
Press the clamping jaws onto the workpiece using the stepless adjustment device and tighten them using the set screws.
IMPORTANT: Adapters must be symmetrical to each other. -
By rotating the handle of the clamp, the clamping jaws move in the direction of the arrow until the desired clamping pressure is reached.
NOTE: recommended clamping width of the screw clamp 300 mm.
BESSEY Tool GmbH & Co. KG Mühlwiesenstraße 40 74321 Bietigheim-Bissingen,
Germany
Fon +49 7142 401- 0 Fax: +49 7142 401- 452 E-Mail:
info@bessey.de www.bessey.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>