Blackstar POLAR 2 FET Input Audio Interface Owner’s Manual

POLAR 2 FET Input Audio Interface

“`html

Specifications:

• 2 channels of studio-quality preamps

• FET instrument inputs for ultra-low noise and high
  headroom

• Enhance switch to emulate valve amplifier input stage

• Meticulously engineered microphone preamps

• Compatibility: macOS 10.15 and later, Windows 8 and later

Product Usage Instructions:

Getting Started:

Make sure you have all the components included in the box:

• POLAR 2 audio interface
• Quick Start Guide
• USB-A to USB-C Cable
• USB-A to DC Cable
• Safety Information Sheet

System Requirements:

The POLAR 2 Audio Interface is compatible with macOS 10.15 and
later, and Windows 8 and later. Ensure your system meets these
requirements before use.

Software System Requirements:

The POLAR Control software is compatible with macOS 10.14 and
later, and Windows 8 and later.

Overview – POLAR CONTROL:

The POLAR CONTROL software allows you to have complete control
of your monitor mix and more. Familiarize yourself with the layout
and functions for optimal usage.

Overview – POLAR 2 Hardware:

Understand the inputs, gain settings, LED meters,
line/instrument switch, enhance switch, monitor level control,
headphone level control, balanced outputs, power input, and USB-C
connection for effective operation.

Connectivity:

Connect your instruments, microphones, and line-level devices to
the appropriate inputs on the POLAR 2 audio interface. Ensure
proper connections for optimal performance.

FAQ:

Q: What are the default file directories for POLAR Control

Preset Files?

A: The POLAR Control Preset Files are saved to
“~/Documents/Blackstar/Polar/Sessions” on macOS and
“~/AppData/Roaming/Blackstar/Polar/Sessions” on Windows by
default.

“`

Designed and Engineered by Blackstar Amplification UK

Owners’ Manual – ENGLISH

Contents Page

Introduction

Our mission is to design the ultimate tools for self-expression for guitarists. In the 17 years since Blackstar was founded in Northampton, England, we have launched countless award-winning products that inspire guitarists around the globe.
After extensive research, development, and testing, we present POLAR 2, the audio interface designed for the recording guitarist. POLAR enhances your guitar DI signal to replicate the feel and response of playing through a real valve amplifier. POLAR is the ultimate audio interface solution that empowers guitarists and artists alike to unlock their fullest sonic potential with:

n 2 channels of studio-quality preamps to capture the full richness and detail of your vocals and instruments
n FET instrument inputs for ultra-low noise and high headroom, creating an excellent sonic foundation for your guitar tone
n The proprietary Enhance switch, adding a unique circuit that emulates the input stage of valve amplifiers, enriching the sound of all guitar amp plugins
n Instrument inputs that completely prevent digital clipping, allowing you to drive the input like the preamp stage of a valve amp
n Meticulously engineered microphone preamps, with vintage mic preamp tone that adds warmth and lifts vocal performances
n The power to start recording now, right out of the box with the included bundle of studio software
n POLAR Control software, offering complete control of your monitor mix and more
n iOS capability, allowing you to stream and record on the go

2

Contents

Introduction

2

Contents

3

Getting Started

4

In the Box

4

System Requirements

4

Software System Requirements

4

Getting Started

4

Overview – POLAR CONTROL

5

Overview – POLAR 2 Hardware

6

Panels ­ A Closer Look

7

Inputs

7

Setting Input Preamp Gain

7

Input and Output LED Meters

7

+48V ­ Phantom Power

8

Line/Instrument Switch

8

Enhance Switch

8

Monitor Level Control

9

Headphone Level Control and Output 10

Balanced Outputs

10

DC 5V Power Input

10

USB-C

10

DAW Setup Ableton Live Logic Pro X Pro Tools Cubase FL Studio Studio One
Connectivity Instrument and Microphone Line Level Devices
POLAR CONTROL – Layout
POLAR CONTROL – Details Channels Direct Input Monitor Level Fader dB Value Box Level Meter Pan Control Mute / Solo Buttons Stereo Link Sample Rate Preset Box and Save Button Output Mix Section

11

POLAR CONTROL – Examples

19

11

11

POLAR CONTROL – Signal Flow

21

11

12

iOS

22

12

Lightning to USB Camera Adapter

22

12

Lightning to USB 3 Camera Adapter

23

Operation

23

13

13

Specifications

24

14

15

16 16 16 16 17 17 17 17 17 18 18 18

3

Contents Page
Getting Started
In the Box n POLAR 2 n Quick Start Guide n USB-A to USB-C Cable n USB-A to DC Cable n Safety Information Sheet
System Requirements The POLAR 2 Audio Interface is compatible with:
n macOS 10.15 and later n Windows 8 and later
Software System Requirements POLAR Control software is compatible with:
n macOS 10.14 and later n Windows 8 and later
File Directories POLAR Control Preset Files are by default saved to the following directories:
n macOS ~/Documents/Blackstar/Polar/Sessions
n Windows ~/AppData/Roaming/Blackstar/Polar/Sessions

Getting Started For information on downloading software, installation, and the included studio software collection please visit: www.blackstar.com/polar2/go
4

Contents Page
Overview ­ POLAR Control
Blackstar’s POLAR Control software, included with every POLAR interface, offers professional-level mixing and routing for Windows and Mac. Developed by expert audio engineers, it emulates traditional studio mixers for complete control and customization. Streamline your workflow with quick adjustments and versatile routing seamlessly alongside your DAW–all within an intuitive, user- friendly interface. For more details on POLAR Control, see page 15
5

Contents Page
Overview ­ POLAR 2 Hardware

6 5
7 4
8 3
9 2
11 1
10

13

14

12

15

1. Inputs 1 & 2: Connect your instrument, microphone, and line level devices here.
2. +48V Switch: Switch on to power condenser microphones, or other devices requiring phantom power.
3. Input Gain Controls: Adjusts the input gain to set the desired level for each channel.

4. Line/Instrument Switch: Toggle between line-level and instrumentlevel input signals for each channel, when connected to the input using a XLR cable, the LINE/INST switch is disabled.
5. Enhance Switch: Switch on to engage a unique circuit that emulates the input stage of a real valve amplifier on the instrument input; or to add a gentle high shelf EQ that brings out clarity on vocals.
6. Power LED: Lights white when the interface is powered. 7. LED Input Meters: Shows the preamp gain levels for each input,
with peak hold functionality. 8. LED Output Meters: Shows the output levels being sent to the
Balanced Outputs on the rear panel and Headphone output, with peak hold functionality. 9. Monitor Level Control: Adjusts the output level of the balanced outputs on the rear panel (1/L & 2/R) 10. Headphone Output Jack: Connect your headphones here using a stereo 6.35mm (1/4″) jack connected. 11. Headphone Level Control: Controls the level sent to the headphones output. 12. Balanced Outputs: Connect to studio monitor speakers. We recommend using 1/4″ TRS jack cables for balanced connections. 13. Kensington Lock: use a lock to secure the device and deter theft. 14. DC 5V Power Input: an optional way to supply power to your Polar 2 15. USB-C: Connect your Polar 2 to your computer using the supplied USB-A to USB-C cable. Most computers will power your Polar 2 using this port only (bus power).
TIP: The Enhance Switch works in one of two ways, depending on what source is connected to the input.
To add the feel and response of real valve amps, make sure you’re connected to the input using a ¼” jack cable, and that INST is selected for that input.
To add clarity and presence to vocals and more, make sure you’re connected to the input using an XLR cable. Connecting an XLR cable will disable the LINE/INST switch.
6

Contents Page

Panels ­ A Closer Look

This section will take an in-depth look at all the functions and features available on your Polar 2 hardware.

Inputs

Polar 2 features two Combi jack inputs that accept unbalanced mono (TS) ¼”, balanced Mono (TRS) ¼”, and XLR jack cables.

Connecting an XLR cable here disables the LINE/INST switch.

Setting Input Preamp Gain

The input preamp level is the level of the signal entering your audio interface, which is the same signal that will be sent to your computer/device and DAW (Digital Audio Workstation).

Properly setting preamp input gain level ensures optimal recording quality, without introducing unwanted digital clipping or noise. If you set the level too low you’ll likely end up boosting it afterwards, which could result in hearing more noise on your recording. If the signal is too high, you can introduce digital clipping, which sounds like harsh distortion.

To increase the input gain, turn the Input Gain Control clockwise.

As you adjust the input gain, while sending signal to your

input, you can use the LED Input Meters on the top panel,

the input meters on Polar Control (pg. 17), or the meters in

GAIN

your DAW to visually monitor your input level.

Input and Output LED Meters

I2 OV -3 -6 -12 -18 -24
INPUTS

I2 OV -3 -6 -12 -18 -24
OUTPUTS

Polar 2 features peak hold LED metering, a feature that professional audio engineers and musicians use to monitor and control audio signal levels more effectively.
Peak hold metering is a type of level metering that temporarily “holds” the peak level of an audio signal on the meter, allowing you to see the highest signal level reached over a short period. This helps in identifying and adjusting levels to prevent clipping and distortion.

Polar 2’s LED meters show signal level in dBFS (Decibels relative to full scale) in the following increments:

n LED 1 (White): -24 dB n LED 2 (White): -18 dB n LED 3 (White): -12 dB n LED 4 (White): -6 dB n LED 5 (Orange): -3 dB n LED 6 (Red): OV (at 0dBFS or over)

When the signal has reached the indicated level, the corresponding LED will light.

TIP: When setting input level, we recommend aiming for a signal that peaks around -12dB to -6dB. This allows enough headroom to prevent clipping without sacrificing sing-to-noise ratio.

7

Contents Page

Panels ­ A Closer Look (cont’d)

+48V ­ Phantom Power

OFF +48V
ON

48V, often called “Phantom Power”, is a standard feature that supplies power from your interface through an XLR cable to certain devices that require this extra power to work. Most of the time this will be used for condenser microphones, but can also be needed for inline microphone preamps, active dynamic microphones, or active DI boxes.

1. Turn Off +48V: Ensure that phantom power is off before connecting an XLR to prevent any potential damage.
2. Turn Down Gain: Turn down the Input Gain Control to avoid loud click or pop noises.
3. Connect the Microphone: Plug in your condenser microphone, or other device that requires phantom power, into the XLR input on your Polar 2.
4. Turn On +48V: Once connected, turn on the phantom power switch. 5. Set your level: Now you’re ready to increase and set your gain. You
will see incoming level on the Input LED Meters on the top panel.

Always turn off phantom power before connecting or disconnecting an XLR cable to avoid loud pops that could damage speakers or headphones.

IMPORTANT: Most modern dynamic and ribbon microphones will not be damaged if you accidentally have +48V on. However, some vintage ribbon microphones might be. When in doubt, it’s always best to check the microphone’s documentation to confirm.

Line/Instrument Switch

The LINE/INST switch only affects the corresponding

input’s signal coming in via the ¼” part of the Combi jack

LINE

INST

Input. When an XLR is connected, the LINE/INST switch is

bypassed

When LINE is selected, the input is setup to be suitable for line-level devices such as keyboard and studio outboard equipment.

When INST is selected, the input is setup to be more suitable for instrument level devices such as an electric guitar or bass.

Enhance Switch

ENHANCE

OFF

ON

The Enhance Switch works in one of two ways depending on what you have connected to the input, and whether you have INST selected on your Polar 2 interface.

1. 1/4″ Instrument jack cable connected, INST selected:

Both instrument input sections on your Polar 2 feature a harmonically rich FET input stage, providing you the best sonic foundation for your guitar tone.

As experts in the field of valve amp design and topologies, our team of engineers, developers, and guitar players have created a first-of-its-kind Enhance Switch to instantly improve the touch, feel, and response of your guitar
DI signal.

When you switch on Enhance on the instrument input, it engages a unique circuit that’s been meticulously designed to mimic the input stage of real valve amplifiers–including all its non-linear behaviours and characteristics.

8

Contents Page

Panels ­ A Closer Look (cont’d)

Immediately hear the tone of your guitar slightly bloom and come alive, making any guitar amp plugin sound like you’re playing through a real amp!
Another feature that makes Polar 2’s Enhance switch ground-breaking for recording guitars directly is that it completely prevents digital clipping, no matter how much input gain you add. This special circuit allows you to drive Polar’s inputs like a valve amp’s preamp section.
2. XLR Cable Connected

Monitor Level Control
The large monitor control allows you to adjust the output level sent to the Balanced Outputs on the rear panel, typically connected to your studio monitors.
Turn the knob clockwise to increase the volume and counter-clockwise to decrease the volume.

When an XLR cable is connected, the LINE/INST switch is disabled, and the Polar 2 enables its studio quality microphone preamps.

INPUTS

MONITOR

OUTPUTS

Switching on Enhance on the microphone preamps adds a gentle high shelf EQ to the signal.
Dialled in by Blackstar’s very own staff who have decades of experience in professional audio engineering and production, this high shelf EQ subtly lifts the top end to bring out just the right amount of air and clarity from vocal performances, even acoustic guitars, and more.
NOTE: If you have a ¼” jack cable connected to the input and LINE selected, the Enhance switch will be disabled.
If you notice the Enhance switch isn’t adding the enhanced effect on your guitar signal, make sure you’ve selected INST.

NOTE: The Output LED Meters are pre-fader, meaning they will show the dBFS level of the signal coming from your computer even if the Monitor Level Control is turned all the way down.
TIP: For the most resolution over your output level control, try setting up your studio monitor level in this order:
1. Turn the volume on your studio monitors all the way down. 2. Turn the Monitor Control Knob up to about 3 o’clock. 3. Playback your audio and gradually turn up the volume of your studio monitors until
the level is at the loudest that you need.
Now you have detailed control over the full range of your output level needs, while leaving some room for a bit more passed 3 o’clock when necessary.

9

Contents Page
Panels ­ A Closer Look (cont’d)

Headphone Level Control and Output

HEADPHONES

Polar’s headphone output is designed to drive both low and high impedance headphones, providing clear and accurate monitoring.

The Headphone Output Jack is a ¼” stereo jack.

The dedicated Headphone Level Control allows you to adjust the headphone level independently from your monitors.

If your headphones only have a 3.5mm connector, you can use a stereo 3.5mm to stereo 6.35mm (1/4″) adapter to connect to Polar’s headphone output.

Using headphones with a TS or TRRS connector (such as headphones with a microphone or volume control built into the cable) will most likely not work. We always recommend using headphones with a stereo connector and/or stereo adapter.

Balanced Outputs

OUTPUTS

1/L

2/R

Outputs 1/L and 2/R are line-level outputs
designed to connect your Polar 2 to active
monitors or an amplifier. These outputs use balanced 1/4″ TRS jacks and can accommodate both unbalanced TS and balanced TRS jack cables.

The Monitor Level Control on the top panel of your Polar 2 adjusts the output level for Outputs 1/L and 2/R.

DC 5V Power Input
Most computers will have no issues supplying power to your Polar 2 over USB, however, if you are using additional peripherals or high-power devices alongside your Polar 2, the computer’s USB port may not supply enough power.
You’ll usually know when this happens if the Polar 2 keeps disconnecting during intense usage, for example, playing headphones at a loud
D C 5 V 1 A level and powering two condenser microphones with phantom power.
For these cases, the DC 5V Power Input allows you to power your Polar Audio Interface using DC 5V power. Use the included USB to 5V cable to connect your adapter to any standard DC 5V power adapter.
NOTE: When using iOS devices, you must power your Polar 2 with DC 5V. For more details, see the iOS section on page 22.

USB-C
USB-C

The USB-C connection on the Polar Audio Interface is used to connect the interface to your computer. This connection facilitates power supply, data transfer, and communication to the Polar Control software.

Use the included USB-A to USB-C cable to connect directly to an open USB-C port on your computer.

IMPORTANT: Avoid connecting your Polar 2 to your computer using a USB hub, as this will cause issues and is not supported.

10

Contents Page
DAW Setup
Digital Audio Workstation (DAW) is a software application used for recording, editing, mixing, and producing audio.
Polar is compatible with any DAW that supports ASIO on Windows and any DAW that supports Core Audio on macOS.
TIP: If you don’t already have a DAW installed on your computer, you can get started quickly with the included Ableton Live Lite software that comes with your Polar 2.
This rest of this section will cover how to set up your Polar 2 to start recording with the most popularly used DAWs, including:
n Ableton Live n Logic Pro X n Pro Tools n Cubase n FL Studio n Studio One
Before following each guide, make sure you’ve connected your Polar 2 to your computer using the USB-C connection, ensuring that the interface is powered on and properly connected.
Ableton Live
1. Setup: n Open Ableton Live and go to Preferences (usually found under the Live menu on Mac or Options menu on Windows). n Select the Audio tab. n Under Audio Input Device, choose the Polar Audio Interface. n Under Audio Output Device, select the Polar Audio Interface. n Adjust the buffer size and sample rate as needed for your project.

2. Recording Audio: n Create a new audio track in Ableton Live. n Select the input channel corresponding to the connected instrument or microphone. n Arm the track for recording by clicking the record button on the track. n Press the main record button in Ableton Live to start recording. USB-C port on your computer.
Logic Pro X
1. Setup: n Open Logic Pro X and go to Preferences > Audio. n Under the Devices tab, set Output Device and Input Device to the Polar Audio Interface. n Adjust the buffer size and sample rate as needed for your project.
2. Recording Audio: n Create a new audio track in Logic Pro X. n Select the appropriate input channel for your connected instrument or microphone. n Arm the track for recording by clicking the R button on the track. n Press the main record button in Logic Pro X to start recording.
Pro Tools
1. Setup: n Open Pro Tools and go to Setup > Playback Engine. n Select the Polar Audio Interface as the Playback Engine. n Go to Setup > I/O and configure the inputs and outputs as needed.

11

Contents Page
DAW Setup
2. Recording Audio: n Create a new audio track in Pro Tools. n Select the appropriate input channel for your connected instrument or microphone. n Arm the track for recording by clicking the record enable button on the track. n Press the main record button in Pro Tools to start recording.
Cubase
1. Setup: n Open Cubase and go to Studio > Studio Setup. n Select VST Audio System and choose the Polar Audio Interface as the ASIO driver. n Go to Studio

Audio Connections and set up the input and output busses.
2. Recording Audio: n Create a new audio track in Cubase. n Select the appropriate input channel for your connected instrument or microphone. n Arm the track for recording by clicking the record enable button on the track. n Press the main record button in Cubase to start recording.
FL Studio
1. Setup: n Open FL Studio and go to Options > Audio Settings. n Select the Polar Audio Interface as the audio device. n Adjust the buffer size and sample rate as needed for your project.

2. Recording Audio: n Select the appropriate input channel in the mixer for your connected instrument or microphone. n Arm the track for recording by clicking the record button in the mixer track. n Press the main record button in FL Studio to start recording.
Studio One
1. Setup: n Open Studio One and go to Studio One > Options (Windows) or Preferences (Mac). n Select Audio Setup and choose the Polar Audio Interface as the audio device. n Adjust the buffer size and sample rate as needed for your project.
2. Recording Audio: n Create a new audio track in Studio One. n Select the appropriate input channel for your connected instrument or microphone. n Arm the track for recording by clicking the record enable button on the track. n Press the main record button in Studio One to start recording.

12

Contents Page

Connectivity

Polar 2 supports connections for a wide range of audio equipment. This diagram illustrates a typical setup and how to make each connection.

Powered Speakers
44

1

2

PC/Mac
5
3

Instrument and Microphone
1. Connect your guitar, bass, or other instruments to Input 1 using a standard 1/4″ instrument cable. Make sure you select INST on the LINE/INST switch. Enable the Enhance switch to optimize the signal with valve amp inspired circuitry.
2. Connect your microphone to Input 2 using an XLR cable. If you’re using a microphone that requires phantom power (most condenser microphones) make sure to enable the +48V phantom power switch.
3. Plug your headphones into the headphone output. If your headphone only has a 3.5mm jack, you’ll need to use a 3.5mm to stereo 6.35mm (1/4″) adapter. Use the headphone volume control to adjust the listening level.
4. Connect your studio monitors to the balanced outputs. Plug you left monitor to 1/L and your right monitor to 2/R. We recommend using TRS cables.
5. Connect the Polar 2 to your computer using a USB-C cable. This connection handles both power and data transfer.

Guitar

Microphone

Headphones

13

Contents Page
Connectivity (cont’d)

Line Level Devices For line-level devices like keyboards and drum machines, use the combo jack inputs on Channels 1 and 2 with 1/4″ TRS or TS cables. Make sure you select LINE on the LINE/INST switch. For devices with stereo outputs (like some keyboards), you can connect the left output to Input 1, and the right output to Input 2.
NOTE: When LINE is selected, the Enhance switch is bypassed for ¼” TRS and TS inputs.

Pedal Chain Setup
Thanks to the Enhance switch, which mimics the input stage of a valve amp, the Polar 2’s inputs are ideally suited for guitar pedals. This allows you to use your favourite guitar effects pedals during recording to capture their authentic sound.
To use this setup, connect your guitar to the input of your first pedal. Then, connect the output of the last pedal in the chain to Input 1 on Polar 2 using a 1/4″ instrument cable.

14

Contents Page
POLAR CONTROL ­ Layout
Polar Control is the software mixer app for the Polar Audio Interface. Designed to operate like a traditional mixer, it offers you the most flexibility for all of your signal routing needs. For a quick look at how signal is routed on Polar Control, see page 21.

1. Stereo Link: Links two channels together, allowing them to be controlled simultaneously for stereo operation.
2. Channel Name: Indicates the name and function of the channel 3. Mute/Solo Buttons: Allows you to mute or solo a specific channel,
isolating it or silencing it from the mix. 4. dB Value Box: Displays the current decibel level setting of the channel. 5. Level Meter: Shows the audio level for the channel in dBFS 6. Level Fader: Adjusts the volume level of the channel.

7. Pan Control: Pans the audio signal left or right in the stereo field. 8. Direct Input Monitor: Toggles direct monitoring of the input signal,
allowing for latency-free monitoring. 9. Sample Rate: Shows and allows adjustment of Polar 2’s sample rate. 10. Preset Box: Shows the current preset configuration, and allows you to
load/save different presets. 11. Save Button: Saves the current settings as a preset. 12. Output Mix Buttons: Selects and shows the current mix for the
selected Output Mix.
15

Contents Page
POLAR CONTROL ­ Details
The Polar Software App is designed to enhance the functionality of your Polar Audio Interface, providing control over monitoring levels, mixing, and routing. This section will guide you through each feature of the software, explaining how to use them effectively.
Channels
Like most traditional audio mixers, Polar Control has multiple channels, each with their own individual pan control, level fader, level meter, decibel value box, mute, solo, and stereo link button.
The Channel Name indicates the function of each channel, for example, Channel 1, Channel 2, Playback 1L/2R, and Virtual 3/4.
The channel name is automatically assigned based on the input or output configuration and cannot be manually changed.
Direct Input Monitor
Before going into further detail of each channel’s functions, it’s helpful to understand what the Direct Input Monitor button does, and how to use it.
Enabling the Direct Input Monitor button allows you to directly hear the signal coming into Polar’s preamps (Input 1 and 2 on your Polar Interface).
Typically, using software monitoring in your DAW introduces a small amount latency. While usually minimal, this latency becomes more noticeable as your session becomes more demanding (e.g., with many plugins or high track counts), increasing the load on your computer.
With Direct Input Monitor, you can monitor the signal straight from the inputs of your Polar 2 with near-zero latency, which can be crucial for monitoring live vocal performances and more.
Disabling Direct Input Monitor will mute Channel 1 and 2 on Polar Control.

IMPORTANT: When using Direct Input Monitor, you’ll almost always want to disable software monitoring in your DAW. If you’re monitoring live vocals that sound slightly doubled, or if you hear an unintended guitar DI signal, check to make sure you don’t have software monitoring in your DAW and Direct Input Monitor on Polar Control enabled at the same time.
Level Fader Each channel on Polar Control features a Level Fader that adjusts the channel’s volume level. Click and drag, or scroll the fader up or down to increase or decrease the volume. The dB Value Box will reflect your adjustments. Double-clicking the fader snaps the level to -6.0 dB.
IMPORTANT: Fader vs. Preamp Gain: The Level Fader does not control Polar’s preamp control or the preamp’s gain. It only adjusts the monitoring level of the input. The preamp gain can only be set using the Gain Control on your Polar 2 Interface. What This Means: Adjusting the Level Fader will change how loud the signal sounds in your headphones or monitors but will not affect the actual recording level of the input signal.
16

Contents Page
POLAR CONTROL ­ Details (cont’d)

dB Value Box
The dB Value Box displays the current decibel level of the channel. The box updates automatically as you adjust the Level Fader. You can also click inside the box to type in a specific dB value. Values must be typed accurately including the minus “-” sign for value below 0.0 db.
Level Meter
The Level Meter provides a visual representation of the audio signal level for each channel in dBFS (decibels relative to Full Scale).
Like the LED Meters on your Polar 2, Polar Control’s meters move up and down in response to the signal input.
You can use Polar Control’s Level Meters to monitor the preamp level as you adjust the Gain Control on your Polar 2 Interface. For more details, see “Setting Input Preamp Gain” on page 7.
NOTE: The Level Meters on Polar Control display the signal level before it reaches the Level Fader. This is known as “pre-fader metering.” This means that regardless of how you adjust the Level Fader, the Level Meter shows the raw input signal.
Pan Control
The Pan Control allows you to position the audio signal in the stereo field.
Click on the Pan Control and drag either up-and-down, or left-and-right to move the signal towards the left or right speaker/headphone.
You can double-click the Pan Control to return to centre.

Mute / Solo Buttons
The Mute and Solo buttons silence or isolate the audio for each channel.
Mute Button: Click to silence the channel. The button will light up to indicate the channel is muted.
Solo Button: Click to isolate the channel, which will have the effect of muting all other channels. The button will light up to indicate the channel is soloed.
You can Solo and/or Mute multiple channels at once. noticeable as your session becomes more demanding (e.g., with many plugins or high track counts), increasing the load on your computer.
TIP: If you don’t hear audio, but you see signal on Polar Control’s Level Meter, make sure that either: 1. The channel isn’t accidentally Muted. 2. The Level Fader isn’t accidentally all the way down. 3. Other channels aren’t unintentionally Soloed. 4. The correct Output Mix is selected, (see page 18)
Stereo Link
The Stereo Link button allows you to link two channels together for synchronized control, which is useful for stereo recordings and playback.
When enabled, the two adjacent channels will collapse to become one stereo channel, showing one set of Channel controls that affects both channels at the same time.
By default, Polar Control will have Playback 1L/2R and VIRTUAL 3/4 linked as stereo.
17

Contents Page
POLAR CONTROL ­ Details (cont’d)
Sample Rate
The Sample Rate setting controls how many times (samples) per second the audio is captured or played back on your computer. It affects the quality of your recordings. Higher numbers mean better quality and resolution, but also bigger file sizes and processing demand on your computer.
Polar 2 can record and playback at up to 192 kHz.
NOTE: Usually your DAW will determine the sample rate, and changing sample rates in your DAW would automatically update in Polar Control. If you experience issues with playback (e.g., audio glitches or dropouts), verify that the sample rate setting matches across Polar Control and your DAW.
TIP: For most audio production, a sample rate of 44.1 kHz offers plenty of resolution. For video and broadcast, a sample rate of 48kHz is often recommended.
Preset Box and Save Button
The Preset feature in Polar Control lets you save and load mix configurations, allowing for quick switching between different setups to suit your recording or mixing needs.
Clicking the Preset Box opens a dropdown menu where you can Save and Load your custom presets. Loading the Default preset restores the settings to the default factory preset.
You can click the Save Button to quickly save the current mix configuration.

Output Mix Section
Just like a traditional audio mixer, Polar Control lets you combine different audio signals and send them to a main output. This is the core of how Polar Control works, giving you unlimited flexibility to control what you hear in your headphones or speakers, and/or how you route your signals.
Output Mix Buttons: Think of the Output Mix Buttons as different “pages” you can view.
When you select the Output 1 + 2 button, you see the volume (Fader) and balance (Pan) levels for what’s coming out of the Balanced Outputs and Headphones on your Polar 2.
If you select the Virtual 3 + 4 button, you see the levels for a separate mix that can be used for different purposes, like streaming or recording.
You can refer to the signal diagram on page 21 for a visual guide on understanding the complete signal flow within Polar Control.
TIP: If you’re making mix adjustments, but don’t hear the changes, make sure that the correct output mix is selected!

18

Contents Page

POLAR CONTROL ­ Examples

This section outlines a few recording setups that will enhance your experience using the Polar Control software.

1. Recording your own vocals with zero-latency monitoring
   Start with: n Polar 2 connected to your computer n DAW open, with software monitoring off, and Polar 2 selected as your
   audio device n Headphones connected to your Polar 2
   1. Connect your microphone to Input 1 on your Polar interface. If your microphone requires phantom power, switch +48v to On.
   2. On Polar Control, enable Direct Monitor Input. 3. On Polar Control, raise Channel 1’s Fader to -6.0 dB 4. With your headphones on, speak/sing into the microphone while raising the
   Gain control on your Polar 2 to set an appropriate level (to learn about setting levels see page 7) 5. You can use Channel 1’s Fader to adjust the monitoring level of your microphone signal. 6. On your DAW, when you playback audio, by default it will appear on Polar Control on Channel Playback 1L/2R. You can use Playback 1L/2R’s Fader to adjust the level of your DAW playback signal. 7. Using both Faders, you can balance the levels of the DAW and live vocal signal to easily create a comfortable mix.

(2) Recording someone else’s vocals with zero-latency monitoring
Start with: n Polar 2 connected to your computer n DAW open, with software monitoring off, and Polar 2 selected as your
audio device n Headphones connected to your Polar 2
1. Connect a microphone to Input 1 on your Polar interface. If the microphone requires phantom power, switch +48v to On.
2. On Polar Control, enable Direct Monitor Input. 3. On Polar Control, raise Channel 1’s Fader to -6.0 dB 4. With the singer’s headphones on, ask them to speak/sing into the
microphone while raising the Gain control on your Polar 2 to set an appropriate level (to learn about setting levels see page 7) 5. You can use Channel 1’s Fader to adjust the monitoring level of your microphone signal. The singer will now hear their voice. 6. On your DAW, when you playback audio, by default it will appear on Polar Control on Channel Playback 1L/2R. You can use Playback 1L/2R’s Fader to adjust the level of your DAW playback signal. 7. Using both Faders, you can balance the levels of the DAW and live vocal signal to easily create a comfortable mix for the vocalist.

Microphone

PC/Mac
Headphones
19

Contents Page

POLAR CONTROL ­ Examples (cont’d)

This section outlines a few recording setups that will enhance your experience using the Polar Control software.

(3) Loopback

Often called “loopback”, with Polar Control you can route audio from your computer’s output back into your recording software, enabling you to record system audio, streams, or any other audio playing through your computer. This section explains how to set up and use loopback with the Polar Control software.

1. Ensure that Polar is being used for audio output in your computer audio settings. If you have the option, select Output 1/2.
2. In Polar Control software, locate the OUTPUT MIX section. 3. Click on the Virtual 3+4 button to show the mix for that output (for more
info on OUTPUT MIX see page 18). 4. Play audio from your computer. You should see the Level Meter on the
PLAYBACK 1L/2R Channel showing signal from your computer audio. 5. Raise the Fader for PLAYBACK 1L/2R to maximum (0.0dB). This effectively
routes the audio playing on your computer back into the Polar interface. 6. Stop computer audio playback. 7. In your DAW, create a new stereo track, with inputs set to Input 3/4. Mute
this new track in your DAW. 8. Playback your computer audio, you will see the signal appearing in your
DAW on the new track. 9. Press the record button in your DAW to capture the loopback audio.

IMPORTANT: When you’re using Loopback, make sure to mute the channel in your DAW so you don’t cause a feedback loop!

20

Contents Page
POLAR CONTROL ­ Signal Flow Diagram

from POLAR from POLAR

INPUT 1

INPUT 2

from DAW and/or Computer Audio
Output 1/2

from DAW and/or Computer Audio
Output 3/4

OUTPUTS

1/L

2/R

To Monitor & Headphone Outputs on Polar Interface

to DAW Input 3/4 (and/or Computer Audio Input 3/4)

21

Contents Page
iOS
Polar 2 is compatible with most iOS devices, such as iPhone® and iPad®, providing flexibility for mobile recording and production.
To connect to iOS devices, you’ll need some external accessories that are not included with Polar 2.
Required Accessories:
n Apple® Lightning to USB Camera Adapter or Apple® Lightning to USB 3 Camera Adapter.
n Standard 5V USB power supply
While either Apple® adapter will work, we recommend using the Lightning to USB 3 Camera Adapter, as it allows you to simultaneously charge your iOS device while connected to the Polar 2 interface.
NOTE: Polar 2 will not operate without external power. This means that Polar 2 cannot be powered from your iOS device alone. 3rd party adapters are not supported. Please use genuine Apple® adapters.
TIP: Any standard 5V USB power supply will work, including, for example another phone charger.

Lightning to USB Camera Adapter

iPhone

iPad

Apple® Lightning
3 to USB Camera
Adapter

1

2

1. Using the included DC to USB-A cable, connect the DC end to the DC 5V port on the rear panel of your Polar 2. Connect the USB-A end to a 5V USB power supply.
2. Connect the USB-C end of the USB-A to USB-C cable to your Polar 2. Connect the the USB-A end of the cable to the Lightning to USB Camera Adapter.
3. Connect the adapter to your iOS device.

22

Contents Page

iOS (cont’d)

Lightning to USB 3 Camera Adapter

iPhone

iPad

Operation
With your Polar 2 connected to your iOS device, simply open your preferred audio recording app (such as GarageBand®) and start recording and playing back audio.

3
Device Charger (Optional)

1

2

4

Apple® Lightning to

USB 3 Camera

Adapter

1. Using the included DC to USB-A cable, connect the DC end to the DC 5V port on the rear panel of your Polar 2. Connect the USB-A end to a 5V USB power supply.
2. Connect the USB-C end of the USB-C to USB-A cable to your Polar 2. Connect the the USB-A end of the cable to the Lightning to USB 3 Camera Adapter.
3. Connect the adapter to your iOS device.
4. (Optional) Connect a charger to your iOS device.

23

Contents Page
Specifications

Specification Overview Number of Microphone Preamps Phantom Power Instrument Inputs Line Inputs Line Outputs Headphone Outputs Loopback Connectivity Protocol Form Factor Simultaneous I/O A/D Resolution Bus Powered Supported Sample Rates Microphone inputs Frequency Response Dynamic Range

Blackstar Polar 2
2 Yes, 48V
2 2 2 1 Yes USB Type-C USB 2.0 Desktop 4 x 4 (including Loopback inputs) 24-bit/192 kHz Yes (960mA) 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
20-20kHz ±0.1dB 109dB (A-Weighted)

THD+N

-101dB (-103dB A-Weighted); 0dB Gain, 950mVrms, 20Hz-24kHz BW

Noise EIN Maximum Input Level Gain Range Impedance Line inputs Frequency Response Dynamic Range

-121dBu (A-Weighted) 2dBu 53dB 3.3k
20-20kHz ±0.2dB 112dB (A-Weighted)

THD+N

-85dB (-85dB A-Weighted); 8dB Gain, 380mVrms, 20Hz-24kHz BW

Maximum Input Level Gain Range Impedance

10dBu 55dB 500k

24

Contents Page
Specifications (cont’d)

Specification Instrument inputs Frequency Response Dynamic Range THD+N Maximum Input Level Gain Range Impedance Line outputs (Balanced) Frequency Response Dynamic Range THD+N Maximum Output Level Impedance Headphone outputs Frequency Response
Dynamic Range
THD+N
Maximum Output Level
Maximum Output Power
Impedance

Blackstar Polar 2
20-20kHz ±0.2dB 112dB (A-Weighted)
-82dB (-81dB A-Weighted); 3dB Gain, 630mVrms, 20Hz-24kHz BW 10dBu 46dB 500k
20-20kHz ±0.15dB 93dB -80dB
12.8dBu 1k
20-20kHz ±0.15dB @ 33 / 300 110dB @ 33 107dB @ 300
-83dB @ 33 -85dB @ 300
7dBu into 33 15.2dBu into 300
85mW into 33 66mW into 300
10

25

Contents Page
Specifications (cont’d)
Specification Instrument inputs Analogue to Digital Converter THD+N Dynamic Range Digital to Analogue Converter THD+N Dynamic Range Power USB External (Optional) Accessory

Blackstar Polar 2
-100dB THD+N 114dB
-100dB THD+N 114dB
960mA 4.8W
USB A to DC cable, USB A to C cable

26

247401M-VA-2

Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK For the latest information go to: www.blackstaramps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>