NAPOLEON DLKBLP42 High Definition Driftwood Logs User Manual
- June 13, 2024
- Napoleon
Table of Contents
NAPOLEON DLKBLP42 High Definition Driftwood Logs User Manual
Burner Overview
NOTE: At no time should the logs impinge or go across the flames.
-
Remove stud A. Then place log #3 flat in front of the media barrier on studs B and C.
-
Place log #2 on the left side of the media tray.
note: For ease of installation, place some of the lava rock/ charcoal (supplied) around the rear logs, covering the media tray (not illustrated). Ensure the lava rock does not cover the burner and air intake areas.
-
Place log #5 on the front left side of the media tray.
-
Place log #7 on the front right side of the media tray with the smaller end of the log in front of the pilot light.
-
Place log #8 on the right side of the media tray with the smaller end on log #7.
note:
Place any remaining lava rock/charcoal (supplied) around the logs, covering
the media tray (not illustrated). Ensure the lava rock does not cover the
burner and air intake areas.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>