SMPLSP3 Wireless Bluetooth Speaker User Manual

: June 6, 2024
: smpl

Table of Contents

Introduction
What is in the Box
Product Specifications
Product Overview
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual

Introduction

Thank you for purchasing smpl. Bluetooth speaker. We advise you to read this manual thoroughly before using it and keep this manual for future reference.

What is in the Box

simply. Bluetooth speaker ×1
USB charge cable ×1
3.5mm Aux-in cable ×1
User manual ×1

Product Specifications

Model name: smpl. audio3
Output: 14Wx2
Input: 5V 2A
Battery: Li-ion 7.4V 2200mAh
Signal to noise ratio: ≥90db
Unit dimension: 20012665 MM
Net weight: 940g
Charge time: 3.5-4 hours
Play time: 12Hours (at 50% of the volume with light show) 16Hours (at 50% of the volume without the light show) Warranty: 12-month limited

Product Overview

No	Buttons	Tou want to	How to
1	****	Turn on/off	Press and Hold
---	---	---	---
Switch mode	Press
2	ADD	Enter/Exit TWS mode	Press and Hold
3		Short press to switch light mode	Details please refer to D

the part of “light Mode Direction”

How to Use smpl. audio3
Charge the speaker
Use the supplied USB cable to charge the speaker directly from your cell phone adapter (Please make sure its output is 5V). Make sure that the speaker is fully charged before using it for the first time. The charging indicator will remain RED when charging and be off once fully charged.
Pair your Bluetooth-enabled device
Turn on the Bluetooth of your device and choose smpl. audio3 on the list. If the pairing succeeds, a clear prompt tone will be heard from the speaker. And you can see the connection status on your device. If your smart device cannot discover smpl. audio3 on the list or cannot succeed paired, please long press the play/ pause button of the speaker and then try pairing again.
How to Set Up True Wireless Stereo Pairing

Turn on the two smpl. audio3.
Choose one speaker as the main speaker. Press 3 seconds button of the main speaker. You can hear the electronic prompt tone, and the LED indicators will be flashing white rapidly.
Make sure the second speaker is not connecting with any Bluetooth device. Then the second speaker will automatically pair with the main speaker.
When the two speakers succeed in stereo pairing, you will hear the electronic prompt tone. The LED indicator of the two speakers turns solid white.
To disconnect the TWS mode, please press the button of the main speaker for 3 seconds. You can hear the electronic prompt tone from the main speaker, and the white LED indicators”* ” will be turned off.

Notice

The secondary speaker will reconnect with the last Bluetooth device if they used to be connected. Press and hold the Play/Pause of the second speaker to disconnect from the Bluetooth device. Then the second speaker starts to automatically pairing function.
TWS mode cannot be activated through Micro SD card mode.
If one or both speakers are turned off without disconnection from TWS mode, the speakers will default to reconnect when they turn on again.

How to Change LED Light

smpl. audio3 has three LED light modes.
A. The central lights and outer light are all turned on.
B. Only outer light is turned on, and the central lights are turned off.
C. All lights are turned off.
Press the button ” ” once to change the different modes.
3. The light mode default to the last mode which set last time.

LED Indicators

No	Indicator	Indicator state	System state
9		Solid red	On charging
---	---	---	---
OFF	Light off	Fully charged
10		Please refer to the part of”Set up True Wireless Stereo Pairing”
11		Flashing blue rapidly	Waiting for Bluetooth pairing
Solid blue	Bluetooth connected status
Solid green	TF card mode
Solid red	Aux-in mode

Trouble Shooting

Problems	Solutions
No power	• Battery may be in protection mode or drained. Plug power in and

charge the speaker.
Low battery prompt tone| • Please recharge the speaker.
Battery can not charge| • Make sure you use a USB cable provided by smpl. or bought from a qualified manufacturer.
Speaker can not pair with the mobile device| • Turn the Bluetooth feature off and turn it on again on your mobile device. Remove your speaker from the Bluetooth list and pair again.
• Pair different devices.
• Reset your speaker.
No sound| • Please select ” smpl. audio3 “as the default playback device.
• Increase the volume on your speaker and your Bluetooth device.
• Make sure the sound prompts are on.
• Play different music sources.
• Try to pair another Bluetooth device.
• If two devices are connected, pause your other device.
smpl. audio3 speakers can not pair together manually| • Make sure two speakers disconnect the Bluetooth (Both Bluetooth indicators of two speakers flash blue). Press and hold the button of one speaker until it flashes white and waits for auto-pairing.
---|---
Poor sound quality /buzzing sound| • Try to play different music source.
• Check the device’s audio settings.
• Charge the speaker until it is fully charged.
• Increase the volume.
• Try to pair another Bluetooth device.
Laptop prompts to install the driver| • This driver is not for”smpl. audio3″ but for your laptop Bluetooth function, please contact customer service of the laptop or Windows for help.
Cannot turn off the speaker| • Use a needle to poke the ” Reset” in the reset port.
Auto power off| • Contact smpl. customer service at hello@getsm.pl to disable auto power off by firmware upgrade.
Music intermittently/ Bluetooth not stable| • Try reset the Bluetooth of the speaker: in the shutdown state of the speaker, long press the power button. When the speaker is turned on, do not remove your finger. Keep holding the power button for a long time until the speaker changes from power on to power off again, then remove your finger.

Warnings
Do NOT drop, hit or shake the device. Do NOT place heavy objects on the top of the device. Do NOT store the device in a place with dust or high humidity. Do NOT disassemble, repair or modify the device by yourself. Do NOT use it when it is near microwave ovens or wireless LAN products. Do NOT use cleaning products that contain benzene, solvents or alcohol. Do NOT expose the device to excessive heat or direct sunlight for long periods of time. Use the supplied charge cable or a cable from qualified manufacturers to charge the device.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Happy?
We’re glad to hear it!
Please tell your friends& Share your
experience on Amazon by writing a review.
Questions or Issues?
Our customer support team would love to help!
Please contact us at hello@getsm.pl We’re here M-F From 9am-5pm PST