Yale YRBDGCB2 Communication Bridge for Home Automation Devices User Manual

June 6, 2024
Yale

Yale YRBDGCB2 Communication Bridge for Home Automation Devices

Yale-YRBDGCB2-Communication-Bridge-for-Home-Automation-Devices-
IMAGESpecifications

  • Model Name: Yale Connect Bridge Plus
  • Model Number: AYR-BDG-CB2
  • Bluetooth specification: V5 2.4 GHz ISM Band
  • Antenna: Internal single-band
  • Wi-Fi specification: 802.11a/b/g/n 2.4 GHz, 5 GHz
  • Antenna: Internal dual-band
  • Security: WPA2
  • Power supply: 5VDC, 1A

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by YALE Home, Inc. is under license. Other trademarks and trade names are those of their respective owners. Apple, Apple Watch, HomeKit, iPad, iPad Air, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. HomePod is a trademark of Apple Inc. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified bythe developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Environmental

Yale Connect Bridge Plus:
Dimensions: 3.75” x 3.5” x 1”
Weight: 3.2 oz
Certification: FCC, IC, CE
Operating temp: 32° to 104° F (0° to 40° C)
Storage Temp: -4° to 158° F (-20° to 70° C)
Operating humidity: 10 to 85% non-condensing

Safety

  • Read instructions before using this product

  • Keep these instructions for future reference

  • Heed all warnings on the product and in this manual

  • Follow all instructions

  • Do not use this unit near water or excessive moisture. Do not use this product near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture are present. Do not use with wet hands.

  • Avoid prolonged exposure to direct sunlight or heat above operating temperature

  • Do not install near any heat sources, such as radiators, heat registers, stoves or another unit
    (including amplifiers) that produce excess heat

  • nly use attachments/accessories specified by the manufacturer

  • o not swallow any parts. Keep any small parts away from children at all times, potential choking hazard.

  • This product contains no user-serviceable parts. Please contact your local supplier.

  • Modification of this product (including unauthorized hardware, firmware or software) in any way voids any warranty and compliance of this product and becomes the sole responsibility of the user.

  • User assumes all risk associated with the suitability, installation and performance of the module and other third-party components, hardware, software and services that user selects.You assume all risk associated with the suitability, installation and performance of the door lock and other third-party components, hardware, software and services that you select.

FCC Compliance Notice

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 ) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ISED Compliance Notice

INDUSTRY CANADA COMPLIANT This Class A digital apparatus complies with Canadian ICES-003. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to The following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement : This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. The minimum distance from the body to use the device under normal conditions is at least 20 cm (7.9 inches).This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Australia & New Zealand: RCM Radiation Exposure Statement This system has been evaluated for RF exposure for Humans as referenced in the Australian Radiation Protection standard and has been evaluated to the ICNIRP (International Commission on Non-Ionizing Radiation Protection) limits. This product has been deemed to comply with the RF exposure limits under the general public
limits. The minimum distance from the body to use the device under normal conditions is at least 20cm (7.9 inches).
This product complies with all the applicable requirements of the Regulatory Compliance Mark (RCM) for Australia & New Zealand and Radio Spectrum Management (R-NZ) requirements for New Zealand.

P/N AYR-BDG-CB2-TC-0028: Yale® is a registered trademark of ASSA ABLOY Residential Group. Other products’ brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only. ©Copyright 2021. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Residential Group is prohibited.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals