LIGHTWARE UCX-4X2-HC30 Taurus HDMI 2.0 and USB 3.1 Switcher User Guide

LIGHTWARE UCX-4X2-HC30 Taurus HDMI 2.0 and USB 3.1 Switcher

Front View

Rear View

Important Safety Instructions

Please read the supplied safety instruction document before using the product and keep it available for future reference.

Introduction

Lightware’s universal switcher enhances and extends the possibilities of a meeting room and allows meeting participants to easily use their own devices such as laptops, and preferred video conference platforms while also to utilize the available assets of the meeting space, just like the HDMI displays, room cameras and other USB peripherals. The device utilizes the USB-C connectivity for a simplified transmission of 4K video, audio, control signals and power, and allows data speeds of up to 5 Gbps under the USB 3.1 Gen1 and allowing video resolution capabilities up to 4K@60Hz at 4:4:4. The UCX-4×2-HC30D model also thrives when it comes to audio capabilities, offering analog audio de-embedding feature as well as support for DANTE/AES67 network connection to send DANTE/AES67 audio stream directly to a dedicated audio system.

Front Panel LED’s

Dante® Audio Out (in UCX-4×2-HC30D model)

Box Contents

Powering Options

UCX series switchers are designed to provide power delivery for the connected device over the USC-C connectors. The following operation modes are available:
1. Charge one device on the chosen port with up to 60W. The other port can supply up to 5V/3A.

2. Charge one device with 30W (in this case, the other USB-C port can supply 30W or 5V/3A)

Button functionality

Mounting the Device (with optionally available accessories)

The examples demonstrate the applications of UD Kit accessories:

Connecting Steps

Device Concept

AV Port Diagram

Audio Cable Wiring Guide
The Taurus UCX series is built with 5-pole Phoenix output connectors. See below a few example of the most common assembling cases.

Factory Default Settings

USB Port Diagram

GPIO (General Purpose Input/Output Ports)
The device has seven GPIO pins which operate at TTL digital signal levels and can be set to high or low level (Push-Pull). The direction of the pins can be input or output (adjustable). The signal levels are the following:

Plug pin assignment 1-6: Configurable, 7: 5V (max. 500 mA); 8: Ground The recommended cable for the connectors is the AWG24 (0.2 mm2 diameter) or the generally used ‘alarm cable’ with 4×0.22 mm2 wires. The maximum total current for the six GPIO pins is 180 mA.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>