atomi smart AT1351 Smart WiFi 4ft. LED Shop Light User Guide

: June 6, 2024
: Atomi Smart

Table of Contents

Get the app
Register
Add your smart device
Select the right network
Plug in your smart device
Connect to the network
Connect your smart device
Troubleshooting
Inside the box you’ll ﬁnd
Installation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Let’s get started!
Smart WiFi
4ft. LED Shop Light
Quick Start Guide

Get the app

Download the atomi smart app from the App Store or Google Play.

Register

Follow the on-screen instructions and register an account.

Add your smart device

Press “Add Device” or the “+” sign and choose the smart device to install from the device list.

Select the right network

Enter your WiFi password and “Conﬁrm”.
Make sure you’re connected to a 2.4GHz WiFi network (atomi Smart can’t connect to 5GHz networks).

Plug in your smart device

And press “Continue” on the atomi smart app.

Connect to the network

Press “Go to Connect” and follow the instructions on the screen

Connect your smart device

Select “atomi-smart-XXXX” on the network list to connect.
If you are not automatically directed to the WiFi list, go to SETTINGS on your smartphone and press WiFi.

Troubleshooting

Smart WiFi
4ft. LED Shop Light

I can’t ﬁnd the atomi.smart.XXXX network in my WiFi list.
Make sure your atomi smart device is plugged in and the light is blinking quickly. If not, pull the string for 10 seconds to reboot.

My WiFi network doesn’t appear in the atomi smart app.
Use your smartphone to conﬁrm that you have at least two WiFi bars in the vicinity of your atomi smartdevice. If not, move your atomi smartdevice closer to your router. (The list will refresh every 10 seconds).

Cannot connect to my WiFi network.
Make sure that you have entered the correct WiFi password during setup. Check if there are problems with your internet connection. If the WiFi signal is too weak, reset your WiFi router and try again.

My atomi smartdevice appears as “Unavailable” in the app.
Refresh the device list.

My atomi smart app is frozen.
Force quit and re-launch the atomi smartapp.

I just replaced my router.
To reset the WiFi without losing your atomi smart devices settings, hold down the power button and wait for the LED to change from amber to blinking white, then release. When the LED begins to alternate white and amber, follow steps 3-5 to associate your atomi smart device with your new network.

I’m still having trouble!
WiFi networks come in a lot of shapes and sizes with many quirks of their own. It doesn’t mean your atomi smart device is malfunctioning. If problems persist, please try these steps, in this order:

Force quit and re-launch the atomi smart app. Check to see if this ﬁxes the issue.
Unplug your atomi smart device and plug it back in. Check to see if this ﬁxes the issue.
Unplug your router and plug it back in. Check to see if this ﬁxes the issue.
Delete and reinstall the atomi smart app. Check to see if this ﬁxes the issue.

For more troubleshooting tips go to
www.atomismart.com/helpShopLight

Inside the box you’ll ﬁnd

Installation

Smart WiFi
4ft. LED Shop Light

Option A: Pendant Mounted

NOTE: The unit is intended to be installed directly beneath a ceiling- mounted receptacle. If there is excess cord, bind with string or a cable tie to keep it out of work space. IMPORTANT: Unplug the Smart Shop Light prior to mounting.

Attach the Ceiling Hooks
Choose a desired location for the light ﬁxture, making sure it is within reach of an outlet. Use a pencil to place a mark on the ceiling where each ceiling hook (part CC) should go. Screw hooks into place until secure.

Suspended to Ceiling

Hook the “S” hooks (Part BB) into each of the holes on both sides of the Smart Shop Light.
Hook the hanging chains (Part AA) into each of the ceiling hooks (Part CC).

Option B: Surface Mounted

Attach the Ceiling Hooks

Drill a 1/4 inch pilot hole into the marked screw locations.
Insert wall anchors (Parts DD).
Start the wood screws (Part EE) but do not tighten fully.
Slide the ﬁxture over until the narrow legs of the keyhole slots are under the heads of the wood screws (Part EE).

Secure the Fixture
Drill a 1/4 inch pilot hole nearby the ﬁxture’s receptacle. Insert wall anchors (Part DD) and tighten the wood screws (Parts EE).

Still can’t connect?
Need assistance?
Our friendly customer service team will work hard to put a smile back on your face. Here’s how we can connect.

1-800-757-1440
Mon-Fri 9:00-5:00 EST (US)

or support@atomiusa.com

Welcome to the atomi smart family!
We know you will love our products so much that we are giving you an exclusive 15% off your next purchase on atomismart.com.

| Log onto https://atomismart.com/shop-now/
---|---
| Add to Cart
| Enter promo code ATOMI15OFF
| Proceed to checkout
| Free shipping on orders over $50
within the contiguous US only

Terms and conditions apply;

The following terms and conditions apply to the promo code;

Coupon is only valid on the atomi smart website www.atomismart.com.
A valid code must be entered at the checkout page in order to redeem the promotion.
Customers can only redeem one time at checkout.
Customers can only use the promo code once.
atomi smart reserves the right to cancel or modify any order, or revoke the use of the promo code for any reason.
Unless otherwise stated, promo codes are not valid in conjunction with other promotions or discounts.
Additional terms and conditions may be specﬁed in relation to speciﬁc promo code (for example, duration, eligibility, discount amount and
products covered), and will govern the use and redemption of those vouchers.
Promo code is not exchangeable for cash.
atomi smart will not be liable and/or be required to offer replacement codes, discounts, credits, cash or otherwise compensate customers for:
a. discontinued or cancelled promo code;
b. improper use of, or inability to redeem, a promo code; or
c. the inability to redeem promo code due to technical issues.

FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to the two following conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Warning
This product can expose you to chemicals including Lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

For questions or concerns, email us at support@atomiusa.com
Manufactured and marketed by Atomi Inc. 10 West 33rd St., New York, NY 10001 atomi™ is a trademark of Atomi Inc. atomi smart® is a registered trademark of Atomi Inc.
Designed by atomi in New York. Made in China.
One-year limited warranty from the date of purchase against defects in material and workmanship.