bewello BW2010 Air Cooler and Humidifier User Manual
- June 6, 2024
- bewello
Table of Contents
bewello BW2010 Air Cooler and Humidifier
Air Cooler and Humidifier
Product description
As summer approaches, we will do our best to have a pleasant, livable temperature in our home. With this on-wheel air cooler, you can easily increase your comfort. Just fill the tank with cold water, add ice or put an ice pack in the tank and connect it to a wall socket, and you can already enjoy the cool breeze. The device is also able to increase the humidity in the air to prevent unhealthy low humidity.You do not need to get up from the chair to control the device, you can easily set the desired function with the help of the included remote control.
- Instant cool airflow
- Cools and humidifies at the same time
- High capacity water tank
- It can even be used with ice or ice pack
- Easy to remove and clean filter insert
- Manually adjustable vertical slats
- Quiet night mode
- Timer
- 3 blowing stages
- Included with remote and refill ice packs
- Oscillation function (horizontal)
- Easy to move thanks to the wheels
SPECIFICATIONS
- Power supply: AC 220 – 240 V, ~ 50/60 Hz
- Size: 590 x 215 x 245 mm
- Material: Plastic
- Airflow: 350 m3 / hours
- Tank size: 3.8 l
- Power supply of remote: CR2025 – 3 V
- Cable length: 120 cm
- Color: White
- Fan: Adjustable in 3 steps airflow strength (max 6.5 m/s)
First steps
Place the fan on a horizontal, stable, dry surface. Make sure that the
appliance cannot roll. Fill the tank of appliance with water. (If possible,
use softened tap water or distilled water to avoid possible limescale
formationThe mains plug of the appliance must only be connected to a socket
with a compatible voltage level. Connect the device and turn it on using the
power button on the top.
Ice pack refill
The package includes 2 ice packs. Before first use, the cap should be
removed and filled with tap water. Make sure that the icing crystals in the
ice pack do not scatter. Ice packs may only be filled with water up to the
„MAX” mark. N do not use other liquids! After filling, tighten the cap firmly
onto the ice pack bottle!
You can also use the appliance as a conventional fan:
By pressing the power button on the top of the device, the fan operates
with low air flow. You can switch off the device by pressing the button again.
The „Speed” button on the top of the device allows you to switch between the 3
blow speed. The device also has a pleasant cooling and humidifying function if
the built-in tank is filled with cold water. The water tank cannot be removed
from the appliance! When filling, make sure that only water enters the tank
and that the water level is constantly monitored. Do not overfill the tank! If
required, you can insert ice or the supplied ice pack into the tank. It is
essential that there is a sufficient amount of water in the tank for the
cooling function of the appliance to function properly.
Modes
Day: The device operates at maximum efficiency. By default, it releases
as much water vapor as possible into the air. This provides a pleasant,
cooling breeze.
Power saving: Adjusts the fan speed so that the device consumes less
power.
Night: Quiet operation of the device. You can even sleep with the device
on.
Timer: The timer button automatically shuts off the device after the set
time. Hourly timing is possible, so the device can be switched off in a wide
range: between 1 and 12 hours. When using the timer and cooling function
together, make sure that there is enough water in the tank for that duration!
Oscillation: Press the (<->) button to start horizontal oscillation (slat
movement). When the button is pressed again, the movement of the slats stops
at that position. The horizontal slats can be manually adjusted to the
appropriate angle.
WARNINGS!
Do not add essential oil to the appliance or the water tank of the appliance!
General advice
The danger of suffocation! Please keep the packaging of the appliance out of the reach of children as it may lead to suffocation. The appliance may only be used by adults, the storage location must be chosen so that children do not accidentally access it. Children should be supervised to ensure that they do not play with the appliance. The device may only be used for its intended purpose! When using, pay attention to the physical safety and safety of those around you (especially children). The device may only be used by people who have read, understood and are able to operate this device in accordance with the operating instructions! People with reduced mental, physical or sensory capabilities must not use the device! Children should not use the appliance! Do not use the device if you have previously dropped or struck it and it is visibly damaged! It is strictly forbidden to modify or disable safety devices, use as intended!
Risk of electric shock
Never operate the appliance with wet, wet hands! Touching the device,
including the power plug and cable, with wet hands is strictly prohibited! The
device may only be connected to AC power with the correct voltage. Only
connect the appliance to a mains socket that is safe to operate or has been
installed by a specialist in accordance with IEC 60364-1. Do not point the
device directly at electrical equipment, as moisture may enter and damage
them. In this situation, there is a risk of short circuit and electric shock.
Do not fill the appliance with water while it is connected to the mains! Do
not use the appliance near a bathtub, shower, swimming pool or sink containing
water.
Before each use, make sure that the appliance and the mains cable and
connectors are intact! Only undamaged devices may be operated! If you
experience any damage, do not use the appliance, contact a specialist! During
use, pay attention to the integrity of the power cord, avoid edges or objects
that can damage the surface of the cord. Avoid the use of extension cords or
splitters, as they are a source of danger during operation. Use only splash-
proof extension cords with a cross-section of at least 3 x 1 mm2. Always
unplug the appliance when not in use. Maintenance work must only be carried
out with the mains plug removed.
Operation
Do not fill the tank with detergent! Use the appliance only above freezing temperature 0 °C to avoid condensation and electric shock. Never leave the appliance unattended when it is connected to the mains! The device should only be used indoors, protected from environmental factors. (IP20) Always operate and store the device as described! Always check the integrity of the appliance, cable, plug and accessories! Do not use the device in case of damage! Use the dehumidifier only on a horizontal, stable surface! Be careful not to move or rotate the appliance if there is water in the appliance, as this may lead to electrical damage or short circuits Be careful not to move or rotate the appliance if there is water in the appliance, as this may lead to electrical damage or short circuits! If the unit is accidentally moved or overturned, immediately disconnect the power supply (~ 230 V) and allow the unit to dry for at least 48 hours. (Do not use hair dryers, radiators or other radiators during drying) First, make sure that the appliance is completely dry before next useDo not expose the device to radiant heat (sunshine, radiator, etc.). Do not reach into the slots of the guard during operation with any object, as there is a risk of accident! Do not cover the device with any material! Do not disassemble the device! It is forbidden to change the parameters of the device! The manufacturer and distributor shall not be liable for any damage resulting from improper use.