REEF OCTOPUS Classic-INT Series Classic 110-INT Protein Skimmer Instruction Manual

REEF OCTOPUS Classic-INT Series Classic 110-INT Protein Skimmer

Instruction

Maintenance

• Collection Cup: Collection Cup (part B) should be cleaned at least once every 7-10 days, depending on the organic waste collected.
• Skimmer body: It is recommended that you clean the Skimmer Body once every 3-6 months. Clean and Rinse off with fresh water only.
• Silencer: It is recommended to clean the silencer once every 2-3 months to prevent blocking.
• Pump: It is recommended to clean the Pump once every 3-6 months. Check and Clean the lmpeller,and if necessary soak the Pump and Impeller in White Vinegar to dissolve stubborn calcium deposits.

Safety Tips

• Check the voltage shown on the label of the Pump corresponds to the voltage of the main supply.
• Never allow the Pump to run dry.
• Do not touch the Socket with wet hands.
• Do not clean the Skimmer with any cleaning agents.

HONYA CO., LTD is committed to continuous product development, we hereby reserve the right to revise the product specifications or designs without prior notice. For any further enquiry/assistance and latest product updates, Please Visit at www.reefoctopus.com.

Product specification

Explosion Chart

• Part (Q) Pump Inlet Cover,is not included for AQ-2000S and AQ-3000S

Assembly

• STEP 1

  • Insert the Venturi to the intake of the Pump

• STEP2

  • Insert the pump to the Skimmer Body
  • Attach the Silencer Holder
  • Slide the Silencer onto the Holder gently
  • Insert the Air Hose
  • Insert the Pipe/Gate Valve
  • Insert the Collection Cup

• STEP3

  • Position the Skimmer into the Sump

  • For optimal performance the water level in the Sump should be as per our recommendation
    {Please refer to our product specification sheet )

  • Maintain consistence water level. Fluctuating water level will affect Skimmers’ performance

• STEP4

  • Ensure that the Valve (part k) is fully open, before starting Pump
  • Adjust the valve until the Skimmer water level is between the Skimmer’s Neck and just below the Collection Cup
  • New Skimmer will need a run-in period of 1-2 weeks before stabilizing. During this time, please monitor water level to prevent overflow into the Collection Cup

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>