REEF OCTOPUS HY-1000W HY Water Blaster Pump Instruction Manual
- June 5, 2024
- REEF OCTOPUS
Table of Contents
REEF OCTOPUS HY-1000W HY Water Blaster Pump
Overview
- Exceptionally durable ceramic impeller made with Silicon Nitrite to resist abrasion and lower operating temperature.
- HY-10000S, HY-10000W, HY-12500W, HY-16000W uses alloy.
- Uses Neodymium
- Pump Body is manufacture with a mixture of high-grade PC+PET This material can be submerge long term in water without fatigue associated with regular plastic and is able to withstand ozone.
- Cooling chambers build within pump body to lower the operating temperature and thus enhance the pump longevity.
- Suitable for both Fresh and Marine
- Suitable for Wet or Dry
Safety Tips
- Do not operate this pump without water flowing through. Overheating pump could potentially be a Fire Hazard.
- Do not operate this pump in water where debris (sand, mud, pebbles etc) are found, this will damage the impeller and short-circuit the pump.
- For Skimmer Pump, always operate with air intake open to prevent damage to the needle wheel impeller.
- Please do not carry the pump via the power cable only, this will cause the power cable to break.
Skimmer Pump Assembly
Water Pump Assembly
Package
**** Please check content in the package
-
Pump Bod
-
Skimmer Pump Accessories
-
Water Pump Accessorie
(g| B| El| El| | D| D| 0| | Model
---|---|---|---|---|---|---|---|---|---
2| 2| 2| 2| | 2| | | 4| HY-1000W
2| 2| 2| 2| | 2| | | 4| HY-2000W
2| 2| 2| 2| | 2| | | 4| HY-3000W
2| 2| 2| 2| | 2| | | 4| HY-4000W
| | | 2| | 2| 2| 2| 4| HY-5000W
| | | 2| | 2| 2| 2| 4| HY-7000W
| | | | | 2| 2| 2| 4| HY-10000W
| | | | | 2| 2| 2| 4| HY-12500W
| | | | | 2| 2| 2| 4| HY-16000W
Size
Model | Inlet Size | Outlet Size | A | B | C |
---|---|---|---|---|---|
mm | inch | mm | inch | mm | inch |
HY-1000W | 25 | 3/4 | 20 | 1/2 | 115 |
HY-2000W | 25 | 3/4 | 20 | 1/2 | 115 |
HY-3000W | 32 | 25 | 3/4 | 145 | |
HY-4000W | 32 | 25 | 3/4 | 145 | |
HY-5000W | 40 | 1-1/4 | 32 | 145 | |
HY-7000W | 40 | 1-1/4 | 32 | 145 | |
HY-10000W | 40 | 1-1/4 | 32 | 165 | |
HY-12500W | 40 | 1-1/4 | 40 | 1-1/4 | 165 |
HY-16000W | 40 | 1-1/4 | 40 | 1-1/4 | 165 |
- Skimmer Pump Specifications
Model| Voltage/ HZ| Power| Air Intake| Flow Rate
---|---|---|---|---
| V/HZ| w| LPH| GPH| LPH| GPH
HY-1000S
| 220-240/50| 15| 540| 143| 520| 137
120/60| 20| 644| 170| 568| 150
HY-2000S
| 220-240/50| 25| 960| 253| 900| 238
120/60| 30| 1022| 270| 946| 250
HY-3000S
| 220-240/50| 30| 1100| 290| 1550| 409
120/60| 35| 1136| 300| 1609| 425
HY-5000S
| 220-240/50| 40| 2100| 554| 1700| 449
120/60| 55| 2385| 630| 1817| 480
HY-10000S| 220-240/50| 100| 4000| 1056| 3200| 845
120/60| 125| 4542| 1200| 3293| 870
- Water Pump specification
Model| Voltage/ HZ| Power| Head Height| Flow Rate
---|---|---|---|---
| V/HZ| w| m| Ft.| LPH| GPH
HY-1000W
| 220-240/50| 13| 1.4| 4.6| 1600| 422
120/60| 13| 1.4| 4.6| 1666| 440
HY-2000W
| 220-240/50| 18| 1.8| 6.0| 2000| 528
120/60| 18| 1.8| 6.0| 2101| 555
HY-3000W
| 220-240/50| 30| 2.3| 7.5| 3400| 898
120/60| 35| 2.6| 8.5| 3483| 920
HY-4000W
| 220-240/50| 40| 2.7| 8.9| 4200| 1109
120/60| 45| 2.9| 9.5| 4599| 1215
HY-5000W
| 220-240/50| 55| 3.3| 10.8| 5200| 1373
120/60| 60| 3.4| 11.0| 5489| 1450
HY-7000W
| 220-240/50| 70| 3.6| 11.8| 6900| 1822
120/60| 80| 4.3| 14.0| 7382| 1950
HY-10000W
| 220-240/50| 95| 4.3| 14.0| 10000| 2640
120/60| 120| 4.9| 16.0| 10221| 2700
HY-12500W
| 220-240/50| 165| 4.8| 15.7| 12500| 3300
120/60| 175| 5.6| 18.5| 12492| 3300
HY-16000W
| 220-240/50| 200| 5.1| 16.7| 15000| 3960
120/60| 250| 6.7| 22.0| 15596| 4120
Pump Perfomance
- Optimal operating water temperature between 0-35 ‘C.
- Do not operate and expose this pump to direct
Maintenance
- For your safety, please ensure that this pump is plug into a power supply with earthing (grounding) connection.
- Please ensure that your pump is unplug before
- Please ensure that both the power plug and your hands are dry before plugging in and turning on this pump.
- Warranty will be void if you attempt to extent or splice power cable or make any modifications to the pump.
- During operation, pump will be warm to touch, this is.
Troubleshooting
Abnormal noise when pump is running.| Debris is trap inside pump chamber.| Off
the pump, unplug the pump from power supply and remove debris from pump’s
chamber and impeller.|
---|---|---|---
Pump not able to start/run.| 1. Larger debris could be trap inside the pump’s
chamber.
2. Impeller is stuck or not turning.
| Check the Impeller to ensure that it is not cracked or broken.
Plug in pump and the circuit breaker activated.| Electrical fault.| Disconnect
the pump and contact our After Sales Service in your region.
Minimal flow or no flow.| ****
1. Intake is block, remove blockages.
2. Pump is not fully submerged in water.
| Check both water level and/or intake.
Abnormal or low air volume for Skimmer pump.| 1. Intake pipe is blocked or
kinked.
2. Air Diffuser is blocked.
3. Misplaced Impeller.
4. Silencer is choked.
| Check all the above.
Abnormal vibrations.| Abnormal low power operations.| Ensure power supply grid
is restore before plugging pump in.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>