REEF OCTOPUS Regal-S Series Regal 150-S Protein Skimmer Instruction Manual

REEF OCTOPUS Regal-S Series Regal 150-S Protein Skimmer

Product specification

Item No.| Product| Fit Pump| Cup Diameter| Footprint| Height| Output Size| Tank Volume| Recommended sump water level
---|---|---|---|---|---|---|---|---
| | | mm| inch| mm| inch| mm| inch| mm,| | L| US Gal| cm| inch
120201| Regal 150-S| VarioS 2-S| 150| 5.9| 230190| 9.17.5| 582| 22.9| 40| 1-1/4| 800| 21,1| 118–22 .| 7.0-8 .7
120202| Regal 200-S| VarioS 4-S| 200| 7.9| 295245| 11.69.7| 600| 23.6| 50| 1–1/2| 1500| 396| 18–22| 7.0-8 .7
120203| Regal 250-S| VarioS 6-S| 250| 9.9| 350295| 13.811.6| 620| 24.4| 50| 1-1/2| 2400| 634| 20-25| 7.9-9.9
120204| Regal 300-S| VarioS 6-S| 300| 11.8| 385330| 15.213.0| 650| 25.6| 50| 1-1/2| 2800| 739| 20-25| 7.9-9.9

Explosion Chart

Assembly

STEP1

Using the screw(Part U) to secure the Pump to the skimmer base,tighten and align the bubble plate chamber using the round nut(Part 0) as p,er our explosi·on chart

STEP2

1. Attach the Skim,mer Body onto the Skimmer Base and tighten Screws
2. Insert the Venturi· to the intake of the Pump
3. Attach the Silencer Holder(Part J)
4. Slide the Silencer onto the Holder gently
5. Insert the Afr Hose
6. Insert the Gate ValveNent Pipe( Parts DlF)
7. Insert the Collection Cup

STEP 3

1. Position the Skimmer into the Sump
2. For optimaI performance the water level in the Sump should be as per our recommendation (Please refer to our product specification sheet)
3. Maintain consistence water level. Fluctuating water level will affect Skimmers’ performance

STEP 4

1. Ensure that the Valve (part D) is fully open, betore starting Pump
2. Adjust the valve until the Skimmer water level is between the Skimmer’s N,eck and just below the Collection Cup
3. New Skimmer will need a run-in period of 1-2, weeks before stabilising. During this time, please monitor water 1evel to prevent overflowing! into the Collection Cup.

Maintenance

• Collection cup: Collection Cup (part B) should be cl,eaned at least once every 7-10 days, depending on the organic wast,e collected.
• Skimmer body: It is recommended that you clean the Skimmer Body once ,every 3-16 months. Clean and Rinse off with fresh water only.
• Silencer: It is recom:mended to clean the silencer once every 2-3 months to prevent blocking.
• Pump: It is recommended to clean the Pump once every 3-6 months. Check and Clean the Impeller, and if necessary soak the Pump and Impeller in White Vinegar to dissolve stubborn calcium deposits.

Safety Tips

• Check the voltage shown on the label of the Pump corresponds to the voltage of the main supply.
• Never allow the Pump to run dry.
• Do not touch the Socket with wet hands.
• Do not clean the Skimmer with any cleaning agents.

HONYA CO., LTD is committed to continuous product development, we hereby reserve the right to revise the product speciifications or designs without prior notice.
For any further enquiry/assistance and latest product updates,
Please Visit at www.reefoctopus.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>