REEF OCTOPUS Varios-6 Controllable DC Circulation Pump User Guide
- June 5, 2024
- REEF OCTOPUS
Table of Contents
REEF OCTOPUS Varios-6 Controllable DC Circulation Pump
Overview
Legend
-
0 0-10V Input (3.5mm Audio port) , compatible with other controller;
-
Power supply Connection;
-
Connection for VarioS Pump;
-
Connection to a Float Switch;
Press -
Power ON Switch – press once to toggle unit On/Off. During “Pause” function, press once to cancel “pause” function;
-
Pause function – 15mins or 60mins options. Press once for 15mins and twice for 60mins “pause” function;
-
Press 7 ( ) for Connection Status;
- depress 7 to FS ON/OFF light “on”= Float Switch operational;
- depress 7 to FS ON/OFF light “off’= Float Switch not operational;
-
Flow Rate Controller for VarioS Pump “+” and “-” to adjust the desired flowrate ;
-
Flow Rate Controller for VarioS Pump “+” and “-” to adjust the desired flowrate ;
Lights Status Monitor -
FS ON/OFF light “on” = Float Switch operational;
FS ON/OFF light “off’ = Float Switch not operational; -
FS STATUS Light “on” = DC Pump cannot work (Check water level, when
Float Switch is connected); -
Pause Function light “on”= pause for 15mins;
-
Pause Function light “on”= pause for 60mins;
-
0-10V light “on”= 0-10V connected;
-
5 Steps Flow Rate Indicator Lights;
-
5 Steps Flow Rate Indicator Lights;
NOTE
- FS STATUS Light “on”and FS ON/OFF light “on” = Float Switch detect rising water level, DC Pump will not work, please check your system;
- When using 0-10V to control DC Pump, flow rate will not be indicated on the 5 Steps Flow Rate Indicator;
- When not using a Float Switch, this function must be disabled, if this function is not disabled, your pump will not work;
0-10V Wiring diagram:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>