THRUSTMASTER T150 Fore Feedback Racing Wheel Instruction Manual

: June 6, 2024
: THRUSTMASTER

Table of Contents

Install the drivers
Restart the computer.
Documents / Resources

THRUSTMASTER T150 Fore Feedback Racing
Wheel Manual firmware update procedure
(Windows 7 / 8 / 8.1 / 10)
On PC, the USB sliding switch on the T150 racing wheel’s base must always be set to the PS3 position!

Install the drivers

“PC – DRIVERS FORCE FEEDBACK:
https://support.thrustmaster.com/en/product/t150ffb-en/
During this procedure:

DO NOT CONNECT the T150 wheel to your PC before being prompted to do so.
The wheel must be connected directly to the computer’s USB port. We recommend that you do not use a USB hub for this procedure.
DO NOT CLICK in any Windows dialog boxes that may appear during the update.

Restart the computer.

3a) On Windows 7
In the “Start > All Programs > Thrustmaster > FFB Racing wheel > Control **Panel” menu, verify that your wheel appears under the name “Thrustmaster T150 Racing Wheel”.**

3b) On Windows 8 / 8.1 / 1010 Beta
From the Start menu, start typing the words Control Panel. This will bring up the Search function, giving you access to the Game Controller Control Panel.

It is also available under Apps > Thrustmaster:

Your wheel should appear under the name “Thrustmaster T150 Racing Wheel”.

Your wheel’s firmware version is displayed in the upper right-hand corner of the Control Panel tabs. Firmware: 35 is currently the latest version.

5) If the firmware version is earlier than 35:
a) On Windows 7
In the “Start > All Programs > Thrustmaster > FFB Racing wheel” menu, click on “ Firmware Update”.

b) On Windows 8 / 8.1 / 10
From the Start menu, start typing the words Firmware Update. This will bring up the Search function, giving you access to the Firmware application:

It is also available under Apps > Thrustmaster:

6)

The Thrustmaster T150 Racing wheel device is listed in the “Device” section.
The version of the firmware currently found in the device is displayed.
The “Firmware” section displays information regarding the version of the firmware that will be applied to the device.

7) When you are ready to continue, click OK.
IMPORTANT: DO NOT UNPLUG your wheel from the USB port, and DO NOT DISCONNECT the wheel’s power supply during the firmware update procedure!

The firmware update procedure begins (the update progress is displayed onscreen).
During the firmware update, the MODE LED on the wheel will be OFF: this is perfectly normal.

The update program will inform you whether the firmware has been successfully updated.

If the firmware has been successfully updated, the wheel will automatically calibrate itself, and the MODE LED will return to its original state:

8) Click OK to return to the update program’s main window, and then click on to exit the program.

If the firmware update procedure has failed or displays an error message, please contact Thrustmaster technical support, who will guide you through the entire process to follow.
9) Once the firm
ware has been successfully updated, verify that the wheel is functioning properly in the Control Panel

Congratulations! You are now ready to play!