Shenzhen Dingsheng Communication Technology A18 Car Wireless Charger Instruction Manual

Shenzhen Dingsheng Communication Technology A18 Car Wireless Charger Instruction Manual

1.Car Wireless Charger Manual

Product Name: Car stand wireless charger
(Intelligent sensing)
Power: 15W, 10W, 7.5W, 5W
Effective transmission distance: 1-Bmm
Product size: 132mmx82mmx49mm
Charging interface: Type C
Packing list: Car bracket x 1, Manual Xl,
Data line x l, Car outlet base(clip)xl
Magnetic head x l (iPhone, type-C, Android)

2.Functional components

3. Specifications

1. Model: A 18

2. Color: Red/Tarnish/Gold/Silver

3. Weight: product net weight about 112.7g

4. Material: PC+ ABS Vacuum Plating

5. Input voltage of magnetic head: DC 5V/2A

6. Input voltage/current: 5V /2A, 9V /1.67 A, 12V /l.5A

7. Output power: 15W,10W, 7.5W, SW automatic identification

8. Charging power: 110K-205K Hz

9. Support Specifications: Qualified with QI Wireless Protocol Charging

10. Some support wireless fast charging equipment
    IPHONE: Iphone8/8P/X/XS/XSmax/ll/11Pro/11Promax
    HUAWEI: Mate RS/Mate20 Pro/Mate20 RS/P30 Pro/P40 Pro
    SAMSUNG: S7/S7 edge/S8/S8+/S9+/S10
    XIAOMI: MIX25/MIX3/Nl9/10

11. Devices that do not support wireless charging can only be recharged by cooperating with the corresponding magnetic plug

4. Instructions For Use

1. Connect the vehicle’s wireless charging device to the appropriate data cable when using it.

2. Connect the USB port of the data cable to the charging interface on the car(eg, cigarette lighter switching charger and USB charging port on the car.

3. After the equipment is powered on with DC5V-12V power supply and DC5V-12V power supply, the equipment will automatically clamp the telescopic arm once, and the blue indicator light will turn on and turn red, and the indicator light will be on for a long time. At this time, the device enters the normal standby state. When the front of the object is 5cm-20cm close to the device, the device will automatically open its arms. After putting the mobile phone into the device, the device will
   automatically clamp the mobile phone. At this time, the wireless charging will automatically charge the mobile phone. When charging, the blue indicator light (breathing light) of the device will be on. (mobile phone with wireless charging function is required). When you need to take out the mobile phone, you need to touch the front sensing area of the device, and the device will automatically open its arms and take it away.

4. This device has over-voltage protection, over-temperature protection, magnetic field protection, short-circuit protection if the device is abnormal, it will automatically stop working.

5. Precautions

1. Do not over-squeeze or hit the device
2. Do not use the wireless charger under severe high temperature, humidity or corrosive environment to avoid damaging the device’s circuit

FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>