DELTACO GAMING PK95R Wireless Mechanical Gaming Keyboard User Manual
- June 5, 2024
- DELTACO GAMING
Table of Contents
DELTACO GAMING PK95R Wireless Mechanical Gaming Keyboard
Key combinations
- FN + Windows key = Lock/Unlock windows key FN + I = Print Screen
- FN + O = Scroll Lock
- FN + P = Pause Break
- FN + J = Ins
- FN + K = Home
- FN + L = End
- FN + 1 = F1
- FN + 2 = F2
- FN + 3 = F3
- FN + 4 = F4
- FN + 5 = F5
- FN + 6 = F6
- FN + 7 = F7
- FN + 8 = F8
- FN + 9 = F9
FN + right ALT GR = Windows menu key
Caps lock + Any other keyboard key = Caps lock will function like the FN key.
For example, pressing Caps lock + 1 = F1. This function can be deactivated or
activated by pressing FN + Left Alt.
FN + ESC press and hold for about 3 seconds = Factory reset. Press and hold FN
- R for 3 seconds to pair with USB receiver. Please note that the receiver has been paired already and this is only for troubleshooting.
Battery
Battery indicator: check the battery level by pressing FN + Backspace, the
keys from 1 to 0 will be green (wireless only). 100% battery =
1,2,3,4,5,6,7,8,9,0 will be green.
75% battery = 1,2,3,4,5,6,7,8 will be green.
50% battery = 1,2,3,4,5 will be green.
25% battery = 1,2,3 will be green.
LED combinations
FN + right STRG = Change backlight mode
FN + right SHIFT = Change backlight colour
FN + page down = Change to static colour (mode)
FN + down arrow = Decrease backlight brightness
FN + up arrow = Increase backlight brightness
FN + right arrow = Increase backlight speed
FN + left arrow = Decrease backlight speed
LED modes
There are 5 backlight speeds. 3rd speed is default. The arrow keys will flash
3 times when it reaches lowest or highest speed.
There are 5 brightness settings (100%, 75%, 50%, 25% and off). 100% is
default. The arrow keys will flash 3 times when it reaches lowest or highest
brightness.
The keyboard has 20 LED modes in total (Not counting software modes).
Caps lock and Win lock will be static red when they are activated.
Connect
Use the switch underneath the keyboard to switch between Bluetooth, wired and USB receiver.
Switch to the middle = Wired connection and off (if cable is disconnected).
Wired connection: Use a USB-C cable to connect with a wired connection.
Switch to the right = 2.4 GHz wireless connection to USB receiver.
- The ESC key will flash green to indicate pairing mode (USB receiver).
- Connect the USB receiver to your device. The keyboard will connect automatically.
- Once connected successfully it will stop flashing.
Switch to the left = Bluetooth.
With Bluetooth you can connect up to 3 devices.
Quick press FN + Q/W/E = Quickly switch between 1, 2 or 3.
-
The ESC key will flash blue slowly to indicate Bluetooth mode (the ESC key will flash fast to indicate pairing mode).
-
Press and hold FN + Q for 5 seconds = Pair Bluetooth device 1.
Press and hold FN + W for 5 seconds = Pair Bluetooth device 2.
Press and hold FN + E for 5 seconds = Pair Bluetooth device 3. -
Once connected successfully it will stop flashing.
The keyboard will connect automatically to devices it has been connected to previously.
When switching to Bluetooth from wired or wireless 2.4G connection, the ESC key will flash blue if the connection was successful.
Note: With Bluetooth 4.0 or higher 2 names will be displayed. You can connect to any, but “5.0” is preferred choice. With Bluetooth 3.0 and lower only 1 name will be displayed.
The keyboard’s Bluetooth names:
- Black keyboard names are DK440 5.0 and DK440 3.0.
- White keyboard names are WK95 5.0 and WK95 3.0.
- Pink keyboard names are PK95 5.0 and PK95 3.0.
Sleep mode
If there is no activity within 120 seconds the keyboard will enter sleep mode. If the keyboard is disconnected from all devices or fail to connect it will enter sleep mode after 90 seconds. Press any key to wake up the keyboard.
Charging
Connect the USB cable to a computer to charge the keyboard. The keyboard can be used while charging.
Software
RGB with 16 million colors is only available via the software. The software is optional.