Amica KM 5011 Inox Kettle User Manual

Amica KM 5011 Inox Kettle

Product Information

The KM 5011 is an electrical kettle designed for heating water. It has a power rating of 1850-2200W and a capacity of 1.7 liters. The appliance operates on AC 220-240V / 50-60Hz power supply.

Safety Instructions

1. Do not operate the kettle with wet hands and do not immerse the body of the appliance in water or other liquids to avoid the risk of electric shock.
2. The kettle is not intended for use at altitudes greater than 2000 meters above sea level.
3. To turn off the appliance completely, pull the plug out of the wall outlet.
4. The escaping water or steam can cause burns, so avoid touching any parts of the kettle except the handle. Ensure that the lid is properly closed.
5. Only use the kettle with the lid closed.
6. The kettle is suitable for heating water only. Do not pour any other liquids into it.
7. Keep the appliance away from children and ensure they do not play with it.

Product Usage Instructions

1. Before using the kettle for the first time, boil clean water in it several times, filling it up to the maximum level indicated.
2. Use fresh, cold water for each boiling cycle.
3. Clean the external parts of the kettle with a damp cloth or sponge. Make sure the appliance is dry before reconnecting it to the power supply.
4. If water spills on the external components of the kettle, thoroughly dry them before using the appliance again.

SAFETY INSTRUCTIONS FOR USE

• If the power cord or plug is damaged, it should be re-placed by a professional repair shop in order to avoid hazard.
• This appliance is not intended for use by persons (including children) with physical, men-tal or sensory handicaps, or by persons inexperienced or unfamiliar with the appliance, unless under supervision or in accordance with the instruc-tions as communicated to them by persons responsible for their safety. Children shall not play with the appliance.
• This appliance can be used by children aged 8 years and old-er or by persons with physical, mental or sensory handicaps, or by those who are inexperi-enced or unfamiliar with the appliance, provided they are supervised or have been in-structed how to safely use the appliance and are familiar with risks associated with the use of the appliance. Ensure that chil-dren do not play with the ap-pliance. Do not allow children to clean and maintain the ap-pliance unless they are 8 years or older and are supervised by a competent person.
• Do not use the appliance if it shows any signs of damage to the power cord, or if the appli-ance has been dropped on the floor.
• Do not expose the appliance to rain or humidity, and do not
• This appliance is not intended for use at altitude greater than 2000 metres above sea level.
• If you want to turn off the ap-pliance completely, pull the plug out of the wall outlet.
  Warning: the escaping water or steam causes a risk of burns. When using the appliance, do not touch any parts of the kettle except the handle. Also, make sure the lid is properly closed. This appliance is suit-able for water heating only. Never pour any other liquids into the kettle.

In accordance with European Directive 2012/19/EU and Polish legislation regarding used electrical and electronic goods, this appliance is marked with the symbol of the crossed ­out waste container. This marking indicates that the appliance must not be disposed of together with other household waste after it has been used. The user is obliged to hand it over to waste collection centre collecting used electrical and electronic goods. The collectors, including local collection points, shops and local authority departments provide recycling schemes. Proper handling of used electrical and electronic goods helps avoid environmental and health hazards resulting from the presence of dangerous components and the inappropriate storage and

• processing of such goods.
• Carefully read this instruction before using the appliance.
• This appliance is for household use only.
• Note! Packaging materials (bags, polyethylene, polystyrene, etc.) should be kept away from children during unpacking.
• Children do not realize the dangers that can arise when using elec-trical appliances; therefore keep the appliance out of reach of chil-dren.
• Do not immerse the body of the appliance in water or other liquids. Immersing in water may cause an electric shock.
• If water spills on the external components of the appliance, dry it thoroughly before switching back on. Do not touch wet surfaces in contact with the appliance connected to power supply, immediately disconnect it from the mains.
• When pulling out the plug from the wall outlet, never pull by the cord, only the plug, holding the socket with your other hand.
• Do not attempt to remove any parts of the housing.
• Using attachments that were not supplied with the product may cause damage to the appliance.
• Never place the appliance on hot surfaces.
• Do not place the cord over sharp edges or near hot surfaces. Before you put the plug into the wall outlet, make sure your hands are dry.
• The kettle is a class I electrical shock protection appliance, and therefore power outlet to which it is connected to must be equipped with grounding pin.
• Do not put any objects inside the appliance.
• Use only clean, cold water and fill the kettle slowly ­ strong water jet causes water splashing.
• Never fill the appliance with water above the maximum level indi-cated.

This appliance generates heat.
The kettle switches off automatically when water boils. You can switch the kettle off before water boils using a switch. When the kettle switches off automatically (or when it was switched off manually), it may take some time (approximately 15 ­ 20 seconds to cool down) to be ready for re­use.
The kettle must only be used with the supplied base.

Do not touch the surface marked with this symbol. Do not touch the surfaces during or after operation of the appliance. These surfaces are hot.

• Unplug the kettle from the power outlet and wait until it cools down before cleaning.
• When boiling the water, parts of the kettle made of stainless steel become very hot.
• Do not switch on the kettle without an adequate amount of water (level marked as “min” on the scale).
• Do not leave the kettle unattended, and when not completely cooled down.
• Use only the handle to move the kettle, other external parts may be hot.
• Use the appliance on a flat and stable surface.
• Make sure that the voltage indicated on the nameplate corresponds to that of your home electrical mains. Alternating current must be used, typically marked ~.
• This appliance is intended for use at home or in facilities, such as kitchen for employees; in shops, offices and other working environments, use by the customers of hotels, motels and other residential facilities, in rural residential buildings, in the accommodation facilities.

SPECIFICATION

OPERATE THE APPLIANCE
Before using the appliance for consumption, boil clean water in it several times by filling the kettle to the maximum position. Use fresh, cold water for each boil cycle.

USE
Place the base on a solid and level surface.
Remove the kettle from the base, press the button on the handle to open the lid and fill the kettle with water as needed between the min­max level. Close the lid and put the kettle back on the base. Use the buttons to set the desired programme. When a boil cycle is completed, the appliance will turn off or maintain the temperature. Use the hot water from the kettle and put the appliance back on its base.

Note! Only use the kettle with its lid closed.

FEATURES AND COMPONENTS

• Programme 1 : Boil water (100°C) Press to start heating the water (one indicator above the display is on). When the set temperature is reached, you will hear a beep and the appliance will turn off.
• Programme 2 : Heat water to a preset temperature (40°C – 100°C) Press  several times to select the temperature, then press to start heating the water (one indicator above the display is on). When the set temperature is reached, you will hear a beep and the appliance will turn off.
• Programme 3 : Heat and maintain the temperature (40°C – 90°C) Press  several times to select the temperature. Then press  to start heating the water to the set temperature and then maintain the temperature for 1 hour (two indicators above the display are on). When the time elapses, you will hear a beep and the appliance will turn off.
• Programme 4 : Boil the water and maintain the temperature (40°C

Press several times to select the temperature. Press twice to boil the water to 100°C, and then to maintain the previously set temperature for 1 hour (three indicators above the display are on). When the time elapses, you will hear a beep and the appliance will turn off.
If you accidentally turn on the kettle without water, the safety de-vice will operate, and the kettle will turn off automatically after about 17 seconds. You will be able to use the kettle again when the heating element has cooled down and you fill the kettle with water.

CLEANING
Before cleaning, always unplug the appliance from the wall outlet and allow it to cool down completely.

1. Do not immerse the kettle, cord and power base in water and protect against contact with moisture.

2. Wipe the outside of the kettle with a damp cloth or mild cleaning agent; never use any poisonous cleaning agents.

3. Remember to clean the filter regularly. To facilitate cleaning, remove the filter by pressing the filter tab inside the kettle, and reinstall it after cleaning.
   NOTE: To prevent matting, do not use any abrasive cleaners, harsh chemicals, steel or wood to clean the outside of the kettle.

4. When the kettle is not in use and in storage, you can wind the power cord under the kettle base.

DESCALE YOUR APPLIANCE
If the appliance switches off before the water boils, it means des-caling is required. Descale your kettle periodically, as minerals dis-solved in the tap water can form limescale on the bottom of the kettle, which reduces the water heating efficiency. You can use a commercially available descaler and follow the instructions on its packaging. You can also use white vinegar and follow the instruc-tions below.

1. Fill the kettle with 3 cups of white vinegar and then add water  until it completely covers the limescale. Leave the solution in the kettle overnight.
2. Then pour the mixture out of the kettle, fill the kettle with clean water to the maximum level, bring it to a boil and then pour out the water. Repeat several times until the smell of vinegar disappears. Any limescale residue inside the spout can be removed by wiping with a damp cloth.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>