Dongguan Jiajiatong Plastic Mould JJT-963 Wireless Charging Station Instructions
- June 5, 2024
- Dongguan Jiajiatong Plastic Mould
Table of Contents
Dongguan Jiajiatong Plastic Mould JJT-963 Wireless Charging Station
Instructions
FEATURES
- This product is a Magnetic absorption vehicle wireless charger.
- Charging quickly, not burning hot.
- 360 degrees turn.
- Strong magnetic.
HOW TO USE
- Ball head through nut.
- Install the ball head into the ball socket from the side and tighten the ball head.
- Install this bracket air vent,then connecting a car charger compliant with QC 3.0 standard and USB to C cable to supply power.
Product Specification
- Name: Wireless Charging Station
- Model: JJT-963
- Material: PC
- Color: Black
- Input interface: TYPE C
- Output interface: Wireless
- Sensor Iuput: 5V=2A, 9V=1.7A,12V=1.5A
- Output: 5W/7.5W/10W/15W (Max)
- Weight: 50g (excl. accessory)
- Size: 616113mm (excl. accessory)
WARNING: Support Qi-compliant wireless charging devices In the process of charging, do not put metal materials like key ring, metallic phone case etc. on the back of phone device or wireless charger dirctly
To achieve best performance of this wireless charger, QC2.0/QC3.0 travel charger is suggested to adapt.
- FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party.Responsible for compliance could void the user’s authority to operate this equipment.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>