Walkera MINISE Mini SE Drones Instructions
- May 15, 2024
- Walkera
Table of Contents
MINISE Mini SE Drones
Ready to fly
Power on and connect
Note: Before the aircraft is powered on, make sure the Camera shield is
removed to affect the aircraft self-test.
-
Long press the power switch to turn on the remote control.
-
Short press the battery power switch once, then long press the power
switch for 3~5 seconds to turn on the aircraft. -
Put the aircraft in the horizontal position, wait until the aircraft status
indicator lights flash from yellow light fast flashing to green light slow
flashing to indicate that the connection code is successful.
Activating theMInI SE Aircraft
※ The MINI SE requires activation before first use. After powering
on the remote controller and aircraft , according the interface prompts
to activate Mini SE using WK Fly app. An internet connection is
required for activation.
Enter the flight interface
Click the WK Fly App icon → Activate Mini SE according to the interface
prompts→ Click ” ” on the main interface to enter the flight
interface.Click the WK Fly App icon → Activate Mini SE according to the
interface
prompts→ Click ” ” on the main interface to enter the flight
interface.
If you are flying without a network mirror, download an offline map of the
planned flight area in advance(Please download the offline map while
your mobile device is connected network).