BASEMENT WATCHDOG SIT-33D SIT Series Sump Pumps Instructions
- June 5, 2024
- BASEMENT WATCHDOG
Table of Contents
BASEMENT WATCHDOG SIT-33D SIT Series Sump Pumps
Basement Watchdog SIT Series Sump Pumps (SIT-33D/SIT-50D)
- Remove all debris from the bottom of the pit.
- Remove all debris floating in the water.
- Remove all debris from the float switch cage.
- Remove all debris around the air relief valve.
- Fill the pit with water. Make sure pump turns on at the intended level.
- While the pump is running, make sure pump is evacuating water at a good pace.
- While the pump is running, make sure a stream of water is escaping from the air relief valve.
- If not, clear the hole of any deposits or debris.
- If your pit, pump and discharge lines have developed a reddish, slimy buildup (iron ochre) or other deposits, use Basement Wash-Dog™, a pit cleaner that will address the buildup and leave your sump system flowing freely.
PARTS & SERVICE INFORMATION
You can receive technical support, parts, or service by calling Glentronics, Inc. at 800-991-0466, Option #3, emailing us at Service@Glentronics.com or by visiting the Basement Watchdog website at www.basementwatchdog.com Send your unit to the address (right) if repairs are needed:
CONTACT US
- Glentronics, Inc.
- ATTN: Repairs
- 645 Heathrow Drive
- Lincolnshire, IL 60069-4205
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>