Carisma GT24TR 1/24 Scale Micro 4WD Truggy User Manual

1/24 Scale Micro 4WD Truggy
User Manual

WHAT’S IN THE BOX

SAFETY PRECAUTIONS

SAFETY PRECAUTIONS

THIS MODEL IS ONLY SUITABLE FOR PEOPLE 14 YEARS OLD AND UP. THIS RADIO CONTROL MODEL IS NOT A TOY.
A beginner should seek advice from experienced people in order to assemble the model or parts correctly and to make the best performance.
• Assemble this model or parts only in place out of children’s reach, and take safety precautions before operating this model. The user is fully responsible for the model assembly and safe operations.
Introduction
This is a sophisticated hobby product and not a toy. It must be operated with caution and common sense. The user also requires some basic mechanical abilities. Fall to operate this product in a safe and responsible manner could result in Injury or do damage to the product or other properties. This product is not intended for use by children without direct adult supervision. The product manual contains instructions for safe operation and maintenance. It Is essential to read and follow all the instructions and warnings In the manual prior to assembly, setup, or use. In order to operate correctly and avoid damage or injury.
Safety, Precautions, and Warnings
As the user of this product, you ere solely responsible for operating it in a manner that does not endanger yourself and others or result in damage to the product or the property of others. This model is controlled by a radio signal that is subject to interference from many sources outside your control. This interference can cause momentary loss of control so It is necessary to always keep a safe distance in all directions around your model, as this will help to avoid collisions or injury.

• Always operate your model in an open area away from cars, traffic, or people.
• Avoid operating your model on the street where injury or damage can occur.
• Never operate the model out into the street or populated areas for any reason.
• Never operate your model with low transmitter batteries.
• Carefully follow the directions and warnings for this product and any optional support equipment (chargers, rechargeable battery packet, etc.) that you use.
• Keep all chemicals, small parts, and anything electrical out of the reach of children.
• Moisture causes damage to electronics. Avoid water exposure to all equipment’s not specifically designed and protected for this purpose.

ABOUT THE RADIO SYSTEM

CTX-2000 2.4GHz FHSS Technology System
The following is an overview of the various functions and adjustments found on the CTX-2000 radio system. It is important to read and understand all of these functions and adjustments before driving.
FUNCTIONS
TRANSMITTER CTX-2000
Steering Wheel : Control direction (Left/Right) of the RC model.
Throttle Trigger : Control speed and direction (Forward/Brake/Backward) of the driving model.
ON / OFF Switch: Power ON / OFF the transmitter.
SW1 Button: Is used to synchronize the connection between the transmitter and the receiver. It also serves as an additional function on a different model.
LED Indicator: For indicating battery low, pairing in progress, and normal operation.
AN: Adjust the maximum steering angle on both sides when the model turns Left / Right.
St Trim Dial: Adjust the neutral position of the steering servo when model wheels are straight ahead.
TH.Trim Dial: To adjust the throttle position
Steering Reverse: Reverse the response direction when operating the Steering Wheel.
Throttle Reverse: Reverse the response direction when operating Throttle Trigger.
Throttle Limit Switch : Set the max Forward Speed of the model. ‘ In general, users will experience understeer when making a wide turn at high speed or oversteer when making a sharp turn at high speed (easy to spin out). Users should practice the Throttle and steering approach for different cornering at a different speed or road surface.

Battery Installation

1. Supplied with 4 x 1.5V AA Batteries, the radio can be operated for a few hours. Installation: Remove the battery compartment cover as shown below.
2. Install the batteries observing the polarity marked on the battery compartment.
3. Then reinstall the battery compartment cover as in the picture shown below.

Warning: Never disassemble batteries or put the batteries in fire, chemical agents, otherwise they may cause personal injuries or property damages.
Battery Disposal: Observe corresponding regulations about wasted battery treatment regulations, 1. After running out of power, dispose of wasted battens in designated areas far away from the water supply, household areas, and planted areas. 2. Submit the wasted batteries to specific recycling stations.

Battery LED Indicator
The LED solid on indicating that the batteries have sufficient power. When batteries voltage drops below 4 volts, LED will Flash, indicating batteries power is low and should be replaced.

ATV
ATV enables to adjustment of the maximum steering angle of the servo on both sides (Left and Right) when the model makes steering. The AN affects the sensitivity of servo. Reducing dual-rate value can lower the sensitivity of servo and reduce the same maximum steering angle on both sides. Remember to adjust the AN within the adjustment range.

Pre-Run Check

1. Steering: Adjust the steering trim to keep the front wheels in a straight line when the steering wheel remains in a NEUTRAL position.
2. Throttle: Adjust the throttle trim to make the motor stop while the throttle trigger at a NEUTRAL position.
   • Always turn on the transmitter first. If the LED is not solid on, you need to check whether the batteries are good or incorrectly installed.

Reversing
Steering Reverse: Reverse the response direction when operating the steering wheel. Turning left steering wheel, the model turns right while turning right the model turns left. Throttle Reverse: Reverse the response direction when operating the throttle trigger. Pushing forward throttle trigger the model moves backward while pulling back, the model moves forward. If necessary you can just use a small screwdriver to adjust the responding switches.

Throttle Limit Switch
The slide switch to select the max forward speed:

1. Slowest
2. Intermediate
3. Fastest

RECEIVER CONNECTION AND INSTALLATION

Carisma MRS-24BL RX/ESC Unit Synchronization To Sync the Radio to the Car

RECEIVER CONNECTION AND INSTALLATION

MRS-24BL RX/ESC UNIT SETUP

ESC SETUP
Just use the TH. Trim to locate the Neutral Position. Nothing else to set. The ESC is a Forward and Brake/Reverse function.

1. LED indicator
   The LEO serves two functions:
   a. Indicate presence of TX
   b. Indicate the Battery Type
   selected Solid ON = NiMH
   Flashing • LiPo

2. Setting Battery Type
   a. TX power on and at the stop position
   b. Power on RX, wait for a few seconds, and then press and hold the RX button until the LED changes, the new battery type is updated.

3. Power Off reminder
   After the loss of TX signal over 5 sec, will use LED and servo to warn the user to POWER OFF the car, to avoid over-discharge and damaging the battery. . LEO quickly flashed 2 times per 2 sec. The servo will be moved once shortly per 10 sec.
   WARNING: Maximum is 2S LiPo (7.4V) DO NOT EXCEED this voltage, otherwise will damage and void the warranty.

BATTERY PACK & CHARGER MANUAL

MBC-241ST USB Charger
This charger is designed to charge the included 7.2V NiMH packs only. DO NOT charge any other type of battery. It is NOT intended for LiPo or Li•ion packs, or packs of a lower or higher voltage rating. When connected to a standard USB power source (500 mA or above is recommended), a red LED will light up indicating that the power is ON. During charging the maximum charging current is approx 100mA, and when the pack is fully charged, the charging current will drop. A typical time to fully charge a completed drained battery is 2 hours. After charging, disconnect the USB charger, and the pack. It is normal for the pack itself to feel slightly warm after charging.
NOTE: A partly discharged pack will take a shorter time to be fully charged. BUT, due to the physiology of the NiMH packs, and their tenancy for memory effect, it is always best to fully discharge and cycle NiMH packs. It may take a few cycles for your pack to reach its full potential.
REMEMBER: younger RC fans must always charge the pack under adult supervision, and never leave the charging pack unattended. The red LED will NOT turn off, it only indicates that USB power is present. It is advised that you set a timer to independently notify you when the 2-hour charge cycle is complete. Failure to adhere to the correct charging procedure can lead to permanent damage to the pack, and in extreme cases, fire or personal injury. Charge smart, charge safe, follow guidelines.

CE Compliance Information For The European Union
Carisma hereby declares that this product is in compliance with the essential requirements and other relevant provisions of the RED Directive 2014/53/EU, EN 301 489.1 V2.1.1, EN 301 489-17 V3.1.1, ETSI EN 300 328 V2.1.1

The associated regulatory agencies of the following countries recognize the noted certifications for this product as authorized for sale and use.
Products: CTX-2000, MRS-24BL
Equipment Class : 2 FCC Information
FCC ID YDTCTX-2000
Item Name : CTX-2000 2.4GHz Transmitter
The objects of the declaration described above are in conformity with the requirements of the specifications listed below. Manufactured By : Mun Ah Plastic Electronic Toys Company.,Ltd Statement – This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF Exposure Warning: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. And should be operated with a minimum distance of 20 cm between the antenna & your body.
Instructions for Disposal of WEEE by Users in the European Union
|This product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or where you purchased the product.
NCC Warning Statement
Article 12 Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the character and functions of the original design of the certified lower power frequency electric machinery. Article 14 The application of lower power frequency electric machinery shall not affect the navigation safety nor interfere a legal communication, if an interference is found, the service will be suspended until improvement is made and the interference no longer exists.

FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide residential protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
FCC Warning:
The equipment may generate or use radiofrequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. Modifications not authorized by the manufacturer may void the user’s authority to operate this device. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Limited Warranty
Warranty Period: Carisma R/C warrants that the CTX-2000 (“Product”) will be free from original factory defects in materials and workmanship upon purchase (“Warranty Period”). What is Not Covered – This warranty is not transferable and does not cover (a) cosmetic damage, (b) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (c) modification to any part of the Product, (d) attempted service by anyone other than a Carisma R/C authorized service center, or (e) Product not purchased from an authorized Carisma RC dealer.
OTHER THAN THE EXPRESS WARRANTY ABOVE, Carisma RC MAKES NO OTHER WARRANTY OR REPRESENTATION AND THEREFORE DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND SUITABILITY FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Purchaser’s Remedy – Carisma RC’s sole obligation and purchaser’s sole and exclusive remedy shall be that Carisma RC will, at its option, either (a) service or (b) replace, any Product determined by Carisma RC to be defective. Carisma RC reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Carisma RC. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability
CARISMA RC SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF CARISMA RC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Further, in no event shall the liability of Carisma RC exceed the individual price of the Product on which liability is asserted. As Carisma RC has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup, or assembly, the user accepts all resulting liability. If you see the purchaser or user are not prepared to accept the liability associated with the use of the Product, the purchaser is advised to return the Product immediately in new and unused condition to the place of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from country to country or state to state. Carisma RC reserves the right to change or modify this warranty at any time without notice.
MUN All PLASTIC ELECTRONIC TOYS CO., LTD.
Flat G, 21 Floor, Kingsway Industrial Building,
Phase 2, 173 -175 Wo Yi Hop Road,
Kwai Chung, NJ., Hong Kong.
Note: For official Carisma RC spare parts,
see your local hobby shop or place of purchase first.
If unavailable, parts can be ordered direct at:http://www.Carisma-shop.com.
Setup Notes
Shocks – Spring Rate & Preload:
FPV Add On Channel Used:
Battery Type & MAh Rating:
Motor Wind & Gearing:
IOther Setup Options Used:
PART DESCRIPTION

 15407 GT248 Steering Linkage
15410 GT249 Front Hub Set
15411 GT248 Rear Hub Set
15412 01249 Rear timg Mount Set
15413 01245 Chassis and Cover Set
15414 GT249 Body Post and Battery Cover
15415 GT248 Bearing Set
15416 GT245 Plastic Screw Nut For Wheel
15426 01248 Metal Pinion Gear
15429 80D3KV Mini 130 BrushVess Sensoress
15697 GT24B Rear Suspension km Set
15699 GT24TR Hardware Set
15696 GT248 Front Suspension Arm Sot| 15390 GT248 Servo Saver and Mount
15391 GT248 Shock Assembled (PR)
15392 01248 Front Gear Box Housing
15393 01248 Rear Gear Box Housing
15394 GT248 Differential Gear Set
15395 01248 Center Dave Shaft Set
15396 GT248 Slipper Set
15401 GT249 Motor Mount Set
121 15404 GT24B Cutdriee Set
15406 GT249 Rear Shock Tower
15434 GT248 Replacement Servo
15687 GT24TR Painted and Cecoratet Body
15694 GT24B Dog Bone Pair
16339 GT24TR 45 Shut Tire Set
---|---
|
---|---
https://www.carisma-shop.com| https://carismascaleadventure.com/support/

FOR DETAILED MANUAL AND PARTS FINDER. PLEASE GO TO HERE
Visit us on www.carisma-shop.com www.camasshop.com
Visitateci su www.carisma-shop.com
Besuchen sie uns auf www.carisma-shop.com
Visitez notre site www.carisma-shop.com www.carisme-shopscom
!2021 Carisma. AS Rights Reserved. Product specifications are subject to
change Some models shown are prototypes which
may vary slightly from what is inside_
Printed in China cpremai Stamper) in Line Gedruckt in China imehme on Chine EPISTIEPRIZYttfi,
MAN•000846

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>