SCANGRIP MULTIMATCH 8 LED Rechargeable Work Light Instruction Manual

: June 6, 2024
: SCANGRIP

Table of Contents

Documents / Resources
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MULTIMATCH 8
03.5654/03.5654AU/03.5654UK/03.5654US

Operating
5-step dimmer function and option to change between 5 color temperatures (2500K-6500K). Press and hold the power button for 2 sec. to change between CCT and light output level.

3 years warranty
PATENT PROTECTER

go to scangrip.com to register

WARNING-Risk of ﬁre Minimum distance from lighted objects 0.1m
MULTIMATCH 8

WARNING

Always respect applicable legislation for working with electrical equipment in order to reduce the risk of accidents
Avoid looking directly into the beam of light, as this will result in dazzling
Do not use the lamp near a naked ﬂame
Protect the mains cable from oil, heat, and sharp edges
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced
Luminaire is only suitable for direct mounting on non-combustible surfaces.
The external ﬂexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed
If the lamp is disconnected from mains and the battery is discharged, push the power button to enable an internal backup battery. 10% LED will blink to indicate backup mode
The red charging indicator lights up during charging
The green charging indicator lights up when charging is completed.

The process to delete the pin code is:

Turn on the Bluetooth function
Press the Bluetooth button for 10 second
The pin code is reset

Integrated BLUETOOTH light control

Turn the lamp on/off or adjust lamp output
Connect up to 4 lamps together
Adjust the color temperature in steps from 2500k-6500k
Assign Pincode to prevent other users from controlling the lamp

Compliant with iPhone 5 or higher / Android 5.0 or higher. Go to iTunes App Store / Download the app from our website

http://QRly.me/packaging-manuals/qr/nova-10k-bluetooth-app

Power bank

Built-in power bank with USB outlet to charge mobile devices
Output: 5V, 1A

The power bank will automatically shut down when the battery pack is discharged or removed. When using the power bank while the power supply is connected, the luminous output will be reduced to 75%.

Discarded electrical products must not be disposed of together with household waste. Please use recycling facilities. Ask your local authority or retailer for advice on recycling.

The battery must be removed from the device before it is broken up
The device must be disconnected from the mains when the battery is removed
Please dispose of the battery safely

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.

MANUFACTURER’S WARRANTY – Information for customers in Australia and New Zealand only
This SCANGRIP product is guaranteed for a period of 2 (two) years from the date of purchase. This guarantee shall become invalid if the product has been misused, tampered with, or accidentally damaged. If the product is defective, we undertake to repair or replace the product or any part of it that is defective; or wholly or partly recompense you if they are defective. This guarantee is in addition to other rights and remedies available to consumers, all of which are given by us to you if you are a consumer. Our goods come with guarantees that cannot be excluded under the Australian or New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
If you wish to make claim, please return this product to the original place of purchase together with your purchase receipt or go to our website www.scangrip.com and ﬁll out the claim form.

http://QRly.me/packaging-manuals/qr/03-5108-magpen-2-manual-1
SCANGRIP.COM
DESIGNED BY I lANGRIP IN DENMARK
EU DESIGN PATENT NO. 5597010
//SCANGRIP A/S Rytterhaven 9 DK-5700 DENMARK Made in China

V6/11.2021/CXQ

Documents / Resources

| SCANGRIP MULTIMATCH 8 LED Rechargeable Work Light [pdf] Instruction Manual
MULTIMATCH8, 2ATYV-MULTIMATCH8, 2ATYVMULTIMATCH8, 03.5654, 03.5654AU, 03.5654UK, 03.5654US, MULTIMATCH 8 LED Rechargeable Work Light, MULTIMATCH 8, LED Rechargeable Work Light
---|---