WiLIT W23 Eye-Protection LED Desk lamp with Pen Holder and Wireless Charger User Manual

June 6, 2024
WILIT

LED table lamp
User Manual

Product Introduction

Please read carefully before using and keep it properly

Operation Instructions

  1. Power Connection Insert the matched adapter head into the socket behind the lamp

Notice:

  • Please use the original power supply, do not use the cable extension or splitter, otherwise, the product may work abnormally.
  • Do not use an adapter that isn’t matched with output 12V.
  • If the lights flickered or are noisy, please timely check the power supply
  • Do not connect the adapter metal point with other metals, or permanent damage to your product or other dangers may result.
  • The original adapter is for this product only and does not support other users.

Light Operation

lamp brightness adjustment short press O button for dimming (dim-medium- bright-turn off in turn)

Wireless Charging Function

Put the equipment with technical standards on the middle of the logo to start charging

Notice: the light indicator is red when charging, and turns green when fully charged, if the red light is flashing, it means charging failure.

Illumination Angle Adjustment

warning: the adjustable range is up-down to 45 degrees, please do not over-adjusting their joint activity parts to avoid any damage to the lamp.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Package list

Note :  Product images and description only for reference purposes, due to product upgrading, the physical picture may be associated with some small differences in kind, please see the subject produce.

Specification

Model: W23
Working temperature: -20-S0°C
Rated power: 13W
Color temperature range: 42001400K
product name: Table lamp with wireless charging and pen holder Rated Voltage: 12V/1.0A
wireless charger power: SW Lamp size: 140450110mm

Cautions

  • Please wipe it with soft cotton fabric for surface cleaning, and do not use any corrosive solvents.
  • The light source is irreplaceable. Please stop use when actually worn out
  • If a failover occurs, please do not disassemble by yourself to avoid any damage to the product. You can contact the manufacturer for maintenance.

Harmful matter content

Material hazardous substance
(Pb) (Hg)
Metal X
Plastic 0
Wire 0
PC BA board 0

The form is based on the standard of SJ/T 11364:
o : The hazardous substance is under the limit of the standard of GB/T 26572 in all homogeneous materials of the component.
x : The hazardous substance is in excess of the standard of GB/T 26572 in at least one homogeneous material of the component

Product Warranty regulation

The warranty services of this product are strictly in accordance with Consumer Protection Law and The product quality law of China. If there is a performance fault listed in the ‘product performance fault table” after checking by the after-sale service center, the service content is as follows:

  • Within 7 days after receiving the product, it is free to enjoy the refund and exchange service.
  • Within 8-15 days after receiving the product, it is free to enjoy replacement or maintenance service.
  • Within 12 months after receiving the product, it is free to enjoy maintenance service.

Non-warranty regulation

  • Unauthorized maintenance, misuse, collision, neglect, abuse, fluid intake, accident, altered or tear up labels/anti-fake label;
  • Exceed the warranty validity date;
  • Damage caused by force majeure;
  • Troubles are not on the range of “product performance fault table’
  • The human-caused performance failure but listed in the product performance fault table”, including use of dimmer/non-rated voltage/non-specified environment.

Product performance fault table

model Performance failure
W23 1. the light doesn’t work

2. lamp flickering
3. Unable to turn on the light
4. Slow wireless charging
5. shell is damaged due to structural or material factors

  1. You’re advised to keep the packing boxes for at least 30 days after receiving since the packing boxes are used to ensure the safety of transportation;
  2. This product is only sold in China mainland (excluding Hong Kong, Macao, and Taiwan), so the warranty is for China mainland only(excluding Hong Kong, Macao, and Taiwan.

Warranty card

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals