WILIT B18 LED Table Lamp User Manual

June 13, 2024
WILIT

WILIT B18 LED Table Lamp

WILIT B18 LED Table Lamp

Plug in the power adapter, the display automatically turns on, the buzzer beeps twice, and the wireless charging indicator lights up red and green at the same time.

WILIT B18 LED Table Lamp

Product Usage

Instructions for wireless charging:

Put the electronic product that supports wireless charging in the middle of the non-slip mat. When normal charging lime, the indicator light turns on red, and when ii is full, the green light turns on. If the red light flashes, ii means there is a malfunction. Check whether there is metal in the center of the non-slip mat.

Time setting

Short press the “S” key to switch between 12/24 hour format, long press for 2 seconds to enter the setting time mode, the sequence is: hour, minute. The set item flashes, press the • or v key to adjust the time up or down, long press 2 seconds can be quickly adjusted , and it will exit automatically in 5 seconds without operation.

Alarm setting

Long press the “M” key for 2 seconds to enter the alarm setting mode, press the “M” key to switch the hour, minute, and wake up light, and press the “A ” o~’v” key to set the time

Wake up light

Long press the “M” key, short press the “M” key, adjust to “OFF/ON” and press “•” or “V”, “OFF “turns off the wake-up light, “ON” turns on the wake-up light, and the wake-up light turns on 10 minutes before the set alarm time, the brightness increased.

Alarm clock/wake-up light on:

In lime travel mode, long press any key of the snooze button (2 front foot pads) for 2 seconds to turn on/off (the wake-up light is set to ON to turn on the wake-up light function)

Wake-up light operation:

Touch the light pole when the wake-up light is on, the wake-up light will stop.

Snooze function:
When the alarm sounds, press any one of the snooze buttons (2 front foot pads) to enter the snooze, and press the snooze button during the snooze model to cancel the snooze function. If there is no operation, the alarm will stop automatically in 10 minutes.

Display brightness adjustment:

Short press the snooze button to adjust the brightness in lime travel mode. 3 levels of LED light: low, medium and high brightness.

Warranty Card

Applicable for

Since the date of purchase, free service is guaranteed for one year under normal use. If beyond the warranty period , the cost of components will be charged.

If the replaced components service are required, the cost will be charged according to our price list of spare parts maintenance.

Under the following cases, the one-year free warranty service is not available.

  1. Damage caused by non-normal use and natural disasters, such as earthquake and rat disaster.
  2. Unauthorized maintenance, misuse, collision, negligence, abuse, accident, alteration, incorrect use of accessories that do not belong to the product.
  3. Information in warranty card is not complete, such as purchase dale and seller’s seal and chop are not included.
  4. Special environment is not included in warranty scope, such as wet, Sulphur areas, high salinity areas beside the sea, and corrosive areas.
  5. Not following the instructions.
  6. Special offer.

In order to avoid damage during transportation, please pack the products carefully when returning for maintenance.

The manufacturer shall not be responsible for the breakdown of the product caused by customers’ dismounting.

Important!

Thank you for purchasing our products.
To ensure your rights, please fill in this form carefully, thank you.

Product Parameter

Rated Voltage 12V/1A Wireless Charger SW
Rated Power 12W

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
    This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals