OEM TA298 Indoor/Outdoor Temperature Hygrometer User Manual
- June 6, 2024
- OEM
Table of Contents
OEM TA298 Indoor/Outdoor Temperature Hygrometer
TA298 indoor and outdoor temperature hygrometer manual Uses:This product is
suitable for,factories, warehouses, building air conditioning
management,hospitals, aquaculture species,room, office,hote laboratory….Modern
energy saving good helper. The machine can be hung on the wall or on the
table,on the back there is a hook and bracket Measuring range:outdoor
-40C~70(-40~158F) degree of error:0.1c(0.1c) Indoor0C-50(32F~122″F) Humidity
10%~99%土5%Resolution 1%
Function Test:Press MAX/MIN key once to display the previous maximum/minimum
indoor and outdoor temperature and humidity values When the MAX/MIN press the
RESET button once to clear a previously memorized maximum or minimum Remeasure
When the MAX/MIN 8 seconds after the display returns to the current
temperature and humidity display C/F key Celsius and Fahrenheit Conversion
Time Debugging
- In the initial state, press and hold[MODE] for 2 seconds, the number of minutes the current time starts flashing, press the[ADJ] to adjust the hours, minutes. In normal time display mode, press the[ADJ]can be converted to 12/24 show.
- In the current clock model(clock and minutes between two blinks once per second), press[MODE]once, switch the display to alarm mode(clock and minutes between two points is not flashing), press lives [MODE]for 2 seconds, the alarm time flashes, press the [ADJ]can adjust the alarm time, minute. The alarm mode is displayed, press[ADJ] to set/cancel the alarm function. After setting press the[MODE]returns to normal time display. This product uses 1.5v AAA batteries Extemal 1.5 m water temperature sensors Fonts appear blurred, replace the battery.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>