DEFENDER 4K1T4BX 4K Ultra HD Wired 4-Channel Security System with 4 Cameras User Guide

QUICK START GUIDE
4K1T4Bx, 4K2T8Bx, 4K4T16Bx

WHAT’S INCLUDED

NOTE: Some parts listed below show a range based on your system’s configuration

Model: 4K1T4Bx
• DVR with 1 TB HDD
• (1 – 4) x 4K Analog HD Cameras
• (1 – 4) x 60 ft. BNC Cables
• 1 x Camera Power Adapter
• 1 x 4-Way Power Splitter| Model: 4K2T8Bx
• DVR with 2 TB HDD
• (4 – 8) x 4K Analog HD Cameras
• (4 – 8) x 60 ft. BNC Cables
• (1 – 2) x Camera Power Adapters
• (1 – 2) x 4-Way Power Splitter| Model: 4K4T16Bx
• DVR with 4 TB HDD
• (8 – 16) x 4K Analog HD Cameras
• (8 – 16) x 60 ft. BNC Cables
• (2 – 4) x Camera Power Adapters
• (2 – 4) x 4-Way Power Splitter
---|---|---

All kits include the following items:
1 x HDMI Cable, 1 x Ethernet Cable, 1 x DVR Power Supply, 1 x USB Mouse, 1 x Quick Start Guide, 1 x Window Warning Sticker

PRODUCT SUPPORT
Scan this QR code for instant access to all 4K Support Videos, Manuals and FAQs.

https://support.defendercameras.com/hc/en-us/categories/360002994911 -Defender-4K

WHAT YOU’LL NEED

• TV or Monitor
• USB Flash Drive (to complete the DVR activation GUID)
• Hammer Drill & Appropriate Bit
• Phillips (#2) Screwdriver
• Ladder (if required)
• Cable Protectors (if required)

FCC / IC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

IC STATEMENT
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

4CH & 8CH WHITE PLASTIC DVR SETUP

PLEASE READ FIRST!
You must connect your DVR to a monitor/TV to complete the setup. We recommend verifying all accessories and completing DVR setup before installation. For your best viewing experience, we recommend using a 4K TV or monitor to view your footage.

1. Connect the monitor, USBmMouse, cameras, modem/router, and power to the DVR based on the color and image labels:
   A Cameras: Connect the BNC (YELLOW) connector to the camera and DVR. Connect the power (RED) connector to the camera and power adapters.
   B Camera Power: Connect the Camera to the 4-Way Power Splitter(s) and the Camera Power Adapter(s) to a power outlet.
   C Monitor: Connect the HDMI (BLUE) cable to the DVR and monitor (not included).
   D USB Mouse: Connect the USB mouse (GREEN) to the DVR.
   E Modem/Router : Connect the Ethernet cable (PURPLE) to the Ethernet port (RJ45) on the DVR and your modem/ router. (NOTE: Wired Ethernet connection required, DVR cannot connect to the modem/router via Wi-Fi.)
   F DVR Power: Connect the DVR power cable to a power outlet.

2. Follow the Activation and Setup Wizard on the monitor/TV to set up the DVR. NOTE: YOU WILL NEED A USB FLASH DRIVE TO COMPLETE THE SET UP (Not included)

A Power LED: indicates the DVR is ON
B Data LED: data is being read or written to HDD
C Network LED: DVR is connected to a network

8CH & 16CH BLACK METAL DVR SETUP

PLEASE READ FIRST!
You must connect your DVR to a monitor/TV to complete the setup. We recommend verifying all accessories and completing DVR setup before installation. For your best viewing experience, we recommend using a 4K TV or monitor to view your footage.

1. Connect the Monitor/TV, USB mouse, cameras, modem/router, and power to the DVR based on the color and image labels:
   A Cameras: Connect the BNC (YELLOW) connector to the camera and DVR. Connect the power (RED) connector to the camera and power adapters.
   B Camera Power: Connect the Camera to the 4-Way Power Splitter(s) and to a power outlet.
   C USB Mouse: Connect the USB mouse (GREEN) to the DVR.
   D Monitor/TV: Connect the HDMI (AQUA) cable to the DVR and monitor/TV (not included).
   E Modem/Router: Connect the RJ45 port of the Ethernet (PURPLE) cable to the DVR and modem/router. (NOTE: Wired Ethernet connection required, DVR cannot connect to the modem/router via Wi-Fi.)
   F DVR Power: Connect the DVR power cable to a power outlet.
   G Power Switch : Turn the DVR power switch ON. Turn on the monitor/TV.

2. Follow the Activation and Setup Wizard on the monitor/TV to set up the DVR. NOTE: YOU WILL NEED A USB FLASH DRIVE TO COMPLETE THE SET UP (Not included)

A Power LED: (White) the DVR is ON
B Data LED: (Red) data is being imported/exported
C Network Connection LED: (White) DVR is connected to a network
D USB Port: (USB Flash drive not included)

DVR ACTIVATION

WARNING: DO NOT RIGHT-CLICK ON THE SCREEN BECAUSE YOU WILL BE UNABLE TO COMPLETE THE SECURITY QUESTIONS.

1. ADMIN PASSWORD
   • Create your DVR password (the system does not have a default password it must be created) – PLEASE REMEMBER YOUR PASSWORD! Defender cannot reset your password for you.
   • Confirm the password.
   • Create an IP Camera Activation code (this is only to complete this screen – IP cameras are not available from Defender for the 4K system).
   • Make sure the Security Question check-box is enabled.

2. SECURITY QUESTIONS
   • Select 3 Questions and enter your Answers.
   • Security Questions can be used to access your system if you forget your password.
   • REMEMBER YOUR ANSWERS!
   RECOMMENDED – GUID Export
   • Use the export option to save your Password and Security Questions to a USB Flash Drive. These settings can be imported later if you Forgot Password and Import GUID.
   • Insert your USB Flash Drive in the DVR and click Yes.
   • Device Name should be the name of the USB.
   • Select the file type *.bin.
   • Click Export to copy the Security Settings to the USB Flash Drive.

3. UNLOCK PATTERN
   • Draw an Unlock Pattern to access your system instead of entering the password.
   • Click & Drag to draw the pattern – you must connect at least 4 dots.

DVR SETUP WIZARD

1. SIGNAL INPUT STATUS
   Displays the type of camera that can be connected to the DVR. All cameras should be HD/CVBS. IP Cameras are not available from Defender for the 4K Systems.

2. LANGUAGE
   Select the System Language. The DVR Menu will show in the language selected.

3. WIZARD
   Select the check-box if you want the Setup Wizard to show every time the DVR is powered On.

4. TIME & DATE FORMAT
   Select your Time Zone, Date Format, System Date, and System Time.

5. NETWORK CONNECTIONS
   Displays the IP and server address details form your network when the DVR is connected to your modem/router.
   Changes are only required if you use a static IP address.

6. MOBILE APP ACCESS
   Select Enable to allow the Defender 4K system to be paired with the Defender 4K app. Ensure that your DVR is connected via the Ethernet port to an active Internet connection for this step to work.
   Once you check the Enable box for the Mobile App Access, our Service Terms screen will pop up. You will need to check the box and set up a verification code on the top of the page in order to click Ok and get back the the previous screen.
   To opt out of mobile App access, leave the Enable box unchecked and go directly next step.
   Download the Defender 24-7 mobile app from your app store. Open the app on your device.
   DO NOT DOWNLOAD:
   NOTE: The code is valid for 30 mins. Please check your junk mail
   

7. NETWORK PORTS
   Displays the details and status of the DVR ports. Changes are only required for advanced users.
   

8. DVR HDD
   Displays the details and status of the hard drive installed in your DVR. You can format the hard drive from this screen, however the DVR hard drive is preformatted and does not require formatting during setup. DVR HDD information display also can be found at Menu -> HDD Settings

9. NETWORK STATUS
   Displays the details and status of the devices connected to your DVR. Changes are not required on this screen.
   Network status also can be found at Menu -> Configuration -> Network

10. RECORDING OPTIONS
    Select the DVR recording options: Continuous records all day and Motion Detection records when motion is detected.
    The option selected will be applied to all cameras (channels). You can change the recording schedule at any time from the DVR main menu.
    

When the Setup Wizard is complete the Live View screen will open. From this screen you can use the mouse to access the DVR menu (by right clicking on the mouse) to change settings and to playback recorded footage. Use the scroll wheel to switch the camera in view or double click an image to open in full screen.

DEFENDER 24-7 APP MAIN SCREEN

A Playback: Tap to playback video starting on a specific date and time, on any number of active channels.
B Screen Options: Tap to change the view on this screen from list to thumbnail view, and vice versa.
C Search: Tap to search footage from the Device, Channels (Cameras), and Favorites.
D Add: Tap for the following options:
• Scan QR Code – To add another device or to share your device with other mobile devices.
• Manual Adding – Tap the field to enter the serial number of the DVR located on either the top or bottom of the DVR
• Online Device – To add a device on the same network as your phone. This option is not recommended when adding your DVR.
• Add to Favorites – Tap to add this device to your favorites list.
E Recent Live View: Tap to open the last live view screen, with the previous viewing configurations
F Camera List: Tap the arrow to expand or collapse each DVR’s list of cameras.
G Camera Live View: Tap a camera in the DVR list to see this quick live preview of the camera.
H App Screens: Tap to open other features and settings in the app (notifications and settings).

DEFENDER 4K APP NOTIFICATION SETTINGS

1. Make sure DVR is connected to the internet and app access is enabled. Go to Menu > Configuration > Network
2a. Motion Setting: Go to Menu > Camera Settings > Motion Make sure “Enable Motion Detection” is checked, then click Settings to enable push notification for mobile app
2b. Once the Settings is clicked, a new window should pop up.
Select the Trigger Channels

2c. Go to Linkage Action to make sure Enable push notification for mobile app is checked, then apply the setting
IMPORTANT: If your DVR is a Black Box, please repeat the same step of motion detection linkage for VCA linkage (Menu > **Camera Setting > VCA)
NOTE: If your DVR is a White Box, you do not have the VCA function.**

App Settings
3a. More > Settings > Enable Push Notification

App Settings Continued
3b. 24-7 > Recent Live View > Enable Alarm Notification

Visit our website to download your manual, view set-up videos or contact our Support Team.
DefenderCameras.com/support

DEFENDER® does not endorse any DEFENDER ® products for illegal activities. DEFENDER ® is not responsible or liable in any way for any damage, vandalism, theft, or any other action that may occur while a DEFENDER ® product is in use by the purchaser. We reserve the right to change models, configurations, or specifications without notice or liability. Product may not be exactly as shown.
©2021 DEFENDER®. All rights reserved. DEFENDER ®, the DEFENDER ® logo and other DEFENDER ® marks may be registered. All other Trademarks are the property of their respective owners.

REV11003312021

Visit WWW.DEFENDERCAMERAS.COM/SUPPORT to get additional help from the full product manual and support videos

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>