SCHIIT MODI 3E Digital to Analog Converter Owner’s Manual
- June 6, 2024
- SCHIIT
Table of Contents
MODI 3E Digital to Analog Converter
Owner’s Manual
CONNECTIONS
- RCA Analog Outputs. Connect the two RCA jacks, to your amp, preamp, or receiver.
- Coaxial Digital Input. Connect a coaxial digital source, using an RCA cable, 75 ohms preferred.
- Optical Digital Input. Connect an optical source to the optical input jack, using a Toslink cable.
- USB Data and Power Input. Connect a USB source using a USB micro cable (supplied).
- Power Input. Connect the supplied 5V power source if you need external power.
OPERATION
If you’re using Modi 3E as a USB-only DAC, you don’t need Power Input.
Just connect it to your computer with the supplied USB Micro cable and you’re
set.
If you’re using the other digital inputs, and you’re NOT using USB, you
need Power Input. Connect the supplied USB wall-wart with the supplied USB
Micro cable to provide power for the other inputs. Modi 3E won’t work without
power, and power comes from a USB.
CONTROLS
- Power LED. This lights up when you have Modi 3E plugged into a computer, or into an external power source. It doesn’t signal UFOs or anything.
- Input Selector. Use the toggle switch to select what you want to listen to.
Top: Unison USB™ input
Middle: Optical (Toslink) input
Bottom: Coaxial input
Pretty straightforward, right?
TROUBLESHOOTING
“Draws too much power” error. You’ll need to use additional power.
Disconnect Modi 3E from your source, then connect the wall-wart to the Power
Input using the USB Micro cable. The Modi 3E will then report as a 0mA USB
device. You’ll need another cable to connect to your source.
No sound? Make sure Modi 3E is selected in Control Panel (Windows) or
System Prefs (Mac) AND in your player software.
2-YEAR LIMITED WARRANTY
Schiit Audio warrants to the original purchaser that this product shall be
free from defects in material and workmanship for two (2) years from the date
of purchase. If a defect covered by this warranty occurs during this period,
Schiit Audio will repair the defective product, free of charge. The date of
purchase will be based on customer receipts, otherwise, the date of
manufacturing will be used.
If you believe you need warranty service, contact us first. Schiit Audio
products sent back to us without a Return Authorization (RA) will be returned
to the sender without repair. To contact us and obtain an RA, email
info@schiit.com.
Warranty Limitations. This warranty shall not apply if a product: (a) is
modified or tampered with; (b) is damaged by negligence, accident,
unreasonable use, or other causes unrelated to defective materials or
workmanship, or (c) has had the serial number altered or removed. Any implied
warranties, including warranties of merchantability and fitness for a
particular purpose, are hereby limited in duration to the warranty period of 2
years. In no event shall Schiit Audio be liable for consequential or
incidental damages resulting from the breach of any implied or expressed
warranties. Some states do not allow these limitations, so they may not apply
to you. You may also have other rights which vary from state to state or
province to province.
Application for Council Directives 72/23/EEC, 89/336 EEC Conformity declared for EN60065, EN55022 Class B, EN50082-1
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
IN THE BOX
- Modi 3E
- 5V USB Wall-Wart
- USB Micro Cable
Documents / Resources
|
SCHIIT MODI 3E Digital to Analog
Converter
[pdf] Owner's Manual
MODI 3E, Digital to Analog Converter, MODI 3E Digital to Analog Converter
---|---
|
SCHIIT Modi 3E Digital To Analog
Converter
[pdf] Owner's Manual
Modi 3E Digital To Analog Converter, Modi 3E, Digital To Analog Converter
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>