Adexa JHR-2000S Infrared Patio Heater 2kW Free Standing Instruction Manual

Instruction Manual

This instruction carefully before using your new heater.

Caution Only use the heater on a firm solid horizontal area where all the feet on the base arc in contact with the floor.

1. Site the heater outside or in a large open area and well away from any obstructions such as branches or where the heater is near any objects that can be affected by heat, such as furniture, curtains, or other inflammable objects (minimum distance 1 meter).
2. Do not use near bathtubs, wash areas, or swimming pools.
3. Do not use in unventilated areas
4. Do not use where gas, petrol, paint, or other inflammable goods are stored.
5. Do not push any items through, obstruct or cover the grill of the heater head.
6. Do not position immediately above or below an electrical socket.
7. Do not move when connected to an electrical supply and always wait for the patio heater to cool down before storing away.
8. Do not touch the heater head when in use.
9. Do not leave turned on and unattended especially when children and or animals are in the vicinity.
10. The indication of the different positions of switches shall be visible from a distance of IN.
11. The Marking concerning covering shall be visible after the heater has been installed. It shall not be placed on the back of portable heaters.
12. The unit must be fixed with a clearance of 100cm to the wall and 30cm to the ceiling.
13. The unit must be correctly installed according to the instructions. Make sure the head is at least I .8m from the floor.
14. The unit must be securely fixed on a horizontal and flat surface.
15. The unit is at a high temperature during operation. It keeps hot for a period after shut down. The potential danger would occur when touching it during this period.
16. Don’t fix the unit closed to a curtain and/or other flammable objects. Otherwise, there will be a danger of catching fire.
17. Don’t cover the unit with anything during operation or a short time after it’s shut down.
18. Don’t wrap the power supply cord on the unit.
19. The unit must be handled with care, and avoid vibration or hitting.
20. The unit must be securely grounded during operation.
21. If the unit gets damaged, it must be repaired by professional electricians.
22. When the power supply cord is damaged, it must be replaced by an authorized agent or other professional people to avoid danger.
23. The unit must not be fixed under a socket.
24. When assembling, keep clear from any board or flammable material.
25. The unit must be supervised by adults if it’s used by a child.
26. It is not safe to install the unit by a swimming pool, in a bathroom, or shower area.
27. The unit is for household use only. It is not safe to use on a building site, greenhouse, barn, or stable where there’s flammable dust.
28. The head of the unit is at a high temperature during operation. Unplug the unit and wait till it cools before cleaning.
29. Don’t use this unit in place where causticity or volatile air exists, i.e. dust, steam, gas, etc.
30. Don’t use this unit as a cloth drier or towel drier.
31. Don’t use this unit as a sauna heater.
32. Don’t use this unit as a room heater.
33. Don’t use this unit in place of animal propagating and raising.
34. Don t immerse this unit into the water for cleaning.
35. The unit should be plugged in a socket, which is easily visible and reachable.
36. Two Dark points may exist on the surface of the heating elements during the first few minutes after it is turned on. This is normal, and will not affect the performance of the unit.

Unpack the heater making sure that all the items are present and that there are no components left in the box and that the heater head is free from any packing material.
Using the detailed drawing follow the steps to assemble your heater.
Do not connect the heater to the electrical supply until all the assembly is complete.
Do not connect the heater to the electrical supply if any of the components or the power cord is damaged in any way.
If in doubt contact your supplier

Assembling Process

1. Fixed the upper pipe together with heater head assembly with 1PCS Screw. See image.
2. Connect the middle pipe and upper pipe one by one. See image.
3. Fixed the lower pipe together with the bottom plate with 4PCS. See image 3.

Care and maintenance

When disconnected from the electrical supply, clean the outside of the patio heater with a damp cloth. Never use corrosive or solvent cleaners or immerse in water.
Any maintenance or repairs including replacing the halogen tube should only be carried out by a qualified electrician or by a recommended service center.

DISPOSAL

Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

Imported by:
Adexa Direct Limited
UNIT 1 SWIFT POINT, COSFORD LANE, SWIFT VALLEY IND EST, RUGBY CV21 1QN
Telephone: 01483 931040
Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>