Shenzhen Xiantaistar Technology 7003WS Anti-Stress Gel Silicone Wireless Mouse Instructions
- June 6, 2024
- Shenzhen Xiantaistar Technology
Table of Contents
Shenzhen Xiantaistar Technology 7003WS Anti-Stress Gel Silicone Wireless
Mouse
2.4G Wireless Mouse Manual
Firstly. 2.4G Wireless Mouse Packing Content
- 2.4G wireless mouse * 1 pcs
- Mini receiver * 1pcs
- Manual * 1 sheet
Secondly. First Using
- Open power on key on the bottom( The mouse without Power Key will bright up for 2 seconds directly)
- Insert the mini receiver into computer USB port
- Wireless mouse installation has been finished and need to wait for 5 seconds for the first using
Thirdly. Mouse Functions Introduction
-
Cursor movement speed switch
There are three speeds 800 1200 1600 for switch. Incipient default settting is 1200 DPI. And you could switch circularly with the front button on the top of mouse. -
Power on/off function
It could be powered off on the bottom of the mouse when it hasnt been used for a long time so as to savepower maximal -
Arousal function
If the mouse hasn’t been used for a long time, it will enter dormancy at first 2 minutes. When using, you just remove the mouse and it will wake up; If it hasnt been used for 5 minutes it will enter deep dormancy and it should be clicked the left or right-click to wake up.
Fourthly. Attention
- It will be influenced to use on the reflect light or serious rugged surface.
- Don’t keep the mini receiver and BlueTooth receiver closed.
- Don’t not disassemble the mouse or mini receiver
- Please use dry and soft cotton goods to clean the mouse
About Wireless Field Illustration
This product RF frequency is 2.4Ghz to meet Euro request for radiation which wont harm to human . Wireless launching will generate electromagnetic signal . I f there are places to use cardiac pacemakers or related physical instrument, please use them with caution.
Technical Specifications
- Mouse norminal voltage1 PCS 400mA internal battery
- Mouse norminal current 13MA
- Mouse tracking system Red light
- Resulotion 800/1200/1600dpi adjustale
- USB portLowest request 1.1 version
- Wireless distance：8-12M（normal situation）
FCC
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following
two conditions: (1) This device may not cause harmful interference, and (2)
this device
must accept any interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.