Shenzhen Xiantaistar Technology C882 2.4G Wireless Mouse User Manual

Shenzhen Xiantaistar Technology C882 2.4G Wireless Mouse

Parameter

• Mouse Model: C882
• Mouse Size: 1057559mm
• Mouse Weight: 92 grams
• Buttons: 6
• Battery: Built-in 400mAh Battery
• Recharging Time: About 3 Hours
• Recharging Port: Android port
• DPI: 800-1200-1600

Using

1. Turn on the Power Key
2. Insert the mini receiver into computer USB port
3. Wireless mouse installation has been finished and need to wait for 5 seconds for the first using

Mouse Functions Introduction

1. Cursor movement speed switch
   There are three speeds 800 1200 1600 for switch. Incipient default setting is 1200 DPI. And you could switch circularly with the front button on the top of mouse.

2. Power on/off function
   It could be power off on the bottom of mouse when it hasn’t been used for a long time so as to save power maximal

3. Arousal function
   If mouse hasn’t been used for a long time, it will enter dormancy at first 2 minutes. When using, you just remove the mouse and it will awake up; If it hasn’t been used for 5 minutes it will enter deep dormancy and it should be clicked the left or right click to awake up.

4. Charging
   Please insert USB charging cable to charge fro few hours, when the light is off or it happen Yellow light,it finishes charging.

System Compatible

Almost all devices with USB port could be compatible. 3 systems: Windows,MAC/IOS,Android

Fault Checking

1. When the mouse moved slowly but it is normally used, the battery should be running out,which needs to be charged.
2. If the mouse couldn’t used fluently, please make sure the using environment is clear and flat.
3. When plug in USB, it should wait for few seconds to connect and the mouse needs to close to USB for fast connection.
4. When use, it should plug in USB first, otherwise the mouse will be dormancy without signal.

Attention

1. It will be influenced to use on the reflect light or serious rugged surface.
2. Keep the receiver plug-in when use.
3. Don’t not disassemble the mouse or mini receiver
4. Please use dry and soft cotton goods to clean mouse

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>